[alsa-devel] [PATCH] ASoC: soc-pcm: Use delay set in pointer function

Agrawal, Akshu Akshu.Agrawal at amd.com
Sat Jul 28 06:28:00 CEST 2018



On 7/27/2018 8:39 PM, Pierre-Louis Bossart wrote:
> On 7/27/18 5:13 AM, Akshu Agrawal wrote:
>> There are cases where a pointer function populates
>> runtime->delay, such as:
>> ./sound/pci/hda/hda_controller.c
>> ./sound/soc/intel/atom/sst-mfld-platform-pcm.c
>>
>> Also, in some cases cpu dai used is generic and the pcm
>> driver needs to set delay.
>>
>> This delay was getting lost and was overwritten by delays
>> from codec or cpu dai delay function if exposed.
> 
> Humm, yes the runtime->delay set in the .pointer function would be lost 
> without this change, but the delay would still be provided in the 
> followup call to .delay.
> With your change, the same delay will be accounted for twice?
> 

It will not be accounted twice because no driver which is setting
runtime->delay is defining .delay op for cpu_dai. Vice versa is also
true, the drivers which define .delay for cpu_dai don't set
runtime->delay. And I think this is expected from drivers else it would
be a bug from their side.

.delay for codec_dai anyway is different and has to be accounted for.

Thanks,
Akshu
>>
>> Signed-off-by: Akshu Agrawal <akshu.agrawal at amd.com>
>> ---
>>   sound/soc/soc-pcm.c | 5 ++++-
>>   1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
>> index 98be04b..b1a2bc2 100644
>> --- a/sound/soc/soc-pcm.c
>> +++ b/sound/soc/soc-pcm.c
>> @@ -1179,6 +1179,9 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream)
>>   	snd_pcm_sframes_t codec_delay = 0;
>>   	int i;
>>   
>> +	/* clearing the previous delay */
>> +	runtime->delay = 0;
>> +
>>   	for_each_rtdcom(rtd, rtdcom) {
>>   		component = rtdcom->component;
>>   
>> @@ -1203,7 +1206,7 @@ static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream)
>>   	}
>>   	delay += codec_delay;
>>   
>> -	runtime->delay = delay;
>> +	runtime->delay += delay;
>>   
>>   	return offset;
>>   }
>>
> 


More information about the Alsa-devel mailing list