[alsa-devel] [PATCH 06/13] ASoC: SOF: pcm: harden PCM STOP sequence

Pierre-Louis Bossart pierre-louis.bossart at linux.intel.com
Fri Sep 27 22:05:31 CEST 2019


From: Pan Xiuli <xiuli.pan at linux.intel.com>

The old STOP sequence is: 1. stop DMA 2. send STOP ipc
If delay happen before the steps 1 and 2, the DMA buffer will be empty in
short time and cause pipeline xrun then stop the pipeline.
Then the step 2 ipc stop will return error as pipeline is already stopped.

Suggested change to avoid the issue is to switch the order of steps 1 and 2
for the stop sequence.

Signed-off-by: Pan Xiuli <xiuli.pan at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
 sound/soc/sof/pcm.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sof/pcm.c b/sound/soc/sof/pcm.c
index fa7769dd825c..2b876d497447 100644
--- a/sound/soc/sof/pcm.c
+++ b/sound/soc/sof/pcm.c
@@ -323,6 +323,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	struct sof_ipc_stream stream;
 	struct sof_ipc_reply reply;
 	bool reset_hw_params = false;
+	bool ipc_first = false;
 	int ret;
 
 	/* nothing to do for BE */
@@ -343,6 +344,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
 		stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_PAUSE;
+		ipc_first = true;
 		break;
 	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
 		stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_RELEASE;
@@ -363,6 +365,7 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 	case SNDRV_PCM_TRIGGER_SUSPEND:
 	case SNDRV_PCM_TRIGGER_STOP:
 		stream.hdr.cmd |= SOF_IPC_STREAM_TRIG_STOP;
+		ipc_first = true;
 		reset_hw_params = true;
 		break;
 	default:
@@ -370,12 +373,22 @@ static int sof_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
 		return -EINVAL;
 	}
 
-	snd_sof_pcm_platform_trigger(sdev, substream, cmd);
+	/*
+	 * DMA and IPC sequence is different for start and stop. Need to send
+	 * STOP IPC before stop DMA
+	 */
+	if (!ipc_first)
+		snd_sof_pcm_platform_trigger(sdev, substream, cmd);
 
 	/* send IPC to the DSP */
 	ret = sof_ipc_tx_message(sdev->ipc, stream.hdr.cmd, &stream,
 				 sizeof(stream), &reply, sizeof(reply));
 
+	/* need to STOP DMA even if STOP IPC failed */
+	if (ipc_first)
+		snd_sof_pcm_platform_trigger(sdev, substream, cmd);
+
+	/* free PCM if reset_hw_params is set and the STOP IPC is successful */
 	if (!ret && reset_hw_params)
 		ret = sof_pcm_dsp_pcm_free(substream, sdev, spcm);
 
-- 
2.20.1



More information about the Alsa-devel mailing list