[alsa-devel] [PATCH V4 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8

S.j. Wang shengjiu.wang at nxp.com
Wed Sep 25 05:34:44 CEST 2019


Hi

> On Tue, Sep 24, 2019 at 06:52:35PM +0800, Shengjiu Wang wrote:
> > There is error "aplay: pcm_write:2023: write error: Input/output error"
> > on i.MX8QM/i.MX8QXP platform for S24_3LE format.
> >
> > In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
> > sample, but we didn't add any constraint, that cause issues.
> >
> > So we need to query the caps of dma, then update the hw parameters
> > according to the caps.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
> > ---
> >  sound/soc/fsl/fsl_asrc.c     |  4 +--
> >  sound/soc/fsl/fsl_asrc.h     |  3 ++
> >  sound/soc/fsl/fsl_asrc_dma.c | 59
> > +++++++++++++++++++++++++++++++-----
> >  3 files changed, 56 insertions(+), 10 deletions(-)
> >
> > @@ -270,12 +268,17 @@ static int fsl_asrc_dma_hw_free(struct
> > snd_pcm_substream *substream)
> >
> >  static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
> > {
> > +     bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> >       struct snd_soc_pcm_runtime *rtd = substream->private_data;
> >       struct snd_pcm_runtime *runtime = substream->runtime;
> >       struct snd_soc_component *component =
> snd_soc_rtdcom_lookup(rtd,
> > DRV_NAME);
> > +     struct snd_dmaengine_dai_dma_data *dma_data;
> >       struct device *dev = component->dev;
> >       struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
> >       struct fsl_asrc_pair *pair;
> > +     struct dma_chan *tmp_chan = NULL;
> > +     u8 dir = tx ? OUT : IN;
> > +     int ret = 0;
> >
> >       pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
> 
> Sorry, I didn't catch it previously. We would need to release this memory
> also for all error-out paths, as the code doesn't have any error-out routine,
> prior to applying this change.
> 
> >       if (!pair)
> > @@ -285,11 +288,51 @@ static int fsl_asrc_dma_startup(struct
> > snd_pcm_substream *substream)
> 
> > +     /* Request a dummy pair, which will be released later.
> > +      * Request pair function needs channel num as input, for this
> > +      * dummy pair, we just request "1" channel temporary.
> > +      */
> 
> "temporary" => "temporarily"
> 
> > +     ret = fsl_asrc_request_pair(1, pair);
> > +     if (ret < 0) {
> > +             dev_err(dev, "failed to request asrc pair\n");
> > +             return ret;
> > +     }
> > +
> > +     /* Request a dummy dma channel, which will be release later. */
> 
> "release" => "released"

Ok, will update them.

Best regards
Wang shengjiu


More information about the Alsa-devel mailing list