[PATCH v3 3/3] ASoC: rt715:add micmute led state control supports

Hans de Goede hdegoede at redhat.com
Tue Jan 19 21:33:04 CET 2021


Hi,

On 1/19/21 5:33 PM, Limonciello, Mario wrote:
>>>> -----Original Message-----
>>>> From: Yuan, Perry <Perry_Yuan at Dell.com>
>>>> Sent: Tuesday, January 12, 2021 11:18
>>>> To: oder_chiou at realtek.com; perex at perex.cz; tiwai at suse.com;
>>>> hdegoede at redhat.com; mgross at linux.intel.com
>>>> Cc: lgirdwood at gmail.com; broonie at kernel.org; alsa-devel at alsa-project.org;
>>>> linux-kernel at vger.kernel.org; platform-driver-x86 at vger.kernel.org; Yuan,
>>>> Perry; Limonciello, Mario
>>>> Subject: [PATCH v3 3/3] ASoC: rt715:add micmute led state control supports
>>>>
>>>> From: Perry Yuan <perry_yuan at dell.com>
>>>>
>>>> Some new Dell system is going to support audio internal micphone
>>>> privacy setting from hardware level with micmute led state changing
>>>> When micmute hotkey pressed by user, soft mute will need to be enabled
>>>> firstly in case of pop noise, and codec driver need to react to mic
>>>> mute event to EC(embedded controller) notifying that SW mute is completed
>>>> Then EC will do the hardware mute physically within the timeout reached
>>>>
>>>> This patch allow codec rt715 driver to ack EC when micmute key pressed
>>>> through this micphone led control interface like hda_generic provided
>>>> ACPI method defined in dell-privacy micmute led trigger will be called
>>>> for notifying the EC that software mute has been completed
>>>>
>>>> Signed-off-by: Perry Yuan <perry_yuan at dell.com>
>>>>
>>>> --------
>>>> v2 -> v3
>>>> * simplify the patch to reuse some val value
>>>> * add more detail to the commit info
>>>>
>>>> v1 -> v2:
>>>> * fix some format issue
>>>> --------
>>>> ---
>>>>   sound/soc/codecs/rt715-sdca.c | 16 ++++++++++++++++
>>>>   sound/soc/codecs/rt715-sdca.h |  1 +
>>>>   sound/soc/codecs/rt715.c      | 14 ++++++++++++++
>>>>   sound/soc/codecs/rt715.h      |  1 +
>>>>   4 files changed, 32 insertions(+)
>>>>
>>>> diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
>>>> index b43ac8559e45..861a0d2a8957 100644
>>>> --- a/sound/soc/codecs/rt715-sdca.c
>>>> +++ b/sound/soc/codecs/rt715-sdca.c
>>>> @@ -12,6 +12,7 @@
>>>>   #include <linux/version.h>
>>>>   #include <linux/kernel.h>
>>>>   #include <linux/init.h>
>>>> +#include <linux/leds.h>
>>>>   #include <linux/pm_runtime.h>
>>>>   #include <linux/pm.h>
>>>>   #include <linux/soundwire/sdw.h>
>>>> @@ -244,6 +245,7 @@ static int rt715_sdca_get_volsw(struct snd_kcontrol
>>>> *kcontrol,
>>>>   	unsigned int max = mc->max;
>>>>   	int val;
>>>>
>>>> +	pr_err("++++++rt715_sdca_get_volsw++\n");
>>>>   	val = snd_soc_component_read(component, mc->reg);
>>>>   	if (val < 0)
>>>>   		return -EINVAL;
>>>> @@ -261,6 +263,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol
>>>> *kcontrol,
>>>>   	struct snd_ctl_elem_value *ucontrol)
>>>>   {
>>>>   	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
>>>> +	struct rt715_sdca_priv *rt715 =
>>>> snd_soc_component_get_drvdata(component);
>>>>   	struct soc_mixer_control *mc =
>>>>   		(struct soc_mixer_control *)kcontrol->private_value;
>>>>   	unsigned int val, val2, loop_cnt = 2, i;
>>>> @@ -268,6 +271,7 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol
>>>> *kcontrol,
>>>>   	unsigned int reg2 = mc->rreg;
>>>>   	unsigned int reg = mc->reg;
>>>>   	unsigned int max = mc->max;
>>>> +	unsigned int val0, val1;
>>>>   	int err;
>>>>
>>>>   	val = ucontrol->value.integer.value[0];
>>>> @@ -287,6 +291,18 @@ static int rt715_sdca_put_volsw(struct snd_kcontrol
>>>> *kcontrol,
>>>>   			return err;
>>>>   	}
>>>>
>>>> +#if IS_ENABLED(CONFIG_DELL_PRIVACY)
>>>> +	/* dell privacy LED trigger state changed by muted/unmute switch */
>>>> +	if (mc->invert) {
>>>> +		if (ucontrol->value.integer.value[0] || ucontrol-
>>>>> value.integer.value[1]) {
>>>> +			rt715->micmute_led = LED_OFF;
>>>> +		} else {
>>>> +			rt715->micmute_led = LED_ON;
>>>> +		}
>>>> +		ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led);
>>>> +	}
>>>> +#endif
>>>> +
>>>>   	return 0;
>>>>   }
>>>>
>>>> diff --git a/sound/soc/codecs/rt715-sdca.h b/sound/soc/codecs/rt715-sdca.h
>>>> index 840c237895dd..f8988ab88f80 100644
>>>> --- a/sound/soc/codecs/rt715-sdca.h
>>>> +++ b/sound/soc/codecs/rt715-sdca.h
>>>> @@ -31,6 +31,7 @@ struct rt715_sdca_priv {
