[alsa-devel] [PATCH v2 4/4] ASoC: add imx-audmix DT binding documentation

Rob Herring robh at kernel.org
Wed Jan 16 15:57:53 CET 2019


On Wed, Jan 16, 2019 at 2:22 AM Daniel Baluta <daniel.baluta at gmail.com> wrote:
>
> On Tue, Jan 15, 2019 at 10:58 PM Rob Herring <robh at kernel.org> wrote:
> >
> > On Tue, Jan 08, 2019 at 01:05:51PM +0000, Viorel Suman wrote:
> > > Add the DT binding documentation for Audio Mixer
> > > machine driver.
> > >
> > > Signed-off-by: Viorel Suman <viorel.suman at nxp.com>
> > > ---
> > >  .../devicetree/bindings/sound/imx-audmix.txt       | 24 ++++++++++++++++++++++
> > >  1 file changed, 24 insertions(+)
> > >  create mode 100644 Documentation/devicetree/bindings/sound/imx-audmix.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/sound/imx-audmix.txt b/Documentation/devicetree/bindings/sound/imx-audmix.txt
> > > new file mode 100644
> > > index 0000000..6ac1230
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/sound/imx-audmix.txt
> > > @@ -0,0 +1,24 @@
> > > +NXP Audio Mixer (AUDMIX) machine driver.
> > > +
> > > +Required properties:
> > > +===================================
> > > +  - compatible               : Compatible list, contains "fsl,imx-audmix"
> > > +
> > > +  - model            : Short audio card description.
> > > +
> > > +  - dais             : Must contain a list of phandles to AUDMIX connected
> > > +                       DAIs. The current implementation requires two phandles
> > > +                       to SAI interfaces to be provided, the first SAI in the
> > > +                       list being used to route the AUDMIX output.
> > > +
> > > +  - audmix-controller        : Must contain the phandle to the AUDMIX device node.
> >
> > I don't think you need 2 nodes for this as this one is just a virtual
> > device. Just add the dais property to the audmix node.
>
> Hi Rob,
>
> Thanks for the suggestion. We want to understand better the reasoning
> behind this.
>
> Is it because dais are physically connected to AUDMIX node?
>
> In ALSA we usually add all the components inside the
> associated machine driver virtual node.

Yes, but in those cases, there's a bunch of components (DAIs, DMA,
DSP, amp, codecs, etc.) with no main device. That doesn't really
appear to be the case here (or your example was incomplete).

It's simply that we try to avoid such virtual devices unless
absolutely necessary.

Rob


More information about the Alsa-devel mailing list