[alsa-devel] [PATCH 10/11] ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards
Hans de Goede
hdegoede at redhat.com
Tue Feb 20 23:15:10 CET 2018
Despite its name being prefixed with bytcr, before this commit the
bytcr_rt5651 machine driver could not work with Bay Trail CR boards,
as those only have SSP0 and it only supported SSP0-AIF1 setups.
This commit adds support for this, autodetecting AIF1 vs AIF2 based on
BIOS tables.
While at it also add support for SSP2-AIF2 setups, as that requires only
minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support.
Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into
merging the 2 machine drivers into 1 to avoid copy-pasting, but there are
enough subtile differences to make this hard *and* with all the quirks the
machine driver already is full with if (variant-foo) then ... else ...
constructs adding more of these is going to make the code unreadable.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
sound/soc/intel/boards/bytcr_rt5651.c | 225 +++++++++++++++++++++++++++++++---
1 file changed, 206 insertions(+), 19 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
index 9a23ac9172b4..c14c5940ff87 100644
--- a/sound/soc/intel/boards/bytcr_rt5651.c
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -25,6 +25,7 @@
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
#include <asm/platform_sst_audio.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -70,14 +71,16 @@ enum {
#define BYT_RT5651_DMIC_EN BIT(16)
#define BYT_RT5651_MCLK_EN BIT(17)
#define BYT_RT5651_MCLK_25MHZ BIT(18)
+#define BYT_RT5651_SSP2_AIF2 BIT(19) /* default is using AIF1 */
+#define BYT_RT5651_SSP0_AIF1 BIT(20)
+#define BYT_RT5651_SSP0_AIF2 BIT(21)
struct byt_rt5651_private {
struct clk *mclk;
struct snd_soc_jack jack;
};
-static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP |
- BYT_RT5651_MCLK_EN;
+static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN;
static void log_quirks(struct device *dev)
{
@@ -105,9 +108,16 @@ static void log_quirks(struct device *dev)
dev_info(dev, "quirk MCLK_EN enabled");
if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
dev_info(dev, "quirk MCLK_25MHZ enabled");
+ if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2)
+ dev_info(dev, "quirk SSP2_AIF2 enabled\n");
+ if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1)
+ dev_info(dev, "quirk SSP0_AIF1 enabled\n");
+ if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)
+ dev_info(dev, "quirk SSP0_AIF2 enabled\n");
}
#define BYT_CODEC_DAI1 "rt5651-aif1"
+#define BYT_CODEC_DAI2 "rt5651-aif2"
static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai,
int rate)
@@ -116,10 +126,19 @@ static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai,
/* Configure the PLL before selecting it */
if (!(byt_rt5651_quirk & BYT_RT5651_MCLK_EN)) {
- /* 2x25 bit slots on SSP2 */
- ret = snd_soc_dai_set_pll(codec_dai, 0,
- RT5651_PLL1_S_BCLK1,
- rate * 50, rate * 512);
+ /* use bitclock as PLL input */
+ if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) ||
+ (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+ /* 2x16 bit slots on SSP0 */
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5651_PLL1_S_BCLK1,
+ rate * 32, rate * 512);
+ } else {
+ /* 2x25 bit slots on SSP2 */
+ ret = snd_soc_dai_set_pll(codec_dai, 0,
+ RT5651_PLL1_S_BCLK1,
+ rate * 50, rate * 512);
+ }
} else {
if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) {
ret = snd_soc_dai_set_pll(codec_dai, 0,
@@ -157,6 +176,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
int ret;
codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1);
+ if (!codec_dai)
+ codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2);
