[PATCH] Add quirk to enable Avid Mbox 3 support
Manu
mbarriolinares at gmail.com
Wed Aug 17 18:48:34 CEST 2022
Could you perhaps make this the defaults, for it to work in stereo?
I've made the Analog 1 to be left, and Analog 2 to be right channels,
and muted Analog 3 and 4, as they are detected as "surround".
This works out of the box with the back Analog outs.
(Still haven't tested front headphones out)
> /* Set software sends to output */
> com_buff[0] = 0x00;
> com_buff[1] = 0x00;
> /* Analogue software return 1 left channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0100, 0x4001, &com_buff, 2);
> /* Analogue software return 2 right channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0105, 0x4001, &com_buff, 2);
> com_buff[0] = 0x00;
> com_buff[1] = 0x80;
> /* Analogue software return 1 right channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0101, 0x4001, &com_buff, 2);
> /* Analogue software return 2 left channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0104, 0x4001, &com_buff, 2);
> com_buff[0] = 0x00;
> com_buff[1] = 0x80;
> /* Analogue software return 3 left channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0108, 0x4001, &com_buff, 2);
> /* Analogue software return 3 right channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x0109, 0x4001, &com_buff, 2);
> /* Analogue software return 4 left channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x010c, 0x4001, &com_buff, 2);
> /* Analogue software return 4 right channel: */
> snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 1, 0x21, 0x010d, 0x4001, &com_buff, 2);
On Wed, Aug 17, 2022 at 1:28 PM <connerknoxpublic at gmail.com> wrote:
>
> From: Conner Knox <connerknoxpublic at gmail.com>
>
> Add support for Avid Mbox3 USB audio interface at 48kHz
>
> Signed-off-by: Conner Knox <connerknoxpublic at gmail.com>
> ---
> sound/usb/quirks-table.h | 76 ++++++++++
> sound/usb/quirks.c | 311 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 387 insertions(+)
>
> diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
> index 0ea39565e623..5f43863e5a5f 100644
> --- a/sound/usb/quirks-table.h
> +++ b/sound/usb/quirks-table.h
> @@ -2978,6 +2978,82 @@ YAMAHA_DEVICE(0x7010, "UB99"),
> }
> }
> },
> +/* DIGIDESIGN MBOX 3 */
> +{
> + USB_DEVICE(0x0dba, 0x5000),
> + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
> + .vendor_name = "Digidesign",
> + .product_name = "Mbox 3",
> + .ifnum = QUIRK_ANY_INTERFACE,
> + .type = QUIRK_COMPOSITE,
> + .data = (const struct snd_usb_audio_quirk[]) {
> + {
> + .ifnum = 0,
> + .type = QUIRK_IGNORE_INTERFACE
> + },
> + {
> + .ifnum = 1,
> + .type = QUIRK_IGNORE_INTERFACE
> + },
> + {
> + .ifnum = 2,
> + .type = QUIRK_AUDIO_FIXED_ENDPOINT,
> + .data = &(const struct audioformat) {
> + .formats = SNDRV_PCM_FMTBIT_S24_3LE,
> + .channels = 4,
> + .iface = 2,
> + .altsetting = 1,
> + .altset_idx = 1,
> + .attributes = 0x00,
> + .endpoint = 0x01,
> + .ep_attr = USB_ENDPOINT_XFER_ISOC |
> + USB_ENDPOINT_SYNC_ASYNC,
> + .rates = SNDRV_PCM_RATE_48000,
> + .rate_min = 48000,
> + .rate_max = 48000,
> + .nr_rates = 1,
> + .rate_table = (unsigned int[]) {
> + 48000
> + }
> + }
> + },
> + {
> + .ifnum = 3,
> + .type = QUIRK_AUDIO_FIXED_ENDPOINT,
> + .data = &(const struct audioformat) {
> + .formats = SNDRV_PCM_FMTBIT_S24_3LE,
> + .channels = 4,
> + .iface = 3,
> + .altsetting = 1,
> + .altset_idx = 1,
> + .endpoint = 0x81,
> + .attributes = 0x00,
> + .ep_attr = USB_ENDPOINT_XFER_ISOC |
> + USB_ENDPOINT_SYNC_ASYNC,
> + .maxpacksize = 0x009c,
> + .rates = SNDRV_PCM_RATE_48000,
> + .rate_min = 48000,
> + .rate_max = 48000,
> + .nr_rates = 1,
> + .rate_table = (unsigned int[]) {
> + 48000
> + }
> + }
> + },
> + {
> + .ifnum = 4,
> + .type = QUIRK_MIDI_FIXED_ENDPOINT,
> + .data = & (const struct snd_usb_midi_endpoint_info) {
> + .out_cables = 0x0001,
> + .in_cables = 0x0001
> + }
> + },
> + {
> + .ifnum = -1
> + }
> + }
> + }
> +},
> {
> /* Tascam US122 MKII - playback-only support */
> USB_DEVICE_VENDOR_SPEC(0x0644, 0x8021),
> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
> index ab9f3da49941..e7caa7eeb955 100644
> --- a/sound/usb/quirks.c
> +++ b/sound/usb/quirks.c
> @@ -1020,6 +1020,313 @@ static int snd_usb_axefx3_boot_quirk(struct usb_device *dev)
> return 0;
> }
>
> +static void mbox3_setup_48_24_magic(struct usb_device *dev)
> +{
> + u8 com_buff[4];
> +
> + /* Load 48000Hz rate into buffer */
> + com_buff[0] = 0x80;
> + com_buff[1] = 0xbb;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> +
> + /* Set 48000Hz sample rate */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 0x01, 0x21, 0x0100, 0x0001, &com_buff, 0x0004);
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 0x01, 0x21, 0x0100, 0x8101, &com_buff, 0x0004);
