[PATCH 1/2] ASoC: rt5682: fix the random recording noise of headset

[Keyon Jie]

On 3/18/20 2:07 PM, Albert Chen wrote:
> 
> 
> -----Original Message-----
> From: Keyon Jie <yang.jie at linux.intel.com>
> Sent: Wednesday, March 18, 2020 11:31 AM
> To: Albert Chen <albertchen at realtek.com>; Shuming [范書銘] <shumingf at realtek.com>; broonie at kernel.org; lgirdwood at gmail.com
> Cc: Oder Chiou <oder_chiou at realtek.com>; Jack Yu <jack.yu at realtek.com>; alsa-devel at alsa-project.org; lars at metafoo.de; Derek [方德義] <derek.fang at realtek.com>; sathya.prakash.m.r at intel.com; Flove(HsinFu) <flove at realtek.com>
> Subject: Re: [PATCH 1/2] ASoC: rt5682: fix the random recording noise of headset
> 
> 
> On 3/18/20 11:06 AM, Albert Chen wrote:
>> Dear Sir,
>>
>> Inline.
>>
>> Thanks,
>> Albert
>>
>> -----Original Message-----
>> From: Keyon Jie <yang.jie at linux.intel.com>
>> Sent: Wednesday, March 18, 2020 10:32 AM
>> To: Shuming [范書銘] <shumingf at realtek.com>; broonie at kernel.org;
>> lgirdwood at gmail.com
>> Cc: Oder Chiou <oder_chiou at realtek.com>; Jack Yu
>> <jack.yu at realtek.com>; alsa-devel at alsa-project.org; lars at metafoo.de;
>> Albert Chen <albertchen at realtek.com>; Derek [方德義]
>> <derek.fang at realtek.com>; sathya.prakash.m.r at intel.com; Flove(HsinFu)
>> <flove at realtek.com>
>> Subject: Re: [PATCH 1/2] ASoC: rt5682: fix the random recording noise
>> of headset
>>
>> On 3/17/20 3:33 PM, shumingf at realtek.com wrote:
>>> From: Shuming Fan <shumingf at realtek.com>
>>>
>>> The cycle time of FIFO clock should increase 2 times to avoid the
>>> random recording noise issue.
>>> This setting could apply to all known situations in i2s mode.
>>
>> Thanks for fixing this Shuming.
>>
>> Just try to understand what has happened.
>>
>> Can you help share more details about it, e.g.
>> 1. the recording noise happened on headset mic or dmic?
>> <Albert> Headset Mic
>> 2. will this change impact the microphone sampling clock, or the BCLK that of the I2S bclk pin?
>> <Albert> No.
>> 3. without this change, why the clk is wrong, some example?
>> <Albert> Only adjust FIFO buffer setting.
> 
> Where is the FIFO buffer you mentioned located? Is it included in the path "headset mic ADC--(loopback)-->ADC headphone"?
> <Albert> I2S interface.
> 
> The issue was reported to Intel also, that's why I am querying this here.
> 
>  From previous feedback, Shuming shared that the loopback path mentioned above don't have this random noise issue.
> 
> <Albert>These are have total two recording random noise issues, one is the PCB trace design and another is Codec setting, Our previous reported is PCB trace cause noise.

Okay, thanks for explaining. Looks good to me now. :)

Thanks,
~Keyon

> 
> Thanks,
> ~Keyon
> 
>>
>> Thanks,
>> ~Keyon
>>
>>>
>>> Signed-off-by: Shuming Fan <shumingf at realtek.com>
>>> ---
>>>     sound/soc/codecs/rt5682.c | 2 ++
>>>     sound/soc/codecs/rt5682.h | 2 ++
>>>     2 files changed, 4 insertions(+)
>>>
>>> diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
>>> index 7ca02a5e52e9..023bc672274b 100644
>>> --- a/sound/soc/codecs/rt5682.c
>>> +++ b/sound/soc/codecs/rt5682.c
>>> @@ -3643,6 +3643,8 @@ static int rt5682_i2c_probe(struct i2c_client *i2c,
>>>     			RT5682_CP_CLK_HP_MASK, RT5682_CP_CLK_HP_300KHZ);
>>>     	regmap_update_bits(rt5682->regmap, RT5682_HP_CHARGE_PUMP_1,
>>>     			RT5682_PM_HP_MASK, RT5682_PM_HP_HV);
>>> +	regmap_update_bits(rt5682->regmap, RT5682_DMIC_CTRL_1,
>>> +			RT5682_FIFO_CLK_DIV_MASK, RT5682_FIFO_CLK_DIV_2);
>>>     
>>>     	INIT_DELAYED_WORK(&rt5682->jack_detect_work,
>>>     				rt5682_jack_detect_handler);
>>> diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
>>> index 43de6e802309..0baeece84ec4 100644
>>> --- a/sound/soc/codecs/rt5682.h
>>> +++ b/sound/soc/codecs/rt5682.h
>>> @@ -657,6 +657,8 @@
>>>     #define RT5682_DMIC_1_EN_SFT			15
>>>     #define RT5682_DMIC_1_DIS			(0x0 << 15)
>>>     #define RT5682_DMIC_1_EN			(0x1 << 15)
>>> +#define RT5682_FIFO_CLK_DIV_MASK		(0x7 << 12)
>>> +#define RT5682_FIFO_CLK_DIV_2			(0x1 << 12)
>>>     #define RT5682_DMIC_1_DP_MASK			(0x3 << 4)
>>>     #define RT5682_DMIC_1_DP_SFT			4
>>>     #define RT5682_DMIC_1_DP_GPIO2			(0x0 << 4)
>>>
>>
>> ------Please consider the environment before printing this e-mail.
>>