[PATCH v4 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

Rohit Kumar rohitkr at codeaurora.org
Mon Aug 3 10:28:34 CEST 2020


Thanks Rob for reviewing

On 7/23/2020 10:46 PM, Rob Herring wrote:
> On Wed, Jul 22, 2020 at 04:01:55PM +0530, Rohit kumar wrote:
>> Update lpass-cpu binding with yaml formats.
>>
>> Signed-off-by: Rohit kumar <rohitkr at codeaurora.org>
>> ---
>>   .../devicetree/bindings/sound/qcom,lpass-cpu.txt   | 130 ---------------
>>   .../devicetree/bindings/sound/qcom,lpass-cpu.yaml  | 185 +++++++++++++++++++++
>>   2 files changed, 185 insertions(+), 130 deletions(-)
>>   delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>>   create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> deleted file mode 100644
>> index c21392e..00000000
>> --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt
>> +++ /dev/null
>> @@ -1,130 +0,0 @@
>> -* Qualcomm Technologies LPASS CPU DAI
>> -
>> -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).
>> -
>> -Required properties:
>> -
>> -- compatible		: "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or
>> -			  "qcom,lpass-cpu-sc7180"
>> -- clocks		: Must contain an entry for each entry in clock-names.
>> -- clock-names		: A list which must include the following entries:
>> -				* "ahbix-clk"
>> -				* "mi2s-osr-clk"
>> -				* "mi2s-bit-clk"
>> -			: required clocks for "qcom,lpass-cpu-apq8016"
>> -				* "ahbix-clk"
>> -				* "mi2s-bit-clk0"
>> -				* "mi2s-bit-clk1"
>> -				* "mi2s-bit-clk2"
>> -				* "mi2s-bit-clk3"
>> -				* "pcnoc-mport-clk"
>> -				* "pcnoc-sway-clk"
>> -			: required clocks for "qcom,lpass-cpu-sc7180"
>> -				* "audio-core"
>> -				* "mclk0"
>> -				* "mi2s-bit-clk0"
>> -				* "mi2s-bit-clk1"
>> -				* "pcnoc-sway-clk"
>> -				* "pcnoc-mport-clk"
>> -
>> -- interrupts		: Must contain an entry for each entry in
>> -			  interrupt-names.
>> -- interrupt-names	: A list which must include the following entries:
>> -				* "lpass-irq-lpaif"
>> -- pinctrl-N		: One property must exist for each entry in
>> -			  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
>> -			  for details of the property values.
>> -- pinctrl-names		: Must contain a "default" entry.
>> -- reg			: Must contain an address for each entry in reg-names.
>> -- reg-names		: A list which must include the following entries:
>> -				* "lpass-lpaif"
>> -- #address-cells	: Must be 1
>> -- #size-cells		: Must be 0
>> -
>> -
>> -
>> -Optional properties:
>> -
>> -- qcom,adsp		: Phandle for the audio DSP node
>> -
>> -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels.
>> -The SD lines to use can be configured by adding subnodes for each of the DAIs.
>> -
>> -Required properties for each DAI (represented by a subnode):
>> -- reg			: Must be one of the DAI IDs
>> -			  (usually part of dt-bindings header)
>> -- qcom,playback-sd-lines: List of serial data lines to use for playback
>> -			  Each SD line should be represented by a number from 0-3.
>> -- qcom,capture-sd-lines	: List of serial data lines to use for capture
>> -			  Each SD line should be represented by a number from 0-3.
>> -
>> -Note that adding a subnode changes the default to "no lines configured",
>> -so both playback and capture lines should be configured when a subnode is added.
>> -
>> -Examples:
>> -1)
>> -
>> -lpass at 28100000 {
>> -	compatible = "qcom,lpass-cpu";
>> -	clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
>> -	clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
>> -	interrupts = <0 85 1>;
>> -	interrupt-names = "lpass-irq-lpaif";
>> -	pinctrl-names = "default", "idle";
>> -	pinctrl-0 = <&mi2s_default>;
>> -	pinctrl-1 = <&mi2s_idle>;
>> -	reg = <0x28100000 0x10000>;
>> -	reg-names = "lpass-lpaif";
>> -	qcom,adsp = <&adsp>;
>> -
>> -	#address-cells = <1>;
>> -	#size-cells = <0>;
>> -
>> -	/* Optional to set different MI2S SD lines */
>> -	dai at 3 {
>> -		reg = <MI2S_QUATERNARY>;
>> -		qcom,playback-sd-lines = <0 1>;
>> -	};
>> -};
>> -
>> -2)
>> -
>> -#include <dt-bindings/sound/sc7180-lpass.h>
>> -
>> -lpass_cpu: lpass {
>> -	compatible = "qcom,lpass-cpu-sc7180";
>> -
>> -	reg = <0 0x62F00000 0 0x29000>;
>> -
>> -	iommus = <&apps_smmu 0x1020 0>;
>> -
>> -	power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
>> -	clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,
>> -		<&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
>> -		<&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
>> -		<&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
>> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
>> -		<&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
>> -	clock-names = "pcnoc-sway-clk", "audio-core",
>> -			"mclk0", "pcnoc-mport-clk",
>> -			"mi2s-bit-clk0", "mi2s-bit-clk1";
>> -	interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
>> -	interrupt-names = "lpass-irq-lpaif";
>> -
>> -
>> -	#sound-dai-cells = <1>;
>> -
>> -	#address-cells = <1>;
>> -	#size-cells = <0>;
>> -
>> -	mi2s-primary at 0 {
>> -		reg = <MI2S_PRIMARY>;
>> -		qcom,playback-sd-lines = <1>;
>> -		qcom,capture-sd-lines = <0>;
>> -	};
>> -
>> -	mi2s-secondary at 1 {
>> -		reg = <MI2S_SECONDARY>;
>> -		qcom,playback-sd-lines = <0>;
>> -	};
>> -};
>> diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> new file mode 100644
>> index 00000000..03c598f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml
>> @@ -0,0 +1,185 @@
>> +# SPDX-License-Identifier: GPL-2.0-only
> If all the authors are QCom or Linaro please dual license.
Ok
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm LPASS CPU dai driver bindings
>> +
>> +maintainers:
>> +  - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> +  - Rohit kumar <rohitkr at codeaurora.org>
>> +
>> +description: |
>> +  Qualcomm SOC Low-Power Audio SubSystem (LPASS) that consist of MI2S interface
>> +  for audio data transfer on external codecs. LPASS cpu driver is a module to
>> +  configure Low-Power Audio Interface(LPAIF) core registers across different
>> +  IP versions.
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - const: qcom,lpass-cpu
>> +        description: For IPQ806x
>> +
>> +      - const: qcom,apq8016-lpass-cpu
>> +        description: For APQ8016
>> +
>> +      - const: qcom,lpass-cpu-sc7180
>> +        description: For SC7180
> Use enum rather than oneOf+const
Sure
>> +
>> +  reg:
>> +    maxItems: 1
>> +    description: LPAIF core registers
>> +
>> +  clocks:
>> +    minItems: 3
>> +    maxItems: 6
>> +
>> +  clock-names:
>> +    minItems: 3
>> +    maxItems: 6
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +    description: LPAIF DMA buffer interrupt
>> +
>> +  qcom,adsp:
>> +    $ref: /schemas/types.yaml#/definitions/phandle
>> +    description: Phandle for the audio DSP node
>> +
>> +  iommus:
>> +    maxItems: 1
>> +    description: Phandle to apps_smmu node with sid mask
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +  '#sound-dai-cells':
>> +    const: 1
>> +
>> +patternProperties:
>> +  "(^mi2s-[0-9a-f]$|mi2s)":
>> +    type: object
>> +    description: Required properties for each DAI
>> +
>> +    properties:
>> +      reg:
>> +        maxItems: 1
>> +        description: Must be one of the DAI ID
>> +
>> +    required:
>> +      - reg
>> +
>> +
> Extra blank line.
Ok
>> +required:
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - interrupts
>> +  - '#sound-dai-cells'
> Add:
>
> additionalProperties: false

