[PATCH v2 1/5] soundwire: qcom: add support to missing transport params

[Pierre-Louis Bossart]

> soundwire-controller at 3210000 {
>      reg = <0 0x3210000 0 0x2000>;
>      compatible = "qcom,soundwire-v1.5.1";
>      interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
>      clocks = <&rxmacro>;
>      clock-names = "iface";
>      qcom,clock-stop-mode0;
>      qcom,din-ports = <0>;
>      qcom,dout-ports = <5>;
> 
>      qcom,ports-sinterval-low = /bits/ 8 <0x03 0x1F 0x1F 0x07 0x00>;
>      qcom,ports-offset1 = /bits/ 8 <0x00 0x00 0x0B 0x01 0x00>;
>      qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x0B 0x00 0x00>;
>      qcom,ports-hstart = /bits/ 8 <0xFF 0x03 0xFF 0xFF 0xFF>;
>      qcom,ports-hstop = /bits/ 8 <0xFF 0x06 0xFF 0xFF 0xFF>;
>      qcom,ports-word-length = /bits/ 8 <0x01 0x07 0x04 0xFF 0xFF>;
>      qcom,ports-block-pack-mode = /bits/ 8 <0xFF 0x00 0x01 0xFF 0xFF>;
>      qcom,ports-lane-control = /bits/ 8 <0x01 0x00 0x00 0x00 0x00>;
>      qcom,ports-block-group-count = /bits/ 8 <0xFF 0xFF 0xFF 0xFF 0x00>;
> 
>      #sound-dai-cells = <1>;
>      #address-cells = <2>;
>      #size-cells = <0>;
> };
>> properties that may or may not be valid. If this is intentional and 
>> desired, this should still be captured somehow, e.g. in the bindings 
>> documentation or in the code with a comment, no?
> 
> Yes, I agree with you on this, I should document this in bindings!

thanks for the explanations, it'd be useful indeed to document what this 
magic 0xFF value means.