[PATCH v2] ASoC: Intel: boards: add max98390 2/4 speakers support
Chiang, Mac
mac.chiang at intel.com
Tue Sep 14 18:46:01 CEST 2021
> I don't quite follow the initialization part. In the 4-ch case, you will setup
> control and widgets but...
>
> > +int max_98390_spk_codec_init(struct snd_soc_pcm_runtime *rtd) {
> > + struct snd_soc_card *card = rtd->card;
> > + int ret;
> > +
> > + ret = snd_soc_dapm_new_controls(&card->dapm,
> max_98390_tt_dapm_widgets,
> > +
> ARRAY_SIZE(max_98390_tt_dapm_widgets));
> > + if (ret) {
> > + dev_err(rtd->dev, "unable to add dapm controls, ret %d\n",
> ret);
> > + /* Don't need to add routes if widget addition failed */
> > + return ret;
> > + }
> > +
> > + ret = snd_soc_add_card_controls(card, max_98390_tt_kcontrols,
> > +
> ARRAY_SIZE(max_98390_tt_kcontrols));
> > + if (ret) {
> > + dev_err(rtd->dev, "unable to add card controls, ret %d\n",
> ret);
> > + return ret;
> > + }
> > +
> > + ret = snd_soc_dapm_add_routes(&card->dapm,
> max_98373_dapm_routes,
> > +
> ARRAY_SIZE(max_98373_dapm_routes));
> > + if (ret) {
> > + dev_err(rtd->dev, "Speaker Left, Right map addition failed:
> %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = snd_soc_dapm_add_routes(&card->dapm,
> max_98390_tt_dapm_routes,
> > +
> ARRAY_SIZE(max_98390_tt_dapm_routes));
> > + if (ret)
> > + dev_err(rtd->dev, "Tweeter Speaker Left, Right map addition
> failed:
> > +%d\n", ret);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_NS(max_98390_spk_codec_init,
> > +SND_SOC_INTEL_SOF_MAXIM_COMMON);
>
> > @@ -745,6 +778,21 @@ static struct snd_soc_dai_link
> *sof_card_dai_links_create(struct device *dev,
> > } else if (sof_rt5682_quirk &
> > SOF_RT1011_SPEAKER_AMP_PRESENT) {
> > sof_rt1011_dai_link(&links[id]);
> > + } else if (sof_rt5682_quirk &
> > + SOF_MAX98390_SPEAKER_AMP_PRESENT) {
> > + if (sof_rt5682_quirk &
> > +
> SOF_MAX98390_TWEETER_SPEAKER_PRESENT) {
> > + links[id].codecs =
> max_98390_4spk_components;
> > + links[id].num_codecs =
> ARRAY_SIZE(max_98390_4spk_components);
> > + links[id].init = max_98390_spk_codec_init;
> > + } else {
> > + links[id].codecs = max_98390_components;
> > + links[id].num_codecs =
> ARRAY_SIZE(max_98390_components);
> > + links[id].init = max_98373_spk_codec_init;
> > + }
>
> ... in the 2 ch case you use this function
>
> int max_98373_spk_codec_init(struct snd_soc_pcm_runtime *rtd) {
> struct snd_soc_card *card = rtd->card;
> int ret;
>
> ret = snd_soc_dapm_add_routes(&card->dapm,
> max_98373_dapm_routes,
> ARRAY_SIZE(max_98373_dapm_routes));
> if (ret)
> dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
> return ret;
> }
>
> which only adds routes. Isn't there a need for widgets/controls for the
> 2 channel case as well?
2 channels controls/widgets already exist in sof_controls[] and sof_widgets[] from sof_rt5682.c
>
> It's also not good practice to mix the initialization of max98090 with a
> function with an explicit 98373 prefix. it's hard to maintain and error-prone.
> You might as well duplicate the function, if it's not used it will be removed
> while linking.
I am not sure whether I understand your suggestions.