if (!codec_dai) {
dev_err(card->dev,
"Codec dai not found; Unable to set platform clock\n");
@@ -214,13 +235,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
{"Speaker", NULL, "Platform Clock"},
{"Line In", NULL, "Platform Clock"},
- {"AIF1 Playback", NULL, "ssp2 Tx"},
- {"ssp2 Tx", NULL, "codec_out0"},
- {"ssp2 Tx", NULL, "codec_out1"},
- {"codec_in0", NULL, "ssp2 Rx"},
- {"codec_in1", NULL, "ssp2 Rx"},
- {"ssp2 Rx", NULL, "AIF1 Capture"},
-
{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
{"Headphone", NULL, "HPOL"},
{"Headphone", NULL, "HPOR"},
@@ -268,6 +282,42 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_hs_in3_map[] = {
{"IN3P", NULL, "Headset Mic"},
};
+static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = {
+ {"ssp0 Tx", NULL, "modem_out"},
+ {"modem_in", NULL, "ssp0 Rx"},
+
+ {"AIF1 Playback", NULL, "ssp0 Tx"},
+ {"ssp0 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = {
+ {"ssp0 Tx", NULL, "modem_out"},
+ {"modem_in", NULL, "ssp0 Rx"},
+
+ {"AIF2 Playback", NULL, "ssp0 Tx"},
+ {"ssp0 Rx", NULL, "AIF2 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = {
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx"},
+ {"codec_in1", NULL, "ssp2 Rx"},
+
+ {"AIF1 Playback", NULL, "ssp2 Tx"},
+ {"ssp2 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = {
+ {"ssp2 Tx", NULL, "codec_out0"},
+ {"ssp2 Tx", NULL, "codec_out1"},
+ {"codec_in0", NULL, "ssp2 Rx"},
+ {"codec_in1", NULL, "ssp2 Rx"},
+
+ {"AIF2 Playback", NULL, "ssp2 Tx"},
+ {"ssp2 Rx", NULL, "AIF2 Capture"},
+};
+
static const struct snd_kcontrol_new byt_rt5651_controls[] = {
SOC_DAPM_PIN_SWITCH("Headphone"),
SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -392,6 +442,26 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
if (ret)
return ret;
+ if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ byt_rt5651_ssp2_aif2_map,
+ ARRAY_SIZE(byt_rt5651_ssp2_aif2_map));
+ } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ byt_rt5651_ssp0_aif1_map,
+ ARRAY_SIZE(byt_rt5651_ssp0_aif1_map));
+ } else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ byt_rt5651_ssp0_aif2_map,
+ ARRAY_SIZE(byt_rt5651_ssp0_aif2_map));
+ } else {
+ ret = snd_soc_dapm_add_routes(&card->dapm,
+ byt_rt5651_ssp2_aif1_map,
+ ARRAY_SIZE(byt_rt5651_ssp2_aif1_map));
+ }
+ if (ret)
+ return ret;
+
ret = snd_soc_add_card_controls(card, byt_rt5651_controls,
ARRAY_SIZE(byt_rt5651_controls));
if (ret) {
@@ -464,18 +534,26 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
SNDRV_PCM_HW_PARAM_RATE);
struct snd_interval *channels = hw_param_interval(params,
SNDRV_PCM_HW_PARAM_CHANNELS);
- int ret;
+ int ret, bits;
- /* The DSP will covert the FE rate to 48k, stereo, 24bits */
+ /* The DSP will covert the FE rate to 48k, stereo */
rate->min = rate->max = 48000;
channels->min = channels->max = 2;
- /* set SSP2 to 24-bit */
- params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+ if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) ||
+ (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+ /* set SSP0 to 16-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+ bits = 16;
+ } else {
+ /* set SSP2 to 24-bit */
+ params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+ bits = 24;
+ }
/*
* Default mode for SSP configuration is TDM 4 slot, override config
- * with explicit setting to I2S 2ch 24-bit. The word length is set with
+ * with explicit setting to I2S 2ch. The word length is set with
* dai_set_tdm_slot() since there is no other API exposed
*/
ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
@@ -489,7 +567,7 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
return ret;
}
- ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+ ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
