[PATCH v6 5/7] pinctrl: qcom: Extract chip specific LPASS LPI code

Srinivasa Rao Mandadapu (Temp) quic_srivasam at quicinc.com
Sat Feb 19 19:30:44 CET 2022


On 2/19/2022 8:12 AM, Stephen Boyd wrote:
Thanks for Your time Stephen!!!
> Quoting Srinivasa Rao Mandadapu (2022-02-14 07:19:52)
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index ca6f68a..8871451 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -357,4 +357,12 @@ config PINCTRL_LPASS_LPI
>>            Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>>            (Low Power Island) found on the Qualcomm Technologies Inc SoCs.
>>
>> +config PINCTRL_SM8250_LPASS_LPI
> Can this be sorted somehow? On Kconfig? Adding to the end of the file
> causes conflicts more often than adding alphabetically.
Okay. Will sort it and re post it.
>
>> +       tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
>> +       depends on PINCTRL_LPASS_LPI
>> +       help
>> +         This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> +         Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> +         (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
>> +
>>   endif
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index 709882f..c10d14d2 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -41,3 +41,4 @@ obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
>>   obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
>>   obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
>>   obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
>> +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> Can this be sorted somehow? Either on Kconfig or file name?
Okay.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> index 54750ba..8a82fd9 100644
>> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
>> @@ -4,91 +4,15 @@
>>    * Copyright (c) 2020 Linaro Ltd.
>>    */
>>
>> -#include <linux/bitops.h>
>> -#include <linux/bitfield.h>
>>   #include <linux/clk.h>
>>   #include <linux/gpio/driver.h>
>> -#include <linux/io.h>
>>   #include <linux/module.h>
>>   #include <linux/of_device.h>
>> -#include <linux/of.h>
>>   #include <linux/pinctrl/pinconf-generic.h>
>>   #include <linux/pinctrl/pinconf.h>
>>   #include <linux/pinctrl/pinmux.h>
>> -#include <linux/platform_device.h>
>> -#include <linux/slab.h>
>> -#include <linux/types.h>
>> -#include "../core.h"
>>   #include "../pinctrl-utils.h"
>> -
>> -#define LPI_SLEW_RATE_CTL_REG          0xa000
>> -#define LPI_TLMM_REG_OFFSET            0x1000
>> -#define LPI_SLEW_RATE_MAX              0x03
>> -#define LPI_SLEW_BITS_SIZE             0x02
>> -#define LPI_SLEW_RATE_MASK             GENMASK(1, 0)
>> -#define LPI_GPIO_CFG_REG               0x00
>> -#define LPI_GPIO_PULL_MASK             GENMASK(1, 0)
>> -#define LPI_GPIO_FUNCTION_MASK         GENMASK(5, 2)
>> -#define LPI_GPIO_OUT_STRENGTH_MASK     GENMASK(8, 6)
>> -#define LPI_GPIO_OE_MASK               BIT(9)
>> -#define LPI_GPIO_VALUE_REG             0x04
>> -#define LPI_GPIO_VALUE_IN_MASK         BIT(0)
>> -#define LPI_GPIO_VALUE_OUT_MASK                BIT(1)
>> -
>> -#define LPI_GPIO_BIAS_DISABLE          0x0
>> -#define LPI_GPIO_PULL_DOWN             0x1
>> -#define LPI_GPIO_KEEPER                        0x2
>> -#define LPI_GPIO_PULL_UP               0x3
>> -#define LPI_GPIO_DS_TO_VAL(v)          (v / 2 - 1)
>> -#define LPI_NO_SLEW                            -1
>> -
>> -#define LPI_FUNCTION(fname)                                    \
>> -       [LPI_MUX_##fname] = {                           \
>> -               .name = #fname,                         \
>> -               .groups = fname##_groups,               \
>> -               .ngroups = ARRAY_SIZE(fname##_groups),  \
>> -       }
>> -
>> -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4)         \
