[alsa-devel] sound: latency and synchronization measurements

Muni Sekhar munisekharrms at gmail.com
Fri May 18 16:11:06 CEST 2018


On Fri, May 18, 2018 at 6:53 PM, Aris Aris <father.aris at gmail.com> wrote:
> Hi,
>
> You could try bitbanging any availiable peripheral(i.e gpio) from each
> system at the callbacks and have a logic analyzer measuring and reporting
> time delay.
Thank you very much Aris for this information.
I am fairly new to sound sub system, I’m glad if you can point me on
the callbacks.

Does the sound driver will be notified aplay\arecord open via
“snd_xxx_open(struct snd_pcm_substeam *substream)” callback?
Which callbacks of sound driver will tell when it received first and
last audio frames\samples?


>
> Best regards,
>
> Aris
>
> On Fri, May 18, 2018 at 3:37 PM, Muni Sekhar <munisekharrms at gmail.com>
> wrote:
>>
>> [ Please keep me in CC as I'm not subscribed to the list]
>>
>> Hi All,
>>
>> I am trying to characterize the audio synchronization between two
>> systems. There is a mechanism to route audio between two systems, we
>> run ‘aplay’ at one system and ‘arecord’ in other system.
>>
>> We need to measure the time difference when audio sample is out at one
>> port and arriving at another port in different system.
>>
>> I plan to add printk’s in “struct snd_pcm_ops” call backs, but does
>> these call backs tells when it received first and last audio
>> frames\samples?
>>
>> Or else please suggest any other best method.
>>
>>
>> --
>> Thanks,
>> Sekhar
>>
>> _______________________________________________
>> Kernelnewbies mailing list
>> Kernelnewbies at kernelnewbies.org
>> https://lists.kernelnewbies.org/mailman/listinfo/kernelnewbies
>
>



-- 
Thanks,
Sekhar


More information about the Alsa-devel mailing list