[PATCH v2 1/3] slimbus: qcom-ngd: use correct error in message of pdr_add_lookup() failure

[Krzysztof Kozlowski]

Use correct error code, instead of previous 'ret' value, when printing
error from pdr_add_lookup() failure.

Cc: <stable at vger.kernel.org>
Fixes: e1ae85e1830e ("slimbus: qcom-ngd-ctrl: add Protection Domain Restart Support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Changes since v1:
1. Correct typo
2. Return 'ret' instead of again PTR_ERR
---
 drivers/slimbus/qcom-ngd-ctrl.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index 0aa8408464ad..f4f330b9fa72 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1581,8 +1581,9 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 
 	pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
 	if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
+		ret = PTR_ERR(pds);
 		dev_err(dev, "pdr add lookup failed: %d\n", ret);
-		return PTR_ERR(pds);
+		return ret;
 	}
 
 	platform_driver_register(&qcom_slim_ngd_driver);
-- 
2.34.1