[PATCH v2 3/3] ASoC: cs4265: Add a remove() function

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

When the reset_gpio GPIO is used, it is better to put the codec
back into reset state when the driver unbinds.

Add a remove() function to accomplish that.

Suggested-by: Charles Keepax <ckeepax at opensource.cirrus.com>
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Changes since v1:
- Newly introduced patch.

 sound/soc/codecs/cs4265.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/soc/codecs/cs4265.c b/sound/soc/codecs/cs4265.c
index 294fa7ac16cb..8fa166e4b2a9 100644
--- a/sound/soc/codecs/cs4265.c
+++ b/sound/soc/codecs/cs4265.c
@@ -626,6 +626,16 @@ static int cs4265_i2c_probe(struct i2c_client *i2c_client,
 			ARRAY_SIZE(cs4265_dai));
 }
 
+static int cs4265_i2c_remove(struct i2c_client *i2c)
+{
+	struct cs4265_private *cs4265 = i2c_get_clientdata(i2c);
+
+	if (cs4265->reset_gpio)
+		gpiod_set_value_cansleep(cs4265->reset_gpio, 1);
+
+	return 0;
+}
+
 static const struct of_device_id cs4265_of_match[] = {
 	{ .compatible = "cirrus,cs4265", },
 	{ }
@@ -645,6 +655,7 @@ static struct i2c_driver cs4265_i2c_driver = {
 	},
 	.id_table = cs4265_id,
 	.probe =    cs4265_i2c_probe,
+	.remove =   cs4265_i2c_remove,
 };
 
 module_i2c_driver(cs4265_i2c_driver);
-- 
2.25.1