> +
> + /* Set clock source to Internal (as opposed to S/PDIF) */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x01;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0100, 0x8001, &com_buff, 1);
> +
> + /* Mute the hardware loopbacks to start the device in a known state.
> + * The Mbox 3 is little endian and
> + * the data written here seems a bit odd.
> + * 0x8000 (shown in big endian form) is muted
> + * and volume increases to 0xffff it seems.
> + * I've yet to observe 0xffff being sent.
> + * Instead, full volume seems to be 0x0000.
> + * Per my understanding of 16 bit integers, this is seems strange, but maybe I'm missing something
> + */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x80;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + /* Analogue input 1 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0110, 0x4001, &com_buff, 2);
> + /* Analogue input 1 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0111, 0x4001, &com_buff, 2);
> + /* Analogue input 2 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0114, 0x4001, &com_buff, 2);
> + /* Analogue input 2 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0115, 0x4001, &com_buff, 2);
> + /* Analogue input 3 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0118, 0x4001, &com_buff, 2);
> + /* Analogue input 3 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0119, 0x4001, &com_buff, 2);
> + /* Analogue input 4 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011c, 0x4001, &com_buff, 2);
> + /* Analogue input 4 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011d, 0x4001, &com_buff, 2);
> +
> + /* Set software sends to output */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + /* Analogue software return 1 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0100, 0x4001, &com_buff, 2);
> + /* Analogue software return 1 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0101, 0x4001, &com_buff, 2);
> + /* Analogue software return 2 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0104, 0x4001, &com_buff, 2);
> + /* Analogue software return 2 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0105, 0x4001, &com_buff, 2);
> + /* Analogue software return 3 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0108, 0x4001, &com_buff, 2);
> + /* Analogue software return 3 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0109, 0x4001, &com_buff, 2);
> + /* Analogue software return 4 left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010c, 0x4001, &com_buff, 2);
> + /* Analogue software return 4 right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010d, 0x4001, &com_buff, 2);
> +
> + /* Return to muting sends */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x80;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + /* Analogue fx return left channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0120, 0x4001, &com_buff, 2);
> + /* Analogue fx return right channel: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0121, 0x4001, &com_buff, 2);
> +
> + /* Analogue software input 1 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0100, 0x4201, &com_buff, 2);
> + /* Analogue software input 2 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0101, 0x4201, &com_buff, 2);
> + /* Analogue software input 3 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0102, 0x4201, &com_buff, 2);
> + /* Analogue software input 4 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0103, 0x4201, &com_buff, 2);
> + /* Analogue input 1 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0104, 0x4201, &com_buff, 2);
> + /* Analogue input 2 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0105, 0x4201, &com_buff, 2);
> + /* Analogue input 3 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0106, 0x4201, &com_buff, 2);
> + /* Analogue input 4 fx send: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0107, 0x4201, &com_buff, 2);
> +
> + /* Toggle allowing host control */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x02;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 3, 0x21, 0x0000, 0x2001, &com_buff, 1);
> +
> + /* Do not dim fx returns */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0002, 0x2001, &com_buff, 1);
> +
> + /* Do not set fx returns to mono */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), 3, 0x21, 0x0001, 0x2001, &com_buff, 1);
> +
> + /* Mute the S/PDIF hardware loopback
> + * same odd volume logic here as above