>> -       {                                               \
>> -               .group.name = "gpio" #id,                       \
>> -               .group.pins = gpio##id##_pins,          \
>> -               .pin = id,                              \
>> -               .slew_offset = soff,                    \
>> -               .group.num_pins = ARRAY_SIZE(gpio##id##_pins),  \
>> -               .funcs = (int[]){                       \
>> -                       LPI_MUX_gpio,                   \
>> -                       LPI_MUX_##f1,                   \
>> -                       LPI_MUX_##f2,                   \
>> -                       LPI_MUX_##f3,                   \
>> -                       LPI_MUX_##f4,                   \
>> -               },                                      \
>> -               .nfuncs = 5,                            \
>> -       }
>> -
>> -struct lpi_pingroup {
>> -       struct group_desc group;
>> -       unsigned int pin;
>> -       /* Bit offset in slew register for SoundWire pins only */
>> -       int slew_offset;
>> -       unsigned int *funcs;
>> -       unsigned int nfuncs;
>> -};
>> -
>> -struct lpi_function {
>> -       const char *name;
>> -       const char * const *groups;
>> -       unsigned int ngroups;
>> -};
>> -
>> -struct lpi_pinctrl_variant_data {
>> -       const struct pinctrl_pin_desc *pins;
>> -       int npins;
>> -       const struct lpi_pingroup *groups;
>> -       int ngroups;
>> -       const struct lpi_function *functions;
>> -       int nfunctions;
>> -};
>> +#include "pinctrl-lpass-lpi.h"
>>
>>   #define MAX_LPI_NUM_CLKS       2
>>
>> @@ -104,136 +28,6 @@ struct lpi_pinctrl {
>>          const struct lpi_pinctrl_variant_data *data;
>>   };
>>
>> -/* sm8250 variant specific data */
>> -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
>> -       PINCTRL_PIN(0, "gpio0"),
>> -       PINCTRL_PIN(1, "gpio1"),
>> -       PINCTRL_PIN(2, "gpio2"),
>> -       PINCTRL_PIN(3, "gpio3"),
>> -       PINCTRL_PIN(4, "gpio4"),
>> -       PINCTRL_PIN(5, "gpio5"),
>> -       PINCTRL_PIN(6, "gpio6"),
>> -       PINCTRL_PIN(7, "gpio7"),
>> -       PINCTRL_PIN(8, "gpio8"),
>> -       PINCTRL_PIN(9, "gpio9"),
>> -       PINCTRL_PIN(10, "gpio10"),
>> -       PINCTRL_PIN(11, "gpio11"),
>> -       PINCTRL_PIN(12, "gpio12"),
>> -       PINCTRL_PIN(13, "gpio13"),
>> -};
>> -
>> -enum sm8250_lpi_functions {
>> -       LPI_MUX_dmic1_clk,
>> -       LPI_MUX_dmic1_data,
>> -       LPI_MUX_dmic2_clk,
>> -       LPI_MUX_dmic2_data,
>> -       LPI_MUX_dmic3_clk,
>> -       LPI_MUX_dmic3_data,
>> -       LPI_MUX_i2s1_clk,
>> -       LPI_MUX_i2s1_data,
>> -       LPI_MUX_i2s1_ws,
>> -       LPI_MUX_i2s2_clk,
>> -       LPI_MUX_i2s2_data,
>> -       LPI_MUX_i2s2_ws,
>> -       LPI_MUX_qua_mi2s_data,
>> -       LPI_MUX_qua_mi2s_sclk,
>> -       LPI_MUX_qua_mi2s_ws,
>> -       LPI_MUX_swr_rx_clk,
>> -       LPI_MUX_swr_rx_data,
>> -       LPI_MUX_swr_tx_clk,
>> -       LPI_MUX_swr_tx_data,
>> -       LPI_MUX_wsa_swr_clk,
>> -       LPI_MUX_wsa_swr_data,
>> -       LPI_MUX_gpio,
>> -       LPI_MUX__,
>> -};
>> -
>> -static int gpio0_pins[] = { 0 };
>> -static int gpio1_pins[] = { 1 };
>> -static int gpio2_pins[] = { 2 };
>> -static int gpio3_pins[] = { 3 };
>> -static int gpio4_pins[] = { 4 };
>> -static int gpio5_pins[] = { 5 };
>> -static int gpio6_pins[] = { 6 };
>> -static int gpio7_pins[] = { 7 };
>> -static int gpio8_pins[] = { 8 };
>> -static int gpio9_pins[] = { 9 };
>> -static int gpio10_pins[] = { 10 };
>> -static int gpio11_pins[] = { 11 };
>> -static int gpio12_pins[] = { 12 };
>> -static int gpio13_pins[] = { 13 };
>> -static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>> -static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
>> -static const char * const dmic1_clk_groups[] = { "gpio6" };
