[PATCH v1 17/20] ARM: tegra: Add S/PDIF node to Tegra20 device-tree

[Dmitry Osipenko]

25.11.2021 01:00, Dmitry Osipenko пишет:
> Add S/PDIF node to Tegra20 device-tree. It's needed for enabling HDMI
> audio support.
> 
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  arch/arm/boot/dts/tegra20.dtsi | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 63c2c2f8c0ce..799da7dc929b 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -197,6 +197,7 @@ hdmi at 54280000 {
>  			reset-names = "hdmi";
>  			power-domains = <&pd_core>;
>  			operating-points-v2 = <&hdmi_dvfs_opp_table>;
> +			#sound-dai-cells = <0>;
>  			status = "disabled";
>  		};
>  
> @@ -396,6 +397,23 @@ tegra_ac97: ac97 at 70002000 {
>  		status = "disabled";
>  	};
>  
> +	tegra_spdif: spdif at 70002400 {
> +		compatible = "nvidia,tegra20-spdif";
> +		reg = <0x70002400 0x200>;
> +		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>,
> +			 <&tegra_car TEGRA20_CLK_SPDIF_IN>;
> +		clock-names = "spdif_out", "spdif_in";
> +		resets = <&tegra_car 10>;
> +		dmas = <&apbdma 3>, <&apbdma 3>;
> +		dma-names = "rx", "tx";
> +		#sound-dai-cells = <0>;
> +		status = "disabled";
> +
> +		assigned-clocks = <&tegra_car TEGRA20_CLK_SPDIF_OUT>;
> +		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_A_OUT0>;
> +	};
> +
>  	tegra_i2s1: i2s at 70002800 {
>  		compatible = "nvidia,tegra20-i2s";
>  		reg = <0x70002800 0x200>;
> 

@Thierry, this patch is made on top of [1].

[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=271954