[alsa-devel] [PATCH V3 1/2] ASoC: fsl_asrc: replace the process_option table with function

S.j. Wang shengjiu.wang at nxp.com
Wed Apr 17 11:06:18 CEST 2019


When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.

We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.

Signed-off-by: Shengjiu Wang <shengjiu.wang at nxp.com>
---
 sound/soc/fsl/fsl_asrc.c | 78 +++++++++++++++++++++++++++++++++++-------------
 1 file changed, 58 insertions(+), 20 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 0b937924d2e4..d34d539d01f2 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -26,24 +26,6 @@
 #define pair_dbg(fmt, ...) \
 	dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
 
-/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][12][2] = {
-	/* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz   64kHz   88.2kHz 96kHz   176kHz  192kHz */
-	{{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 5512Hz */
-	{{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 8kHz */
-	{{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 11025Hz */
-	{{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 16kHz */
-	{{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},},	/* 22050Hz */
-	{{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},},	/* 32kHz */
-	{{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 44.1kHz */
-	{{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},},	/* 48kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},},	/* 64kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 88.2kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},},	/* 96kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 176kHz */
-	{{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},},	/* 192kHz */
-};
-
 /* Corresponding to process_option */
 static int supported_input_rate[] = {
 	5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
@@ -80,6 +62,54 @@
 static unsigned char *clk_map[2];
 
 /**
+ * Select the pre-processing and post-processing options
+ *
+ * inrate: input sample rate
+ * outrate: output sample rate
+ * pre_proc: return value for pre-processing option
+ * post_proc: return value for post-processing option
+ */
+static int fsl_asrc_sel_proc(int inrate, int outrate, int *pre_proc,
+			     int *post_proc)
+{
+	bool post_proc_cond2;
+	bool post_proc_cond0;
+
+	/* Does not support cases: Tsout > 8.125 * Tsin */
+	if (inrate * 8 > 65 * outrate)
+		return -EINVAL;
+
+	/* Otherwise, select pre_proc between [0, 2] */
+	if (inrate * 8 > 33 * outrate)
+		*pre_proc = 2;
+	else if (inrate * 8 > 15 * outrate) {
+		if (inrate > 152000)
+			*pre_proc = 2;
+		else
+			*pre_proc = 1;
+	} else if (inrate < 76000)
+		*pre_proc = 0;
+	else if (inrate > 152000)
+		*pre_proc = 2;
+	else
+		*pre_proc = 1;
+
+	/* Condition for selection of post-processing */
+	post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) ||
+		(inrate > 56000 && outrate < 56000);
+	post_proc_cond0 = inrate * 23 < outrate * 8;
+
+	if (post_proc_cond2)
+		*post_proc = 2;
+	else if (post_proc_cond0)
+		*post_proc = 0;
+	else
+		*post_proc = 1;
+
+	return 0;
+}
+
+/**
  * Request ASRC pair
  *
  * It assigns pair by the order of A->C->B because allocation of pair B,
@@ -239,8 +269,10 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
 	u32 inrate, outrate, indiv, outdiv;
 	u32 clk_index[2], div[2];
 	int in, out, channels;
+	int pre_proc, post_proc;
 	struct clk *clk;
 	bool ideal;
+	int ret;
 
 	if (!config) {
 		pair_err("invalid pair config\n");
@@ -289,6 +321,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
 		return -EINVAL;
 	}
 
+	ret = fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
+	if (ret) {
+		pair_err("No supported pre-processing options\n");
+		return ret;
+	}
+
 	/* Validate input and output clock sources */
 	clk_index[IN] = clk_map[IN][config->inclk];
 	clk_index[OUT] = clk_map[OUT][config->outclk];
@@ -380,8 +418,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
 	/* Apply configurations for pre- and post-processing */
 	regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
 			   ASRCFG_PREMODi_MASK(index) |	ASRCFG_POSTMODi_MASK(index),
-			   ASRCFG_PREMOD(index, process_option[in][out][0]) |
-			   ASRCFG_POSTMOD(index, process_option[in][out][1]));
+			   ASRCFG_PREMOD(index, pre_proc) |
+			   ASRCFG_POSTMOD(index, post_proc));
 
 	return fsl_asrc_set_ideal_ratio(pair, inrate, outrate);
 }
-- 
1.9.1



More information about the Alsa-devel mailing list