[alsa-devel] Pioneer DDJ-SX3 usb audio quirks
ard
ard at kwaak.net
Wed Jan 9 16:58:48 CET 2019
Hi Guys,
I am trying to get my pioneer to work. Everything works except
for the PCM, which seems to be nothing more than an
isosynchronous stream of 12 channels S32_LE output and 10
channels of S32_LE input. (Determined by usbpcap data patterns and mixxx
channel selection).
I tried to make a quirk out of it, but I got puzzled by the
ifnum.
The PCM channels are both endpoints of a single interface, so I
wonder how I should write that down.
This is the lsusb -v:
Bus 001 Device 005: ID 2b73:0023
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x2b73
idProduct 0x0023
bcdDevice 1.02
iManufacturer 1 Pioneer DJ Corporation
iProduct 2 PIONEER DJ DDJ-SX3
iSerial 3 201706
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 137
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 1
bRefresh 0
bSynchAddress 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 1 Audio
bInterfaceSubClass 1 Control Device
bInterfaceProtocol 0
iInterface 0
AudioControl Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 9
bInCollection 1
baInterfaceNr( 0) 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 1 Audio
bInterfaceSubClass 3 MIDI Streaming
bInterfaceProtocol 0
iInterface 0
MIDIStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (HEADER)
bcdADC 1.00
wTotalLength 65
MIDIStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 2 (MIDI_IN_JACK)
bJackType 1 Embedded
bJackID 3
iJack 0
MIDIStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 2 (MIDI_IN_JACK)
bJackType 2 External
bJackID 1
iJack 0
MIDIStreaming Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (MIDI_OUT_JACK)
bJackType 2 External
bJackID 4
bNrInputPins 1
baSourceID( 0) 3
BaSourcePin( 0) 1
iJack 0
MIDIStreaming Interface Descriptor:
bLength 9
bDescriptorType 36
bDescriptorSubtype 3 (MIDI_OUT_JACK)
bJackType 1 Embedded
bJackID 2
bNrInputPins 1
baSourceID( 0) 1
BaSourcePin( 0) 1
iJack 0
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
MIDIStreaming Endpoint Descriptor:
bLength 5
bDescriptorType 37
bDescriptorSubtype 1 (GENERAL)
bNumEmbMIDIJack 1
baAssocJackID( 0) 2
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
bRefresh 0
bSynchAddress 0
MIDIStreaming Endpoint Descriptor:
bLength 5
bDescriptorType 37
bDescriptorSubtype 1 (GENERAL)
bNumEmbMIDIJack 1
baAssocJackID( 0) 3
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x5f70
(Bus Powered)
Debug Mode
And here is my preliminary quirk (yes, I need to remove the octo capture ;-) )
commit 55a009f7e77acf6d75a297e0a01839fdeb580e65
Author: Ard van Breemen <ard at kwaak.net>
Date: Wed Jan 9 15:36:46 2019 +0100
try 1 SX3
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 15cbe2565703..8493dbe536bd 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3324,5 +3324,60 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"),
}
}
},
+{
+ /*
+ * PIONEER DJ DDJ-SX3
+ * PCM is 12 channels out, 10 channels in @ 44.1 fixed
+ * interface 0, vendor class alt setting 1 for endpoints 5 and 0x86
+ */
+ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x0023),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "", */
+ /* .product_name = "OCTO-CAPTURE", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = & (const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 12,
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x05,
+ .ep_attr = 0x05,
+ .rates = SNDRV_PCM_RATE_44100,
+ .rate_min = 44100,
+ .rate_max = 44100,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 44100 }
+ }
+ },
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = & (const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S32_LE,
+ .channels = 10,
+ .iface = 1,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x86,
+ .ep_attr = 0x05,
+ .rates = SNDRV_PCM_RATE_44100,
+ .rate_min = 44100,
+ .rate_max = 44100,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 44100 }
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
#undef USB_DEVICE_VENDOR_SPEC
----
Since this is a copy paste of the roland octo capture with fixes for the numbers I know, I am still wondering about this:
Should I use .ifnum=1 for every snd_usb_audio_quirk?
And in eacht audioformat should I use .iface = 0?
I also wonder what the .altset_idx means.
Regards,
Ard van Breemen
--
.signature not found
More information about the Alsa-devel
mailing list