>>>>   	int l_is_unmute;
>>>>   	int r_is_unmute;
>>>>   	int hw_sdw_ver;
>>>> +	bool micmute_led;
>>>>   };
>>>>
>>>>   struct rt715_sdw_stream_data {
>>>> diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
>>>> index cdcba70146da..b4e480744c94 100644
>>>> --- a/sound/soc/codecs/rt715.c
>>>> +++ b/sound/soc/codecs/rt715.c
>>>> @@ -13,6 +13,7 @@
>>>>   #include <linux/init.h>
>>>>   #include <linux/delay.h>
>>>>   #include <linux/i2c.h>
>>>> +#include <linux/leds.h>
>>>>   #include <linux/pm_runtime.h>
>>>>   #include <linux/pm.h>
>>>>   #include <linux/soundwire/sdw.h>
>>>> @@ -88,6 +89,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol
>>>> *kcontrol,
>>>>   		RT715_SET_GAIN_MIX_ADC2_L};
>>>>   	unsigned int addr_h, addr_l, val_h, val_ll, val_lr;
>>>>   	unsigned int read_ll, read_rl, i, j, loop_cnt;
>>>> +	unsigned int val0, val1;
>>>>
>>>>   	if (strstr(ucontrol->id.name, "Main Capture Switch") ||
>>>>   		strstr(ucontrol->id.name, "Main Capture Volume"))
>>>> @@ -95,6 +97,18 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol
>>>> *kcontrol,
>>>>   	else
>>>>   		loop_cnt = 1;
>>>>
>>>> +#if IS_ENABLED(CONFIG_DELL_PRIVACY)
>>>> +	/* Micmute LED state changed by muted/unmute switch */
>>>> +	if (mc->invert) {
>>>> +		if (ucontrol->value.integer.value[0] || ucontrol-
>>>>> value.integer.value[1]) {
>>>> +			rt715->micmute_led = LED_OFF;
>>>> +		} else {
>>>> +			rt715->micmute_led = LED_ON;
>>>> +		}
>>>> +		ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led);
>>>> +	}
>>>> +#endif
>>>> +
>>> You might have missed my other comment on v2 feedback, but is there a reason
>>> to keep it behind a compile time flag for dell privacy module?  In practice
>>> any other future led backend provider should work too.  Another way to think
>>> about it - if dell privacy wasn't enabled would this cause a problem to run
>>> this code?  I think it would just be a no-op.
>>>
>>>>   	for (j = 0; j < loop_cnt; j++) {
>>>>   		/* Can't use update bit function, so read the original value first
>>>> */
>>>>   		if (loop_cnt == 1) {
>>>> diff --git a/sound/soc/codecs/rt715.h b/sound/soc/codecs/rt715.h
>>>> index 009a8266f606..57c9af041181 100644
>>>> --- a/sound/soc/codecs/rt715.h
>>>> +++ b/sound/soc/codecs/rt715.h
>>>> @@ -22,6 +22,7 @@ struct rt715_priv {
>>>>   	struct sdw_bus_params params;
>>>>   	bool hw_init;
>>>>   	bool first_hw_init;
>>>> +	bool micmute_led;
>>>>   };
>>>>
>>>>   struct sdw_stream_data {
>>>> --
>>>> 2.25.1
>>
>> Pierre Louis suggested to just set the mic mute led state unconditionally .
>> It is more common interface to allow other platforms to change micmute led.
>> The discussion result is from "[PATCH v2 2/2] ASoC: rt715:add Mic Mute LED
>> control support"
>>
>> Here is the change compared to V3 ,the CONFIG_DELL_PRIVACY will be removed
>>
>> -#if IS_ENABLED(CONFIG_DELL_PRIVACY)
>> -       /* dell privacy LED trigger state changed by muted/unmute switch */
>> +       /* MicMute LED state changed by muted/unmute switch */
>>          if (mc->invert) {
>>                  if (ucontrol->value.integer.value[0] || ucontrol-
>>> value.integer.value[1]) {
>>                          rt715->micmute_led = LED_OFF;
>> diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
>> index b4e480744c94..60bb3d98103e 100644
>> --- a/sound/soc/codecs/rt715.c
>> +++ b/sound/soc/codecs/rt715.c
>> @@ -97,8 +97,7 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol
>> *kcontrol,
>>          else
>>                  loop_cnt = 1;
>>
>> -#if IS_ENABLED(CONFIG_DELL_PRIVACY)
>> -       /* Micmute LED state changed by muted/unmute switch */
>> +       /* MicMute LED state changed by muted/unmute switch */
>>          if (mc->invert) {
>>                  if (ucontrol->value.integer.value[0] || ucontrol-
>>> value.integer.value[1]) {
>>                          rt715->micmute_led = LED_OFF;
>> @@ -107,7 +106,6 @@ static int rt715_set_amp_gain_put(struct snd_kcontrol
>> *kcontrol,
>>                  }
>>                  ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led);
>>          }
>> -#endif
> 
> I'm not sure which thread, but I believe there was still also another suggestion
> that this should be made more "generic" and to work for all codecs.  So that when
> we have lets say a hypothetical rt717 we don't need the same in that module.

