[PATCH 2/2] ASoC: intel: sof_rt5682: Add quirk for Dooly

[Lu, Brent]

, Brent Lu wrote:
> > This DMI product family string of this board is "Google_Hatch" so the
> > DMI quirk will take place. However, this board is using rt1015 speaker
> > amp instead of max98357a specified in the quirk. Therefore, we need an
> > new DMI quirk for this board.
> 
> Do you actually need a DMI quirk for this platform?
> 
> the .driver_data below uses the exact same settings as what you would use
> with the generic solution based on ACPI IDs, see below.
> 
> Wondering if patch1 would be enough?
> 

Dooly has DMI family string " Google_Hatch" so the DMI quirk will overwrite the
driver_data. I asked google but they prefer not removing this string so it seems to
me that one extra DMI quirk is needed.

                {
                                .callback = sof_rt5682_quirk_cb,
                                .matches = {
                                                DMI_MATCH(DMI_PRODUCT_FAMILY, "Google_Hatch"),
                                },
                                .driver_data = (void *)(SOF_RT5682_MCLK_EN |
                                                                                SOF_RT5682_MCLK_24MHZ |
                                                                                SOF_RT5682_SSP_CODEC(0) |
                                                                                SOF_SPEAKER_AMP_PRESENT |
                                                                                SOF_RT5682_SSP_AMP(1)),
                },

The other way is using acpi_dev_present() in probe to update the quirk with correct
codec setting. Which one do you think is better?


Regards,
Brent