[PATCH v2 1/2] ASoC: qcom: sdm845: handle soundwire stream

Srinivas Kandagatla srinivas.kandagatla at linaro.org
Tue Mar 17 16:12:32 CET 2020


In existing setup WSA881x codec handles soundwire stream,
however DB845c and other machines based on SDM845c have 2
instances for WSA881x codec. This will force soundwire stream
to be prepared/enabled twice or multiple times.
Handling SoundWire Stream in machine driver would fix this issue.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
---
 sound/soc/qcom/Kconfig  |  2 +-
 sound/soc/qcom/sdm845.c | 67 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 68 insertions(+), 1 deletion(-)

diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 6530d2462a9e..f51b28d1b94d 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -99,7 +99,7 @@ config SND_SOC_MSM8996
 
 config SND_SOC_SDM845
 	tristate "SoC Machine driver for SDM845 boards"
-	depends on QCOM_APR && CROS_EC && I2C
+	depends on QCOM_APR && CROS_EC && I2C && SOUNDWIRE
 	select SND_SOC_QDSP6
 	select SND_SOC_QCOM_COMMON
 	select SND_SOC_RT5663
diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 3ac02204a706..67a55edf755f 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -11,6 +11,7 @@
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
 #include <sound/soc.h>
+#include <linux/soundwire/sdw.h>
 #include <uapi/linux/input-event-codes.h>
 #include "common.h"
 #include "qdsp6/q6afe.h"
@@ -31,10 +32,12 @@
 struct sdm845_snd_data {
 	struct snd_soc_jack jack;
 	bool jack_setup;
+	bool stream_prepared[SLIM_MAX_RX_PORTS];
 	struct snd_soc_card *card;
 	uint32_t pri_mi2s_clk_count;
 	uint32_t sec_mi2s_clk_count;
 	uint32_t quat_tdm_clk_count;
+	struct sdw_stream_runtime *sruntime[SLIM_MAX_RX_PORTS];
 };
 
 static unsigned int tdm_slot_offset[8] = {0, 4, 8, 12, 16, 20, 24, 28};
@@ -45,11 +48,18 @@ static int sdm845_slim_snd_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 	struct snd_soc_dai *codec_dai;
+	struct sdm845_snd_data *pdata = snd_soc_card_get_drvdata(rtd->card);
 	u32 rx_ch[SLIM_MAX_RX_PORTS], tx_ch[SLIM_MAX_TX_PORTS];
+	struct sdw_stream_runtime *sruntime;
 	u32 rx_ch_cnt = 0, tx_ch_cnt = 0;
 	int ret = 0, i;
 
 	for_each_rtd_codec_dais(rtd, i, codec_dai) {
+		sruntime = snd_soc_dai_get_sdw_stream(codec_dai,
+						      substream->stream);
+		if (sruntime != ERR_PTR(-ENOTSUPP))
+			pdata->sruntime[cpu_dai->id] = sruntime;
+
 		ret = snd_soc_dai_get_channel_map(codec_dai,
 				&tx_ch_cnt, tx_ch, &rx_ch_cnt, rx_ch);
 
@@ -425,8 +435,65 @@ static void  sdm845_snd_shutdown(struct snd_pcm_substream *substream)
 	}
 }
 
+static int sdm845_snd_prepare(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+	int ret;
+
+	if (!sruntime)
+		return 0;
+
+	if (data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	ret = sdw_prepare_stream(sruntime);
+	if (ret)
+		return ret;
+
+	/**
+	 * NOTE: there is a strict hw requirement about the ordering of port
+	 * enables and actual WSA881x PA enable. PA enable should only happen
+	 * after soundwire ports are enabled if not DC on the line is
+	 * accumulated resulting in Click/Pop Noise
+	 * PA enable/mute are handled as part of codec DAPM and digital mute.
+	 */
+
+	ret = sdw_enable_stream(sruntime);
+	if (ret) {
+		sdw_deprepare_stream(sruntime);
+		return ret;
+	}
+	data->stream_prepared[cpu_dai->id] = true;
+
+	return ret;
+}
+
+static int sdm845_snd_hw_free(struct snd_pcm_substream *substream)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct sdm845_snd_data *data = snd_soc_card_get_drvdata(rtd->card);
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	struct sdw_stream_runtime *sruntime = data->sruntime[cpu_dai->id];
+
+	if (sruntime && data->stream_prepared[cpu_dai->id]) {
+		sdw_disable_stream(sruntime);
+		sdw_deprepare_stream(sruntime);
+		data->stream_prepared[cpu_dai->id] = false;
+	}
+
+	return 0;
+}
+
 static const struct snd_soc_ops sdm845_be_ops = {
 	.hw_params = sdm845_snd_hw_params,
+	.hw_free = sdm845_snd_hw_free,
+	.prepare = sdm845_snd_prepare,
 	.startup = sdm845_snd_startup,
 	.shutdown = sdm845_snd_shutdown,
 };
-- 
2.21.0



More information about the Alsa-devel mailing list