[alsa-devel] hp_pin was NULL value

Takashi Iwai tiwai at suse.de
Tue Jan 15 08:53:53 CET 2019


On Tue, 15 Jan 2019 08:43:40 +0100,
Kailang wrote:
> 
> 
> No, it not expected.
> It will enter two times after boot ready.
> I think it could add a flag in alc225_hp_init(). 
> To make sure it only excute one time. How do you think about?

Where was it called, actually?  The call of patch_ops.init is found in
several places: once in snd_hda_codec_build_controls() just before
creating controls (which is the boot time init), and at resume,
alc269_resume().

And, as already explained, we have to call this at resume, because
it's not guaranteed that it's been already called in the case of
hibernation.


thanks,

Takashi

> 
> -----Original Message-----
> From: Takashi Iwai <tiwai at suse.de> 
> Sent: Tuesday, January 15, 2019 2:37 PM
> To: Kailang <kailang at realtek.com>
> Cc: (alsa-devel at alsa-project.org) <alsa-devel at alsa-project.org>
> Subject: Re: hp_pin was NULL value
> 
> On Tue, 15 Jan 2019 03:31:33 +0100,
> Kailang wrote:
> > 
> > Hi Takashi,
> > 
> > Could you receive this email?
> > 
> > BR,
> > Kailang
> > 
> > -----Original Message-----
> > From: Kailang
> > Sent: Thursday, January 10, 2019 11:14 AM
> > To: 'Takashi Iwai' <tiwai at suse.de>
> > Cc: (alsa-devel at alsa-project.org) <alsa-devel at alsa-project.org>
> > Subject: RE: hp_pin was NULL value
> > 
> > Hi Takashi,
> > 
> > I simulate test your prefer function.
> > I put alc225_hp_init() in alc225_init().
> > If system boot ready, I write 1 to power_save of /sys/module/....
> > The print message as below. It called two times until boot ready.
> > If System enter to power save, play stream will wake up codec. It also call alc225_hp_init().
> > 
> > [   21.497524] alc225_init hp_pin=0x21
> > [   21.497526] alc225_hp_init-s hp=0x21
> > [   22.140076] alc225_hp_init-e hp=0x21
> > [   22.183496] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > [   22.184681] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > [   22.186846] alc225_shutup hp_pin=0x21
> > [   22.187831] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
> > [   22.188055] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
> > [   22.205104] alc225_init hp_pin=0x21
> > [   22.205108] alc225_hp_init-s hp=0x21
> > [   22.852123] alc225_hp_init-e hp=0x21
> > [   22.894772] snd_hda_codec_realtek hdaudioC0D2: Headset jack set to unplugged mode.
> > ############  Boot ready ############## [  116.832084] alc225_shutup 
> > hp_pin=0x21  ==> echo 1 to power_save
> > [  120.002582] alc225_init hp_pin=0x21     ==> play system sound
> > [  120.002586] alc225_hp_init-s hp=0x21 [  120.644128] 
> > alc225_hp_init-e hp=0x21
> 
> It wasn't clear to me whether you meant this as a success or a failure...  Did the patch work as expected, no?
> 
> 
> thanks,
> 
> Takashi
> 
> ------Please consider the environment before printing this e-mail.
> 


More information about the Alsa-devel mailing list