If I am adding this, I am getting below error:

Documentation/devicetree/bindings/sound/qcom,lpass-cpu.example.dt.yaml: 
lpass at 62f00000: '#address-cells', '#size-cells' do not match any of the 
regexes: '(^mi2s-[0-9a-f]$|mi2s)', 'pinctrl-[0-9]+'


I think  this is coming because we have not mentioned mi2s-primary at 0 in 
required fields.
The field name is variable based on the interface to which peripheral is 
connected to.
It can be either of primary/secondary/tertiary/quaternary. Can you 
please suggest how to
avoid this error?
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: qcom,lpass-cpu-sc7180
>> +
>> +    then:
>> +      required:
>> +        - iommus
>> +        - power-domains
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: qcom,lpass-cpu
>> +
>> +    then:
>> +      properties:
>> +        clock-names:
>> +          items:
>> +            - const: ahbix-clk
>> +            - const: mi2s-osr-clk
>> +            - const: mi2s-bit-clk
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: qcom,apq8016-lpass-cpu
>> +
>> +    then:
>> +      properties:
>> +        clock-names:
>> +          items:
>> +            - const: ahbix-clk
>> +            - const: mi2s-bit-clk0
>> +            - const: mi2s-bit-clk1
>> +            - const: mi2s-bit-clk2
>> +            - const: mi2s-bit-clk3
>> +            - const: pcnoc-mport-clk
>> +            - const: pcnoc-sway-clk
>> +
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: qcom,lpass-cpu-sc7180
> You already have the same condition previously. Combine into 1.
Ok
>> +
>> +    then:
>> +      properties:
>> +        clock-names:
>> +          items:
>> +            - const: pcnoc-sway-clk
>> +            - const: audio-core
>> +            - const: mclk0
>> +            - const: pcnoc-mport-clk
>> +            - const: mi2s-bit-clk0
>> +            - const: mi2s-bit-clk1
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/sound/sc7180-lpass.h>
>> +
>> +    soc {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +        lpass at 62f00000 {
>> +            compatible = "qcom,lpass-cpu-sc7180";
>> +
>> +            reg = <0 0x62f00000  0 0x29000>;
>> +
>> +            iommus = <&apps_smmu 0x1020 0>;
>> +            power-domains = <&lpass_hm 0>;
>> +
>> +            clocks = <&gcc 131>,
>> +                 <&lpasscorecc 6>,
>> +                 <&lpasscorecc 7>,
>> +                 <&lpasscorecc 10>,
>> +                 <&lpasscorecc 8>,
>> +                 <&lpasscorecc 9>;
>> +
>> +            clock-names = "pcnoc-sway-clk", "audio-core",
>> +                          "mclk0", "pcnoc-mport-clk",
>> +                          "mi2s-bit-clk0", "mi2s-bit-clk1";
>> +
>> +            interrupts = <0 160 1>;
>> +
>> +            #sound-dai-cells = <1>;
>> +
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            /* Optional to set different MI2S SD lines */
>> +            mi2s-primary at 0 {
>> +                reg = <MI2S_PRIMARY>;
>> +                qcom,playback-sd-lines = <1>;
>> +                qcom,capture-sd-lines = <0>;
>> +            };
>> +        };
>> +    };
>> +
>> +...
>> -- 
>> Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
>> is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.

Thanks,

Rohit

-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.



More information about the Alsa-devel mailing list