[alsa-devel] [PATCH v2] ASoC: hdac_hdmi: Program pin-port-mux during jack report event

Sriram Periyasamy sriramx.periyasamy at intel.com
Wed Jul 11 08:30:43 CEST 2018


During d3/d0 cycle, the connection selection index of all pins points
to the default value. This needs to be restored to ensure audio is
restored after d3/d0 cycle.

So store the connection selection index and program it during jack
report event which gets invoked in cases like d3/d0 cycle, hot plug
detection when multiple displays are connected.

Signed-off-by: Sriram Periyasamy <sriramx.periyasamy at intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale at intel.com>
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh at intel.com>
---

v1 -> v2:
	- Runtime resume the device explicitly in order to use
	  snd_hdac_codec_write()

 sound/soc/codecs/hdac_hdmi.c | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 84f7a7a36e4b..dd5863830eef 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -83,6 +83,7 @@ struct hdac_hdmi_pin {
 	struct list_head head;
 	hda_nid_t nid;
 	bool mst_capable;
+	int conn_index;
 	struct hdac_hdmi_port *ports;
 	int num_ports;
 	struct hdac_ext_device *edev;
@@ -141,6 +142,9 @@ struct hdac_hdmi_priv {
 
 #define hdev_to_hdmi_priv(_hdev) ((to_ehdac_device(_hdev))->private_data)
 
+static int hdac_hdmi_port_select_set(struct hdac_ext_device *edev,
+					struct hdac_hdmi_port *port);
+
 static struct hdac_hdmi_pcm *
 hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
 			   struct hdac_hdmi_cvt *cvt)
@@ -167,6 +171,30 @@ static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
 
 	if (is_connect) {
 		/*
+		 * Increment the usage count to ensure that the device
+		 * is runtime active to send verb across.
+		 */
+		pm_runtime_get_sync(&edev->hdev.dev);
+
+		/* set the device if pin is mst_capable */
+		if (hdac_hdmi_port_select_set(edev, port) < 0) {
+			dev_err(&edev->hdev.dev,
+				"port %d device select fail\n", port->id);
+			return;
+		}
+
+		/*
+		 * Restore the connection selection index of the
+		 * respective pin.
+		 */
+		if (port->pin->conn_index > 0)
+			snd_hdac_codec_write(&edev->hdev, port->pin->nid,
+						0, AC_VERB_SET_CONNECT_SEL,
+						port->pin->conn_index - 1);
+
+		pm_runtime_put_sync(&edev->hdev.dev);
+
+		/*
 		 * Report Jack connect event when a device is connected
 		 * for the first time where same PCM is attached to multiple
 		 * ports.
@@ -903,6 +931,9 @@ static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol,
 		}
 	}
 
+	if (ucontrol->value.enumerated.item[0] > 0)
+		port->pin->conn_index =	ucontrol->value.enumerated.item[0];
+
 	/*
 	 * Jack status is not reported during device probe as the
 	 * PCMs are not registered by then. So report it here.
-- 
2.7.4



More information about the Alsa-devel mailing list