>> -static const char * const dmic1_data_groups[] = { "gpio7" };
>> -static const char * const dmic2_clk_groups[] = { "gpio8" };
>> -static const char * const dmic2_data_groups[] = { "gpio9" };
>> -static const char * const i2s2_clk_groups[] = { "gpio10" };
>> -static const char * const i2s2_ws_groups[] = { "gpio11" };
>> -static const char * const dmic3_clk_groups[] = { "gpio12" };
>> -static const char * const dmic3_data_groups[] = { "gpio13" };
>> -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
>> -static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
>> -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
>> -static const char * const i2s1_clk_groups[] = { "gpio6" };
>> -static const char * const i2s1_ws_groups[] = { "gpio7" };
>> -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
>> -static const char * const wsa_swr_clk_groups[] = { "gpio10" };
>> -static const char * const wsa_swr_data_groups[] = { "gpio11" };
>> -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
>> -
>> -static const struct lpi_pingroup sm8250_groups[] = {
>> -       LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
>> -       LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
>> -       LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
>> -       LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>> -       LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>> -       LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
>> -       LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
>> -       LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
>> -       LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
>> -       LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
>> -       LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>> -       LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
>> -       LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
>> -       LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
>> -};
>> -
>> -static const struct lpi_function sm8250_functions[] = {
>> -       LPI_FUNCTION(dmic1_clk),
>> -       LPI_FUNCTION(dmic1_data),
>> -       LPI_FUNCTION(dmic2_clk),
>> -       LPI_FUNCTION(dmic2_data),
>> -       LPI_FUNCTION(dmic3_clk),
>> -       LPI_FUNCTION(dmic3_data),
>> -       LPI_FUNCTION(i2s1_clk),
>> -       LPI_FUNCTION(i2s1_data),
>> -       LPI_FUNCTION(i2s1_ws),
>> -       LPI_FUNCTION(i2s2_clk),
>> -       LPI_FUNCTION(i2s2_data),
>> -       LPI_FUNCTION(i2s2_ws),
>> -       LPI_FUNCTION(qua_mi2s_data),
>> -       LPI_FUNCTION(qua_mi2s_sclk),
>> -       LPI_FUNCTION(qua_mi2s_ws),
>> -       LPI_FUNCTION(swr_rx_clk),
>> -       LPI_FUNCTION(swr_rx_data),
>> -       LPI_FUNCTION(swr_tx_clk),
>> -       LPI_FUNCTION(swr_tx_data),
>> -       LPI_FUNCTION(wsa_swr_clk),
>> -       LPI_FUNCTION(wsa_swr_data),
>> -};
>> -
>> -static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
>> -       .pins = sm8250_lpi_pins,
>> -       .npins = ARRAY_SIZE(sm8250_lpi_pins),
>> -       .groups = sm8250_groups,
>> -       .ngroups = ARRAY_SIZE(sm8250_groups),
>> -       .functions = sm8250_functions,
>> -       .nfunctions = ARRAY_SIZE(sm8250_functions),
>> -};
>> -
>>   static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
>>                           unsigned int addr)
>>   {
>> @@ -580,7 +374,7 @@ static const struct gpio_chip lpi_gpio_template = {
>>          .dbg_show               = lpi_gpio_dbg_show,
>>   };
>>
>> -static int lpi_pinctrl_probe(struct platform_device *pdev)
>> +int lpi_pinctrl_probe(struct platform_device *pdev)
>>   {
>>          const struct lpi_pinctrl_variant_data *data;
>>          struct device *dev = &pdev->dev;
>> @@ -659,8 +453,9 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
>>
>>          return ret;
>>   }
>> +EXPORT_SYMBOL(lpi_pinctrl_probe);
> EXPORT_SYMBOL_GPL?
