[alsa-devel] [PATCH v5 2/6] ASoC: sgtl5000: Improve VAG power and mute control

Igor Opaniuk igor.opaniuk at toradex.com
Thu Jul 18 18:18:46 CEST 2019


On Thu, Jul 18, 2019 at 12:03 PM Oleksandr Suvorov
<oleksandr.suvorov at toradex.com> wrote:
>
> VAG power control is improved to fit the manual [1]. This patch fixes as
> minimum one bug: if customer muxes Headphone to Line-In right after boot,
> the VAG power remains off that leads to poor sound quality from line-in.
>
> I.e. after boot:
>   - Connect sound source to Line-In jack;
>   - Connect headphone to HP jack;
>   - Run following commands:
>   $ amixer set 'Headphone' 80%
>   $ amixer set 'Headphone Mux' LINE_IN
>
> Change VAG power on/off control according to the following algorithm:
>   - turn VAG power ON on the 1st incoming event.
>   - keep it ON if there is any active VAG consumer (ADC/DAC/HP/Line-In).
>   - turn VAG power OFF when there is the latest consumer's pre-down event
>     come.
>   - always delay after VAG power OFF to avoid pop.
>   - delay after VAG power ON if the initiative consumer is Line-In, this
>     prevents pop during line-in muxing.
>
> According to the data sheet [1], to avoid any pops/clicks,
> the outputs should be muted during input/output
> routing changes.
>
> [1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
>
> Cc: stable at vger.kernel.org
> Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support")
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at toradex.com>
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
>
> ---
>
> Changes in v5:
> - Improve commit message
> - Add explicit stable tag
>
> Changes in v4:
> - Code optimization, simplify function signature
>   (thanks to Cezary Rojewski <cezary.rojewski at intel.com> for an idea)
> - CC the patch to kernel-stable
> - Add a Fixes tag
>
> Changes in v3:
> - Add the reference to NXP SGTL5000 data sheet to commit message
>
> Changes in v2:
> - Fix patch formatting
>
>  sound/soc/codecs/sgtl5000.c | 216 ++++++++++++++++++++++++++++++------
>  1 file changed, 185 insertions(+), 31 deletions(-)
>
> diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
> index a6a4748c97f9d..a2aeb5fb9b537 100644
> --- a/sound/soc/codecs/sgtl5000.c
> +++ b/sound/soc/codecs/sgtl5000.c
> @@ -31,6 +31,13 @@
>  #define SGTL5000_DAP_REG_OFFSET        0x0100
>  #define SGTL5000_MAX_REG_OFFSET        0x013A
>
> +/* Delay for the VAG ramp up */
> +#define SGTL5000_VAG_POWERUP_DELAY 500 /* ms */
> +/* Delay for the VAG ramp down */
> +#define SGTL5000_VAG_POWERDOWN_DELAY 500 /* ms */
> +
> +#define SGTL5000_OUTPUTS_MUTE (SGTL5000_HP_MUTE | SGTL5000_LINE_OUT_MUTE)
> +
>  /* default value of sgtl5000 registers */
>  static const struct reg_default sgtl5000_reg_defaults[] = {
>         { SGTL5000_CHIP_DIG_POWER,              0x0000 },
> @@ -123,6 +130,19 @@ enum  {
>         I2S_SCLK_STRENGTH_HIGH,
>  };
>
> +enum {
> +       HP_POWER_EVENT,
> +       DAC_POWER_EVENT,
> +       ADC_POWER_EVENT,
> +       LAST_POWER_EVENT
> +};
> +
> +static u16 mute_mask[] = {
> +       SGTL5000_HP_MUTE,
> +       SGTL5000_OUTPUTS_MUTE,
> +       SGTL5000_OUTPUTS_MUTE
> +};
> +
>  /* sgtl5000 private structure in codec */
>  struct sgtl5000_priv {
>         int sysclk;     /* sysclk rate */
> @@ -137,8 +157,109 @@ struct sgtl5000_priv {
>         u8 micbias_voltage;
>         u8 lrclk_strength;
>         u8 sclk_strength;
> +       u16 mute_state[LAST_POWER_EVENT];
>  };
>
> +static inline int hp_sel_input(struct snd_soc_component *component)
> +{
> +       return (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_CTRL) &
> +               SGTL5000_HP_SEL_MASK) >> SGTL5000_HP_SEL_SHIFT;
> +}
> +
> +static inline u16 mute_output(struct snd_soc_component *component,
> +                             u16 mute_mask)
> +{
> +       u16 mute_reg = snd_soc_component_read32(component,
> +                                             SGTL5000_CHIP_ANA_CTRL);
> +
> +       snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
> +                           mute_mask, mute_mask);
> +       return mute_reg;
> +}
> +
> +static inline void restore_output(struct snd_soc_component *component,
> +                                 u16 mute_mask, u16 mute_reg)
> +{
> +       snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_CTRL,
> +               mute_mask, mute_reg);
> +}
> +
> +static void vag_power_on(struct snd_soc_component *component, u32 source)