> + */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x80;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + /* S/PDIF hardware input 1 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0112, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 1 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0113, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 2 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0116, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 2 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0117, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 3 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011a, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 3 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011b, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 4 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011e, 0x4001, &com_buff, 2);
> + /* S/PDIF hardware input 4 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x011f, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 1 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0102, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 1 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0103, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 2 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0106, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 2 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0107, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 3 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010a, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 3 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010b, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 4 left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010e, 0x4001, &com_buff, 2);
> + /* S/PDIF software return 4 right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x010f, 0x4001, &com_buff, 2);
> + /* S/PDIF fx returns left channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0122, 0x4001, &com_buff, 2);
> + /* S/PDIF fx returns right channel */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0123, 0x4001, &com_buff, 2);
> +
> + /* Set the dropdown "Effect" to the first option */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0200, 0x4301, &com_buff, 1);
> +
> + /* Set the effect duration to 0 */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0400, 0x4301, &com_buff, 2);
> +
> + /* Set the effect volume and feedback to 0 */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + /* feedback: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0500, 0x4301, &com_buff, 1);
> + /* volume: */
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 1, 0x21, 0x0300, 0x4301, &com_buff, 1);
> +
> + /* Set soft button hold duration */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x05;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 3, 0x21, 0x0005, 0x2001, &com_buff, 1);
> +
> + /* Use dim LEDs for button of state */
> + memset(com_buff, 0x00, 4);
> + com_buff[0] = 0x00;
> + com_buff[1] = 0x00;
> + com_buff[2] = 0x00;
> + com_buff[3] = 0x00;
> + snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0),
> + 3, 0x21, 0x0004, 0x2001, &com_buff, 1);
> +
> + return;
> +}
> +
> +#define MBOX3_DESCRIPTOR_SIZE 464
> +
> +static int snd_usb_mbox3_boot_quirk(struct usb_device *dev)
> +{
> + struct usb_host_config *config = dev->actconfig;
> + int err;
> + int descriptor_size;
> +
> + descriptor_size = le16_to_cpu(get_cfg_desc(config)->wTotalLength);
> +
> + if (descriptor_size != MBOX3_DESCRIPTOR_SIZE) {
> + dev_err(&dev->dev, "Invalid descriptor size=%d.\n", descriptor_size);
> + return -ENODEV;
> + }
> +
> + dev_dbg(&dev->dev, "device initialised!\n");
> +
> + err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
> + &dev->descriptor, sizeof(dev->descriptor));
> + config = dev->actconfig;
> + if (err < 0)
> + dev_dbg(&dev->dev, "error usb_get_descriptor: %d\n", err);
> +
> + err = usb_reset_configuration(dev);
> + if (err < 0)
> + dev_dbg(&dev->dev, "error usb_reset_configuration: %d\n", err);
> + dev_dbg(&dev->dev, "mbox3_boot: new boot length = %d\n",
> + le16_to_cpu(get_cfg_desc(config)->wTotalLength));
> +
> + mbox3_setup_48_24_magic(dev);
> + dev_info(&dev->dev, "Digidesign Mbox 3: 24bit 48kHz");
> +
> + return 0; /* Successful boot */
> +}
>
> #define MICROBOOK_BUF_SIZE 128
>
> @@ -1324,6 +1631,10 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev,
> case USB_ID(0x0dba, 0x3000):
> /* Digidesign Mbox 2 */
> return snd_usb_mbox2_boot_quirk(dev);
> + case USB_ID(0x0dba, 0x5000):
> + /* Digidesign Mbox 3 */
> + return snd_usb_mbox3_boot_quirk(dev);
> +
>
> case USB_ID(0x1235, 0x0010): /* Focusrite Novation Saffire 6 USB */
> case USB_ID(0x1235, 0x0018): /* Focusrite Novation Twitch */
> --
> 2.37.2
>
More information about the Alsa-devel
mailing list