Okay. will change it.
>
>> -static int lpi_pinctrl_remove(struct platform_device *pdev)
>> +int lpi_pinctrl_remove(struct platform_device *pdev)
>>   {
>>          struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
>>
>> @@ -669,25 +464,7 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
>>
>>          return 0;
>>   }
>> +EXPORT_SYMBOL(lpi_pinctrl_remove);
> EXPORT_SYMBOL_GPL?
Okay. will change it.
>
>> -static const struct of_device_id lpi_pinctrl_of_match[] = {
>> -       {
>> -              .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
>> -              .data = &sm8250_lpi_data,
>> -       },
>> -       { }
>> -};
>> -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
>> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
>> new file mode 100644
>> index 0000000..a511d72
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
>> @@ -0,0 +1,86 @@
>> +/* SPDX-License-Identifier: GPL-2.0-only */
>> +/*
>> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2020 Linaro Ltd.
>> + */
>> +#ifndef __PINCTRL_LPASS_LPI_H__
>> +#define __PINCTRL_LPASS_LPI_H__
>> +
>> +#include <linux/bitops.h>
>> +#include <linux/bitfield.h>
>> +#include "../core.h"
>> +
>> +#define LPI_SLEW_RATE_CTL_REG  0xa000
>> +#define LPI_TLMM_REG_OFFSET            0x1000
>> +#define LPI_SLEW_RATE_MAX              0x03
>> +#define LPI_SLEW_BITS_SIZE             0x02
>> +#define LPI_SLEW_RATE_MASK             GENMASK(1, 0)
>> +#define LPI_GPIO_CFG_REG               0x00
>> +#define LPI_GPIO_PULL_MASK             GENMASK(1, 0)
>> +#define LPI_GPIO_FUNCTION_MASK         GENMASK(5, 2)
>> +#define LPI_GPIO_OUT_STRENGTH_MASK     GENMASK(8, 6)
>> +#define LPI_GPIO_OE_MASK               BIT(9)
>> +#define LPI_GPIO_VALUE_REG             0x04
>> +#define LPI_GPIO_VALUE_IN_MASK         BIT(0)
>> +#define LPI_GPIO_VALUE_OUT_MASK                BIT(1)
>> +
>> +#define LPI_GPIO_BIAS_DISABLE          0x0
>> +#define LPI_GPIO_PULL_DOWN             0x1
>> +#define LPI_GPIO_KEEPER                        0x2
>> +#define LPI_GPIO_PULL_UP               0x3
>> +#define LPI_GPIO_DS_TO_VAL(v)          (v / 2 - 1)
>> +#define LPI_NO_SLEW                            -1
>> +
>> +#define LPI_FUNCTION(fname)                                    \
>> +       [LPI_MUX_##fname] = {                           \
>> +               .name = #fname,                         \
>> +               .groups = fname##_groups,               \
>> +               .ngroups = ARRAY_SIZE(fname##_groups),  \
>> +       }
>> +
>> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4)         \
>> +       {                                               \
>> +               .group.name = "gpio" #id,                       \
>> +               .group.pins = gpio##id##_pins,          \
>> +               .pin = id,                              \