When both using links[id].init = max_98390_spk_codec_init;
I can only think out add 2 spk dapm initially then check if 4 codec existing by using acpi_dev_present with uid.
If no good, any example I can refer to?
int max_98390_spk_codec_init(struct snd_soc_pcm_runtime *rtd, int num_amps)
{
struct snd_soc_card *card = rtd->card;
int ret;
ret = snd_soc_dapm_add_routes(&card->dapm, max_98390_dapm_routes,
ARRAY_SIZE(max_98390_dapm_routes));
if (ret)
dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
if (acpi_dev_present("MX98390", "3", -1)) {
ret = snd_soc_dapm_new_controls(&card->dapm, max_98390_tt_dapm_widgets,
ARRAY_SIZE(max_98390_tt_dapm_widgets));
if (ret) {
dev_err(rtd->dev, "unable to add dapm controls, ret %d\n", ret);
/* Don't need to add routes if widget addition failed */
return ret;
}
ret = snd_soc_add_card_controls(card, max_98390_tt_kcontrols,
ARRAY_SIZE(max_98390_tt_kcontrols));
if (ret) {
dev_err(rtd->dev, "unable to add card controls, ret %d\n", ret);
return ret;
}
ret = snd_soc_dapm_add_routes(&card->dapm, max_98390_tt_dapm_routes,
ARRAY_SIZE(max_98390_tt_dapm_routes));
if (ret)
dev_err(rtd->dev, "Tweeter Speaker Left, Right map addition failed: %d\n", ret);
}
return ret;
}
> > + links[id].ops = &max_98390_ops;
> > + links[id].dpcm_capture = 1;
> > +
> > } else {
> > max_98357a_dai_link(&links[id]);
> > }
> > @@ -881,6 +929,14 @@ static int sof_audio_probe(struct platform_device
> *pdev)
> > sof_rt1011_codec_conf(&sof_audio_card_rt5682);
> > else if (sof_rt5682_quirk & SOF_RT1015P_SPEAKER_AMP_PRESENT)
> > sof_rt1015p_codec_conf(&sof_audio_card_rt5682);
> > + else if (sof_rt5682_quirk & SOF_MAX98390_SPEAKER_AMP_PRESENT)
> {
> > + if (sof_rt5682_quirk &
> SOF_MAX98390_TWEETER_SPEAKER_PRESENT)
> > +
> max_98390_set_codec_conf(&sof_audio_card_rt5682,
> > +
> ARRAY_SIZE(max_98390_4spk_components));
> > + else
> > +
> max_98390_set_codec_conf(&sof_audio_card_rt5682,
> > +
> ARRAY_SIZE(max_98390_components));
> > + }
> >
> > if (sof_rt5682_quirk & SOF_SSP_BT_OFFLOAD_PRESENT)
> > sof_audio_card_rt5682.num_links++;
> > @@ -1007,6 +1063,18 @@ static const struct platform_device_id
> board_ids[] = {
> > SOF_RT5682_SSP_AMP(2) |
> > SOF_RT5682_NUM_HDMIDEV(4)),
> > },
> > + {
> > + .name = "adl_max98390_rt5682",
> > + .driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
> > + SOF_RT5682_SSP_CODEC(0) |
> > + SOF_SPEAKER_AMP_PRESENT |
> > +
> SOF_MAX98390_SPEAKER_AMP_PRESENT |
> > + SOF_RT5682_SSP_AMP(1) |
> > + SOF_RT5682_NUM_HDMIDEV(4) |
> > + SOF_BT_OFFLOAD_SSP(2) |
> > + SOF_SSP_BT_OFFLOAD_PRESENT),
> > + },
> > +
> > { }
> > };
> > MODULE_DEVICE_TABLE(platform, board_ids); @@ -1026,6 +1094,7 @@
> > MODULE_DESCRIPTION("SOF Audio Machine driver");
