[alsa-devel] [PATCH 1/3] sound: usb: line6: Replace mdelay with msleep in line6_read_data

Ladislav Michl ladis at linux-mips.org
Sun Mar 18 16:23:49 CET 2018


On Sun, Mar 18, 2018 at 10:51:33PM +0800, Jia-Ju Bai wrote:
> line6_read_data() is never called in atomic context.
> 
> The call chains ending up at line6_read_data() are:
> [1] line6_read_data() <- line6_read_serial_number() -> pod_startup4()
> [2] line6_read_data() <- line6_read_serial_number() <- 
> 	podhd_startup_workqueue()
> [3] line6_read_data() <- podhd_dev_start() <- podhd_startup_workqueue()
> [4] line6_read_data() <- line6_read_serial_number() <- toneport_init()
> 	<- line6_probe()
> [5] line6_read_data() <- toneport_init() <- line6_probe()
> 
> pod_startup4() and podhd_startup_workqueue() are set in INIT_WORK().
> line6_probe() is called in toneport_probe(), pod_probe(), podhd_probe() 
> and variax_probe(), which are set as ".probe" in usb_driver structure.
> These functions are not called in atomic context.
> 
> Despite never getting called from atomic context, line6_read_data()
> calls mdelay for busy wait.
> That is not necessary and can be replaced with msleep to 
> avoid busy waiting.

Can we have usleep_range here? Please see Documentation/timers/timers-howto.txt
for rationale and range settings.

> This is found by a static analysis tool named DCNS written by myself.

Here I'm assuming you do not have hardware and do not know how it works,
therefore few more people from 'git log --follow sound/usb/line6/driver.c'
were added to Cc list. Hopefully they can clarify the right range value.

Thank you.

> Signed-off-by: Jia-Ju Bai <baijiaju1990 at gmail.com>
> ---
>  sound/usb/line6/driver.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c
> index 0ff5a7d..af99e73 100644
> --- a/sound/usb/line6/driver.c
> +++ b/sound/usb/line6/driver.c
> @@ -356,7 +356,7 @@ int line6_read_data(struct usb_line6 *line6, unsigned address, void *data,
>  
>  	/* Wait for data length. We'll get 0xff until length arrives. */
>  	for (count = 0; count < LINE6_READ_WRITE_MAX_RETRIES; count++) {
> -		mdelay(LINE6_READ_WRITE_STATUS_DELAY);
> +		msleep(LINE6_READ_WRITE_STATUS_DELAY);
>  
>  		ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
>  				      USB_TYPE_VENDOR | USB_RECIP_DEVICE |
> -- 
> 1.9.1
> 
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel


More information about the Alsa-devel mailing list