>> +               .slew_offset = soff,                    \
>> +               .group.num_pins = ARRAY_SIZE(gpio##id##_pins),  \
>> +               .funcs = (int[]){                       \
>> +                       LPI_MUX_gpio,                   \
>> +                       LPI_MUX_##f1,                   \
>> +                       LPI_MUX_##f2,                   \
>> +                       LPI_MUX_##f3,                   \
>> +                       LPI_MUX_##f4,                   \
>> +               },                                      \
>> +               .nfuncs = 5,                            \
>> +       }
>> +
>> +struct lpi_pingroup {
>> +       struct group_desc group;
>> +       unsigned int pin;
>> +       /* Bit offset in slew register for SoundWire pins only */
>> +       int slew_offset;
>> +       unsigned int *funcs;
>> +       unsigned int nfuncs;
>> +};
>> +
>> +struct lpi_function {
>> +       const char *name;
>> +       const char * const *groups;
>> +       unsigned int ngroups;
>> +};
>> +
>> +struct lpi_pinctrl_variant_data {
>> +       const struct pinctrl_pin_desc *pins;
>> +       int npins;
>> +       const struct lpi_pingroup *groups;
>> +       int ngroups;
>> +       const struct lpi_function *functions;
>> +       int nfunctions;
>> +};
>> +
>> +int lpi_pinctrl_probe(struct platform_device *pdev);
>> +int lpi_pinctrl_remove(struct platform_device *pdev);
>> +
>> +#endif /*__PINCTRL_LPASS_LPI_H__*/
>> +
> Drop the extra newline on this file please.
Okay. will remove it.
>
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>> new file mode 100644
>> index 0000000..27e358e
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>> @@ -0,0 +1,166 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2020 Linaro Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
> Drop unused include please.
Okay.
>
>> +#include <linux/gpio/driver.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-lpass-lpi.h"
>> +
>> +enum lpass_lpi_functions {
>> +       LPI_MUX_dmic1_clk,
>> +       LPI_MUX_dmic1_data,
>> +       LPI_MUX_dmic2_clk,
>> +       LPI_MUX_dmic2_data,
>> +       LPI_MUX_dmic3_clk,
>> +       LPI_MUX_dmic3_data,
>> +       LPI_MUX_i2s1_clk,
>> +       LPI_MUX_i2s1_data,
>> +       LPI_MUX_i2s1_ws,
>> +       LPI_MUX_i2s2_clk,
>> +       LPI_MUX_i2s2_data,
>> +       LPI_MUX_i2s2_ws,
>> +       LPI_MUX_qua_mi2s_data,
>> +       LPI_MUX_qua_mi2s_sclk,
>> +       LPI_MUX_qua_mi2s_ws,
>> +       LPI_MUX_swr_rx_clk,
>> +       LPI_MUX_swr_rx_data,
>> +       LPI_MUX_swr_tx_clk,
>> +       LPI_MUX_swr_tx_data,
>> +       LPI_MUX_wsa_swr_clk,
>> +       LPI_MUX_wsa_swr_data,
>> +       LPI_MUX_gpio,
>> +       LPI_MUX__,
>> +};
>> +
>> +static int gpio0_pins[] = { 0 };
> Why not const?
It's creating conflict with group_desc structure params.