> +{
> +       if (snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
> +           SGTL5000_VAG_POWERUP)
> +               return;
> +
> +       snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> +                           SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> +
> +       /* When VAG powering on to get local loop from Line-In, the sleep
> +        * is required to avoid loud pop.
> +        */
> +       if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN &&
> +           source == HP_POWER_EVENT)
> +               msleep(SGTL5000_VAG_POWERUP_DELAY);
> +}
> +
> +static int vag_power_consumers(struct snd_soc_component *component,
> +                              u16 ana_pwr_reg, u32 source)
> +{
> +       int consumers = 0;
> +
> +       /* count dac/adc consumers unconditional */
> +       if (ana_pwr_reg & SGTL5000_DAC_POWERUP)
> +               consumers++;
> +       if (ana_pwr_reg & SGTL5000_ADC_POWERUP)
> +               consumers++;
> +
> +       /*
> +        * If the event comes from HP and Line-In is selected,
> +        * current action is 'DAC to be powered down'.
> +        * As HP_POWERUP is not set when HP muxed to line-in,
> +        * we need to keep VAG power ON.
> +        */
> +       if (source == HP_POWER_EVENT) {
> +               if (hp_sel_input(component) == SGTL5000_HP_SEL_LINE_IN)
> +                       consumers++;
> +       } else {
> +               if (ana_pwr_reg & SGTL5000_HP_POWERUP)
> +                       consumers++;
> +       }
> +
> +       return consumers;
> +}
> +
> +static void vag_power_off(struct snd_soc_component *component, u32 source)
> +{
> +       u16 ana_pwr = snd_soc_component_read32(component,
> +                                            SGTL5000_CHIP_ANA_POWER);
> +
> +       if (!(ana_pwr & SGTL5000_VAG_POWERUP))
> +               return;
> +
> +       /*
> +        * This function calls when any of VAG power consumers is disappearing.
> +        * Thus, if there is more than one consumer at the moment, as minimum
> +        * one consumer will definitely stay after the end of the current
> +        * event.
> +        * Don't clear VAG_POWERUP if 2 or more consumers of VAG present:
> +        * - LINE_IN (for HP events) / HP (for DAC/ADC events)
> +        * - DAC
> +        * - ADC
> +        * (the current consumer is disappearing right now)
> +        */
> +       if (vag_power_consumers(component, ana_pwr, source) >= 2)
> +               return;
> +
> +       snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> +               SGTL5000_VAG_POWERUP, 0);
> +       /* In power down case, we need wait 400-1000 ms
> +        * when VAG fully ramped down.
> +        * As longer we wait, as smaller pop we've got.
> +        */
> +       msleep(SGTL5000_VAG_POWERDOWN_DELAY);
> +}
> +
>  /*
>   * mic_bias power on/off share the same register bits with
>   * output impedance of mic bias, when power on mic bias, we
> @@ -170,36 +291,30 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
>         return 0;
>  }
>
> -/*
> - * As manual described, ADC/DAC only works when VAG powerup,
> - * So enabled VAG before ADC/DAC up.
> - * In power down case, we need wait 400ms when vag fully ramped down.
> - */
> -static int power_vag_event(struct snd_soc_dapm_widget *w,
> -       struct snd_kcontrol *kcontrol, int event)
> +static int vag_and_mute_control(struct snd_soc_component *component,
> +                                int event, int event_source)
>  {
> -       struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> -       const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
> +       struct sgtl5000_priv *sgtl5000 =
> +               snd_soc_component_get_drvdata(component);
>
>         switch (event) {
> -       case SND_SOC_DAPM_POST_PMU:
> -               snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> -                       SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
> -               msleep(400);
> +       case SND_SOC_DAPM_PRE_PMU:
> +               sgtl5000->mute_state[event_source] =
> +                       mute_output(component, mute_mask[event_source]);
> +               break;
> +       case SND_SOC_DAPM_POST_PMU:
> +               vag_power_on(component, event_source);
> +               restore_output(component, mute_mask[event_source],
