[PATCH v2 1/6] ASoC: amd: acp: Add generic support for PDM controller on ACP

[Ajit Kumar Pandey]

On 1/14/2022 12:04 AM, Pierre-Louis Bossart wrote:
> [CAUTION: External Email]
> 
> couple of nit-picks:
> 
> 
>> diff --git a/sound/soc/amd/acp/acp-pdm.c b/sound/soc/amd/acp/acp-pdm.c
>> new file mode 100644
>> index 000000000000..cb9bbd795eee
>> --- /dev/null
>> +++ b/sound/soc/amd/acp/acp-pdm.c
>> @@ -0,0 +1,181 @@
>> +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
>> +//
>> +// This file is provided under a dual BSD/GPLv2 license. When using or
>> +// redistributing this file, you may do so under either license.
>> +//
>> +// Copyright(c) 2021 Advanced Micro Devices, Inc.
> 
> 2022?
> 
>> +//
>> +// Authors: Ajit Kumar Pandey <AjitKumar.Pandey at amd.com>
>> +//       Vijendar Mukunda <Vijendar.Mukunda at amd.com>
>> +//
>> +
>> +/*
>> + * Generic Hardware interface for ACP Audio PDM controller
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/module.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <sound/pcm_params.h>
>> +#include <sound/soc.h>
>> +#include <sound/soc-dai.h>
>> +#include <linux/dma-mapping.h>
> 
> alphabetical order?
> 
>> +
>> +#include "amd.h"
>> +
>> +#define DRV_NAME "acp-pdm"
>> +
>> +#define PDM_DMA_STAT         0x10
>> +#define PDM_DMA_INTR_MASK    0x10000
>> +#define PDM_DEC_64           0x2
>> +#define PDM_CLK_FREQ_MASK    0x07
>> +#define PDM_MISC_CTRL_MASK   0x10
>> +#define PDM_ENABLE           0x01
>> +#define PDM_DISABLE          0x00
>> +#define DMA_EN_MASK          0x02
>> +#define DELAY_US             5
>> +#define PDM_TIMEOUT          1000
>> +
>> +static int acp_dmic_dai_trigger(struct snd_pcm_substream *substream,
>> +                            int cmd, struct snd_soc_dai *dai)
>> +{
>> +     struct acp_stream *stream = substream->runtime->private_data;
>> +     struct device *dev = dai->component->dev;
>> +     struct acp_dev_data *adata = dev_get_drvdata(dev);
>> +     u32 physical_addr, size_dmic, period_bytes;
>> +     unsigned int dma_enable;
>> +     int ret = 0;
>> +
>> +     period_bytes = frames_to_bytes(substream->runtime,
>> +                     substream->runtime->period_size);
>> +     size_dmic = frames_to_bytes(substream->runtime,
>> +                     substream->runtime->buffer_size);
>> +
>> +     physical_addr = stream->reg_offset + MEM_WINDOW_START;
>> +
>> +     /* Init DMIC Ring buffer */
>> +     writel(physical_addr, adata->acp_base + ACP_WOV_RX_RINGBUFADDR);
>> +     writel(size_dmic, adata->acp_base + ACP_WOV_RX_RINGBUFSIZE);
>> +     writel(period_bytes, adata->acp_base + ACP_WOV_RX_INTR_WATERMARK_SIZE);
>> +     writel(0x01, adata->acp_base + ACPAXI2AXI_ATU_CTRL);
> 
> could this be done in a .prepare step?
> 
>> +
>> +     switch (cmd) {
>> +     case SNDRV_PCM_TRIGGER_START:
>> +     case SNDRV_PCM_TRIGGER_RESUME:
>> +     case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
>> +             dma_enable = readl(adata->acp_base + ACP_WOV_PDM_DMA_ENABLE);
>> +             if (!(dma_enable & DMA_EN_MASK)) {
>> +                     writel(PDM_ENABLE, adata->acp_base + ACP_WOV_PDM_ENABLE);
>> +                     writel(PDM_ENABLE, adata->acp_base + ACP_WOV_PDM_DMA_ENABLE);
>> +             }
>> +
>> +             ret = readl_poll_timeout_atomic(adata->acp_base + ACP_WOV_PDM_DMA_ENABLE,
>> +                                             dma_enable, (dma_enable & DMA_EN_MASK),
>> +                                             DELAY_US, PDM_TIMEOUT);
>> +             break;
>> +     case SNDRV_PCM_TRIGGER_STOP:
>> +     case SNDRV_PCM_TRIGGER_SUSPEND:
>> +     case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
>> +             dma_enable = readl(adata->acp_base + ACP_WOV_PDM_DMA_ENABLE);
>> +             if ((dma_enable & DMA_EN_MASK)) {
>> +                     writel(PDM_DISABLE, adata->acp_base + ACP_WOV_PDM_ENABLE);
>> +                     writel(PDM_DISABLE, adata->acp_base + ACP_WOV_PDM_DMA_ENABLE);
>> +
>> +             }
>> +
>> +             ret = readl_poll_timeout_atomic(adata->acp_base + ACP_WOV_PDM_DMA_ENABLE,
>> +                                             dma_enable, !(dma_enable & DMA_EN_MASK),
>> +                                             DELAY_US, PDM_TIMEOUT);
> 
> is the _atomic needed?
> 
>> +             break;
>> +     default:
>> +             ret = -EINVAL;
>> +             break;
>> +     }
>> +
>> +     return ret;
>> +}
>> +
>> +static int acp_dmic_hwparams(struct snd_pcm_substream *substream,
>> +     struct snd_pcm_hw_params *hwparams, struct snd_soc_dai *dai)
>> +{
>> +     struct device *dev = dai->component->dev;
>> +     struct acp_dev_data *adata = dev_get_drvdata(dev);
>> +     unsigned int dmic_ctrl, channels, ch_mask;
>> +
>> +     /* Enable default DMIC clk */
>> +     writel(PDM_CLK_FREQ_MASK, adata->acp_base + ACP_WOV_CLK_CTRL);
>> +     dmic_ctrl = readl(adata->acp_base + ACP_WOV_MISC_CTRL);
>> +     dmic_ctrl |= PDM_MISC_CTRL_MASK;
>> +     writel(dmic_ctrl, adata->acp_base + ACP_WOV_MISC_CTRL);
> 
> .hw_params can be called multiple times, should this clock handling be
> done in a .prepare step?
> 
> Or alternatively in .startup - this doesn't seem to depend on hardware
> parameters?
> 
>> +
>> +     channels = params_channels(hwparams);
>> +     switch (channels) {
>> +     case 2:
>> +             ch_mask = 0;
>> +             break;
>> +     case 4:
>> +             ch_mask = 1;
>> +             break;
>> +     case 6:
>> +             ch_mask = 2;
>> +             break;
>> +     default:
>> +             dev_err(dev, "Invalid channels %d\n", channels);
>> +             return -EINVAL;
>> +     }
>> +
>> +     if (params_format(hwparams) != SNDRV_PCM_FORMAT_S32_LE) {
>> +             dev_err(dai->dev, "Invalid format:%d\n", params_format(hwparams));
>> +             return -EINVAL;
>> +     }
>> +
>> +     writel(ch_mask, adata->acp_base + ACP_WOV_PDM_NO_OF_CHANNELS);
>> +     writel(PDM_DEC_64, adata->acp_base + ACP_WOV_PDM_DECIMATION_FACTOR);
>> +
>> +     return 0;
>> +}
> 
>> +MODULE_LICENSE("GPL v2");
> 
> "GPL" is enough
> 
> 
Thanks, will try to adopt commnets in v3 patch chain