>
>> +static int gpio1_pins[] = { 1 };
>> +static int gpio2_pins[] = { 2 };
>> +static int gpio3_pins[] = { 3 };
>> +static int gpio4_pins[] = { 4 };
>> +static int gpio5_pins[] = { 5 };
>> +static int gpio6_pins[] = { 6 };
>> +static int gpio7_pins[] = { 7 };
>> +static int gpio8_pins[] = { 8 };
>> +static int gpio9_pins[] = { 9 };
>> +static int gpio10_pins[] = { 10 };
>> +static int gpio11_pins[] = { 11 };
>> +static int gpio12_pins[] = { 12 };
>> +static int gpio13_pins[] = { 13 };
>> +
>> +
>> +/* sm8250 variant specific data */
>> +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
>> +       PINCTRL_PIN(0, "gpio0"),
>> +       PINCTRL_PIN(1, "gpio1"),
>> +       PINCTRL_PIN(2, "gpio2"),
>> +       PINCTRL_PIN(3, "gpio3"),
>> +       PINCTRL_PIN(4, "gpio4"),
>> +       PINCTRL_PIN(5, "gpio5"),
>> +       PINCTRL_PIN(6, "gpio6"),
>> +       PINCTRL_PIN(7, "gpio7"),
>> +       PINCTRL_PIN(8, "gpio8"),
>> +       PINCTRL_PIN(9, "gpio9"),
>> +       PINCTRL_PIN(10, "gpio10"),
>> +       PINCTRL_PIN(11, "gpio11"),
>> +       PINCTRL_PIN(12, "gpio12"),
>> +       PINCTRL_PIN(13, "gpio13"),
>> +};
>> +
>> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
>> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
>> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
>> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
>> +static const char * const dmic1_clk_groups[] = { "gpio6" };
>> +static const char * const dmic1_data_groups[] = { "gpio7" };
>> +static const char * const dmic2_clk_groups[] = { "gpio8" };
>> +static const char * const dmic2_data_groups[] = { "gpio9" };
>> +static const char * const i2s2_clk_groups[] = { "gpio10" };
>> +static const char * const i2s2_ws_groups[] = { "gpio11" };
>> +static const char * const dmic3_clk_groups[] = { "gpio12" };
>> +static const char * const dmic3_data_groups[] = { "gpio13" };
>> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
>> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
>> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
>> +static const char * const i2s1_clk_groups[] = { "gpio6" };
>> +static const char * const i2s1_ws_groups[] = { "gpio7" };
>> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
>> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
>> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
>> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
>> +
>> +static const struct lpi_pingroup sm8250_groups[] = {
>> +       LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
>> +       LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
>> +       LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
>> +       LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>> +       LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>> +       LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
>> +       LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
>> +       LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
>> +       LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
>> +       LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
>> +       LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>> +       LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
>> +       LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
>> +       LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
>> +};
>> +
>> +static const struct lpi_function sm8250_functions[] = {
>> +       LPI_FUNCTION(dmic1_clk),
>> +       LPI_FUNCTION(dmic1_data),
>> +       LPI_FUNCTION(dmic2_clk),
>> +       LPI_FUNCTION(dmic2_data),
>> +       LPI_FUNCTION(dmic3_clk),
>> +       LPI_FUNCTION(dmic3_data),
>> +       LPI_FUNCTION(i2s1_clk),
>> +       LPI_FUNCTION(i2s1_data),
>> +       LPI_FUNCTION(i2s1_ws),
>> +       LPI_FUNCTION(i2s2_clk),
>> +       LPI_FUNCTION(i2s2_data),
>> +       LPI_FUNCTION(i2s2_ws),
>> +       LPI_FUNCTION(qua_mi2s_data),
>> +       LPI_FUNCTION(qua_mi2s_sclk),
>> +       LPI_FUNCTION(qua_mi2s_ws),
>> +       LPI_FUNCTION(swr_rx_clk),
>> +       LPI_FUNCTION(swr_rx_data),
>> +       LPI_FUNCTION(swr_tx_clk),
>> +       LPI_FUNCTION(swr_tx_data),
>> +       LPI_FUNCTION(wsa_swr_clk),
>> +       LPI_FUNCTION(wsa_swr_data),
>> +};
>> +
>> +static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
> It would be great if this could be const.
Okay. Will add.
>> +       .pins = sm8250_lpi_pins,
>> +       .npins = ARRAY_SIZE(sm8250_lpi_pins),
>> +       .groups = sm8250_groups,
>> +       .ngroups = ARRAY_SIZE(sm8250_groups),
>> +       .functions = sm8250_functions,
>> +       .nfunctions = ARRAY_SIZE(sm8250_functions),
>> +};
>> +


More information about the Alsa-devel mailing list