[PATCH] dt-bindings: Drop required 'interrupt-parent'

Suman Anna s-anna at ti.com
Fri Jan 7 15:26:34 CET 2022


Hi Rob,

On 1/6/22 9:19 PM, Rob Herring wrote:
> 'interrupt-parent' is never required as it can be in a parent node or a
> parent node itself can be an interrupt provider. Where exactly it lives is
> outside the scope of a binding schema.
> 
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
>  .../devicetree/bindings/gpio/toshiba,gpio-visconti.yaml  | 1 -
>  .../devicetree/bindings/mailbox/ti,omap-mailbox.yaml     | 9 ---------
>  Documentation/devicetree/bindings/mfd/cirrus,madera.yaml | 1 -
>  .../devicetree/bindings/net/lantiq,etop-xway.yaml        | 1 -
>  .../devicetree/bindings/net/lantiq,xrx200-net.yaml       | 1 -
>  .../devicetree/bindings/pci/sifive,fu740-pcie.yaml       | 1 -
>  .../devicetree/bindings/pci/xilinx-versal-cpm.yaml       | 1 -
>  7 files changed, 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
> index 9ad470e01953..b085450b527f 100644
> --- a/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
> +++ b/Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
> @@ -43,7 +43,6 @@ required:
>    - gpio-controller
>    - interrupt-controller
>    - "#interrupt-cells"
> -  - interrupt-parent
>  
>  additionalProperties: false
>  
> diff --git a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
> index e864d798168d..d433e496ec6e 100644
> --- a/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/ti,omap-mailbox.yaml
> @@ -175,15 +175,6 @@ required:
>    - ti,mbox-num-fifos
>  
>  allOf:
> -  - if:
> -      properties:
> -        compatible:
> -          enum:
> -            - ti,am654-mailbox
> -    then:
> -      required:
> -        - interrupt-parent
> -

There are multiple interrupt controllers on TI K3 devices, and we need this
property to be defined _specifically_ to point to the relevant interrupt router
parent node.

While what you state in general is true, I cannot have a node not define this on
K3 devices, and end up using the wrong interrupt parent (GIC
interrupt-controller). That's why the conditional compatible check.

regards
Suman

>    - if:
>        properties:
>          compatible:
> diff --git a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
> index 499c62c04daa..5dce62a7eff2 100644
> --- a/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
> +++ b/Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
> @@ -221,7 +221,6 @@ required:
>    - '#gpio-cells'
>    - interrupt-controller
>    - '#interrupt-cells'
> -  - interrupt-parent
>    - interrupts
>    - AVDD-supply
>    - DBVDD1-supply
> diff --git a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
> index 437502c5ca96..3ce9f9a16baf 100644
> --- a/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
> +++ b/Documentation/devicetree/bindings/net/lantiq,etop-xway.yaml
> @@ -46,7 +46,6 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - interrupt-parent
>    - interrupts
>    - interrupt-names
>    - lantiq,tx-burst-length
> diff --git a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
> index 7bc074a42369..5bc1a21ca579 100644
> --- a/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
> +++ b/Documentation/devicetree/bindings/net/lantiq,xrx200-net.yaml
> @@ -38,7 +38,6 @@ properties:
>  required:
>    - compatible
>    - reg
> -  - interrupt-parent
>    - interrupts
>    - interrupt-names
>    - "#address-cells"
> diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> index 2b9d1d6fc661..72c78f4ec269 100644
> --- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
> @@ -61,7 +61,6 @@ required:
>    - num-lanes
>    - interrupts
>    - interrupt-names
> -  - interrupt-parent
>    - interrupt-map-mask
>    - interrupt-map
>    - clock-names
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> index a2bbc0eb7220..32f4641085bc 100644
> --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
> @@ -55,7 +55,6 @@ required:
>    - reg-names
>    - "#interrupt-cells"
>    - interrupts
> -  - interrupt-parent
>    - interrupt-map
>    - interrupt-map-mask
>    - bus-range
> 



More information about the Alsa-devel mailing list