> MODULE_AUTHOR("Bard
> > Liao <bard.liao at intel.com>"); MODULE_AUTHOR("Sathya Prakash M R
> > <sathya.prakash.m.r at intel.com>"); MODULE_AUTHOR("Brent Lu
> > <brent.lu at intel.com>");
> > +MODULE_AUTHOR("Mac Chiang <mac.chiang at intel.com>");
> > MODULE_LICENSE("GPL v2");
> > MODULE_IMPORT_NS(SND_SOC_INTEL_HDA_DSP_COMMON);
> > MODULE_IMPORT_NS(SND_SOC_INTEL_SOF_MAXIM_COMMON);
> > diff --git a/sound/soc/intel/common/soc-acpi-intel-adl-match.c
> > b/sound/soc/intel/common/soc-acpi-intel-adl-match.c
> > index a0f6a69c7038..2db152998e4a 100644
> > --- a/sound/soc/intel/common/soc-acpi-intel-adl-match.c
> > +++ b/sound/soc/intel/common/soc-acpi-intel-adl-match.c
> > @@ -280,6 +280,11 @@ static const struct snd_soc_acpi_codecs
> adl_max98357a_amp = {
> > .codecs = {"MX98357A"}
> > };
> >
> > +static const struct snd_soc_acpi_codecs adl_max98390_amp = {
> > + .num_codecs = 1,
> > + .codecs = {"MX98390"}
> > +};
> > +
> > struct snd_soc_acpi_mach snd_soc_acpi_intel_adl_machines[] = {
> > {
> > .id = "10EC5682",
> > @@ -297,6 +302,14 @@ struct snd_soc_acpi_mach
> snd_soc_acpi_intel_adl_machines[] = {
> > .sof_fw_filename = "sof-adl.ri",
> > .sof_tplg_filename = "sof-adl-max98357a-rt5682.tplg",
> > },
> > + {
> > + .id = "10EC5682",
> > + .drv_name = "adl_max98390_rt5682",
> > + .machine_quirk = snd_soc_acpi_codec_list,
> > + .quirk_data = &adl_max98390_amp,
> > + .sof_fw_filename = "sof-adl.ri",
> > + .sof_tplg_filename = "sof-adl-max98390-rt5682.tplg",
> > + },
> > {},
> > };
> > EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_adl_machines);
> > diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
> > index bc9e70765678..be90a5f79766 100644
> > --- a/sound/soc/sof/sof-pci-dev.c
> > +++ b/sound/soc/sof/sof-pci-dev.c
> > @@ -59,6 +59,15 @@ static const struct dmi_system_id sof_tplg_table[] =
> {
> > },
> > .driver_data = "sof-adl-rt5682-ssp0-max98373-ssp2.tplg",
> > },
> > + {
> > + .callback = sof_tplg_cb,
> > + .matches = {
> > + DMI_MATCH(DMI_PRODUCT_FAMILY,
> "Google_Brya"),
> > + DMI_MATCH(DMI_OEM_STRING, "AUDIO-
> MAX98390_ALC5682I_I2S"),
> > + },
> > + .driver_data = "sof-adl-max98390-ssp2-rt5682-ssp0.tplg",
> > + },
> > +
>
> I am still relatively confused since you still have two alternatives for topology
> but you described three configurations.
3rd hw board without quirk, so it is applying SSP1 2 speakers which declare in board_id[].
{
.name = "adl_max98390_rt5682",
.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
SOF_RT5682_SSP_CODEC(0) |
SOF_SPEAKER_AMP_PRESENT |
SOF_MAX98390_SPEAKER_AMP_PRESENT |
SOF_RT5682_SSP_AMP(1) |
SOF_RT5682_NUM_HDMIDEV(4) |
SOF_BT_OFFLOAD_SSP(2) |
SOF_SSP_BT_OFFLOAD_PRESENT),
},
More information about the Alsa-devel
mailing list