[PATCH] ASoC: wm8524: remove rate constraint for FE-BE case

[Shengjiu Wang]

The constraint is propagate to Front End Bitstream
for Front End and Back End share same snd_soc_pcm_runtime.

The constraint is not needed for Back End Bitstream
when there is be_hw_params_fixup() defined.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
Tested-by: Fabio Estevam <festevam at denx.de>
---
 sound/soc/codecs/wm8524.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm8524.c b/sound/soc/codecs/wm8524.c
index 81f858f6bd67..442a59857875 100644
--- a/sound/soc/codecs/wm8524.c
+++ b/sound/soc/codecs/wm8524.c
@@ -61,6 +61,7 @@ static int wm8524_startup(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct wm8524_priv *wm8524 = snd_soc_component_get_drvdata(component);
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 
 	/* The set of sample rates that can be supported depends on the
 	 * MCLK supplied to the CODEC - enforce this.
@@ -71,9 +72,10 @@ static int wm8524_startup(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	snd_pcm_hw_constraint_list(substream->runtime, 0,
-				   SNDRV_PCM_HW_PARAM_RATE,
-				   &wm8524->rate_constraint);
+	if (!rtd->dai_link->be_hw_params_fixup)
+		snd_pcm_hw_constraint_list(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_RATE,
+					   &wm8524->rate_constraint);
 
 	gpiod_set_value_cansleep(wm8524->mute, 1);
 
-- 
2.17.1