[PATCH v2 1/9] ASoC: dt-bindings: rt5659: Update binding doc

[Sameer Pujar]

Hi Rob,

On 2/5/2021 8:59 PM, Rob Herring wrote:
> External email: Use caution opening links or attachments
>
>
> On Fri, Jan 29, 2021 at 11:57:38PM +0530, Sameer Pujar wrote:
>> Update following in rt5659.txt binding doc
>>    - Add JD source for Intel HDA header: Commit 041e74b71491
>>      ("ASoC: rt5659: Add the support of Intel HDA Header")
>>      added driver support. Add missing info here.
>>
>>    - sound-name-prefix: Used to prefix component widgets/kcontrols
>>      with given prefix.
>>
>>    - ports: Helps to use the Codec with audio graph card
>>
>> Signed-off-by: Sameer Pujar <spujar at nvidia.com>
>> Reported-by: Jon Hunter <jonathanh at nvidia.com>
>> Cc: Oder Chiou <oder_chiou at realtek.com>
>> Cc: Bard Liao <bardliao at realtek.com>
>> ---
>>   Documentation/devicetree/bindings/sound/rt5659.txt | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
>> index 56788f5..c473df5 100644
>> --- a/Documentation/devicetree/bindings/sound/rt5659.txt
>> +++ b/Documentation/devicetree/bindings/sound/rt5659.txt
>> @@ -37,10 +37,21 @@ Optional properties:
>>   - realtek,jd-src
>>     0: No JD is used
>>     1: using JD3 as JD source
>> +  2: JD source for Intel HDA header
>>
>>   - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
>>   - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
>>
>> +- sound-name-prefix: Please refer to name-prefix.txt
>> +
>> +- ports: A Codec may have a single or multiple I2S interfaces. These
>> +  interfaces on Codec side can be described under 'ports' or 'port'.
>> +  When the SoC or host device is connected to multiple interfaces of
>> +  the Codec, the connectivity can be described using 'ports' property.
>> +  If a single interface is used, then 'port' can be used. The usage
>> +  depends on the platform or board design.
>> +  Please refer to Documentation/devicetree/bindings/graph.txt
> Please read what that file says now.

Sorry, I did not understand above comment. Can you please elaborate a 
bit more?