Right:


On 1/15/21 6:45 PM, Jaroslav Kysela wrote:
> Dne 12. 01. 21 v 18:18 Perry Yuan napsal(a):
> 
>> +#if IS_ENABLED(CONFIG_DELL_PRIVACY)
>> +	/* dell privacy LED trigger state changed by muted/unmute switch */
>> +	if (mc->invert) {
>> +		if (ucontrol->value.integer.value[0] || ucontrol->value.integer.value[1]) {
>> +			rt715->micmute_led = LED_OFF;
>> +		} else {
>> +			rt715->micmute_led = LED_ON;
>> +		}
>> +		ledtrig_audio_set(LED_AUDIO_MICMUTE, rt715->micmute_led);
>> +	}
>> +#endif
> 
> [removing lkml and x86-platform lists]
> 
> Looking to this code, perhaps, it may be a good idea to move the LED trigger
> handling from the low-level drivers and do it in the top-level control code
> (sound/core/control.c). Adding a new flag SNDRV_CTL_ELEM_ACCESS_MIC_LED may be
> an option and we can nicely handle the situation for multiple microphones (OR
> operation). The motivation is to remove the duplicated code.
> 
> The same situation is for the playback LED.

I believe that this is an excellent suggestion and that this is the way to go.

Regards,

Hans



More information about the Alsa-devel mailing list