> +                              sgtl5000->mute_state[event_source]);
>                 break;
> -
>         case SND_SOC_DAPM_PRE_PMD:
> -               /*
> -                * Don't clear VAG_POWERUP, when both DAC and ADC are
> -                * operational to prevent inadvertently starving the
> -                * other one of them.
> -                */
> -               if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
> -                               mask) != mask) {
> -                       snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
> -                               SGTL5000_VAG_POWERUP, 0);
> -                       msleep(400);
> -               }
> +               sgtl5000->mute_state[event_source] =
> +                       mute_output(component, mute_mask[event_source]);
> +               vag_power_off(component, event_source);
> +               break;
> +       case SND_SOC_DAPM_POST_PMD:
> +               restore_output(component, mute_mask[event_source],
> +                              sgtl5000->mute_state[event_source]);
>                 break;
>         default:
>                 break;
> @@ -208,6 +323,41 @@ static int power_vag_event(struct snd_soc_dapm_widget *w,
>         return 0;
>  }
>
> +/*
> + * Mute Headphone when power it up/down.
> + * Control VAG power on HP power path.
> + */
> +static int headphone_pga_event(struct snd_soc_dapm_widget *w,
> +       struct snd_kcontrol *kcontrol, int event)
> +{
> +       struct snd_soc_component *component =
> +               snd_soc_dapm_to_component(w->dapm);
> +
> +       return vag_and_mute_control(component, event, HP_POWER_EVENT);
> +}
> +
> +/* As manual describes, ADC/DAC powering up/down requires
> + * to mute outputs to avoid pops.
> + * Control VAG power on ADC/DAC power path.
> + */
> +static int adc_updown_depop(struct snd_soc_dapm_widget *w,
> +       struct snd_kcontrol *kcontrol, int event)
> +{
> +       struct snd_soc_component *component =
> +               snd_soc_dapm_to_component(w->dapm);
> +
> +       return vag_and_mute_control(component, event, ADC_POWER_EVENT);
> +}
> +
> +static int dac_updown_depop(struct snd_soc_dapm_widget *w,
> +       struct snd_kcontrol *kcontrol, int event)
> +{
> +       struct snd_soc_component *component =
> +               snd_soc_dapm_to_component(w->dapm);
> +
> +       return vag_and_mute_control(component, event, DAC_POWER_EVENT);
> +}
> +
>  /* input sources for ADC */
>  static const char *adc_mux_text[] = {
>         "MIC_IN", "LINE_IN"
> @@ -280,7 +430,10 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
>                             mic_bias_event,
>                             SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
>
> -       SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
> +       SND_SOC_DAPM_PGA_E("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0,
> +                          headphone_pga_event,
> +                          SND_SOC_DAPM_PRE_POST_PMU |
> +                          SND_SOC_DAPM_PRE_POST_PMD),
>         SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
>
>         SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
> @@ -301,11 +454,12 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
>                                 0, SGTL5000_CHIP_DIG_POWER,
>                                 1, 0),
>
> -       SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
> -       SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
> -
> -       SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
> -       SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
> +       SND_SOC_DAPM_ADC_E("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0,
> +                          adc_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
> +                          SND_SOC_DAPM_PRE_POST_PMD),
> +       SND_SOC_DAPM_DAC_E("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0,
> +                          dac_updown_depop, SND_SOC_DAPM_PRE_POST_PMU |
> +                          SND_SOC_DAPM_PRE_POST_PMD),
>  };
>
>  /* routes for sgtl5000 */
> --
> 2.20.1
>

Reviewed-by: Igor Opaniuk <igor.opaniuk at toradex.com>

-- 
Best regards - Freundliche Grüsse - Meilleures salutations

Senior Development Engineer,
Igor Opaniuk

Toradex AG
Altsagenstrasse 5 | 6048 Horw/Luzern | Switzerland | T: +41 41 500 48
00 (main line)


More information about the Alsa-devel mailing list