if (ret < 0) {
dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
return ret;
@@ -583,12 +661,32 @@ static struct snd_soc_card byt_rt5651_card = {
};
static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN];
+static char byt_rt5651_codec_aif_name[12]; /* = "rt5651-aif[1|2]" */
+static char byt_rt5651_cpu_dai_name[10]; /* = "ssp[0|2]-port" */
+
+static bool is_valleyview(void)
+{
+ static const struct x86_cpu_id cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+ {}
+ };
+
+ if (!x86_match_cpu(cpu_ids))
+ return false;
+ return true;
+}
+
+struct acpi_chan_package { /* ACPICA seems to require 64 bit integers */
+ u64 aif_value; /* 1: AIF1, 2: AIF2 */
+ u64 mclock_value; /* usually 25MHz (0x17d7940), ignored */
+};
static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
{
struct byt_rt5651_private *priv;
struct snd_soc_acpi_mach *mach;
const char *i2c_name = NULL;
+ bool is_bytcr = false;
int ret_val = 0;
int dai_index = 0;
int i;
@@ -620,10 +718,99 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name;
}
+ /*
+ * swap SSP0 if bytcr is detected
+ * (will be overridden if DMI quirk is detected)
+ */
+ if (is_valleyview()) {
+ struct sst_platform_info *p_info = mach->pdata;
+ const struct sst_res_info *res_info = p_info->res_info;
+
+ if (res_info->acpi_ipc_irq_index == 0)
+ is_bytcr = true;
+ }
+
+ if (is_bytcr) {
+ /*
+ * Baytrail CR platforms may have CHAN package in BIOS, try
+ * to find relevant routing quirk based as done on Windows
+ * platforms. We have to read the information directly from the
+ * BIOS, at this stage the card is not created and the links
+ * with the codec driver/pdata are non-existent
+ */
+
+ struct acpi_chan_package chan_package;
+
+ /* format specified: 2 64-bit integers */
+ struct acpi_buffer format = {sizeof("NN"), "NN"};
+ struct acpi_buffer state = {0, NULL};
+ struct snd_soc_acpi_package_context pkg_ctx;
+ bool pkg_found = false;
+
+ state.length = sizeof(chan_package);
+ state.pointer = &chan_package;
+
+ pkg_ctx.name = "CHAN";
+ pkg_ctx.length = 2;
+ pkg_ctx.format = &format;
+ pkg_ctx.state = &state;
+ pkg_ctx.data_valid = false;
+
+ pkg_found = snd_soc_acpi_find_package_from_hid(mach->id,
+ &pkg_ctx);
+ if (pkg_found) {
+ if (chan_package.aif_value == 1) {
+ dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
+ byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1;
+ } else if (chan_package.aif_value == 2) {
+ dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
+ byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
+ } else {
+ dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
+ pkg_found = false;
+ }
+ }
+
+ if (!pkg_found) {
+ /* no BIOS indications, assume SSP0-AIF2 connection */
+ byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
+ }
+
+ /* change defaults for Baytrail-CR capture */
+ byt_rt5651_quirk |= BYT_RT5651_JD1_1 |
+ BYT_RT5651_OVTH_2000UA |
+ BYT_RT5651_OVCD_SF_0P75 |
+ BYT_RT5651_IN2_HS_IN3_MAP;
+ } else {
+ byt_rt5651_quirk |= BYT_RT5651_DMIC_MAP;
+ }
+
/* check quirks before creating card */
dmi_check_system(byt_rt5651_quirk_table);
log_quirks(&pdev->dev);
+ if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
+ (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+ /* fixup codec aif name */
+ snprintf(byt_rt5651_codec_aif_name,
+ sizeof(byt_rt5651_codec_aif_name),
+ "%s", "rt5651-aif2");
+
+ byt_rt5651_dais[dai_index].codec_dai_name =
+ byt_rt5651_codec_aif_name;
+ }
+
+ if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) ||
+ (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+ /* fixup cpu dai name name */
+ snprintf(byt_rt5651_cpu_dai_name,
+ sizeof(byt_rt5651_cpu_dai_name),
+ "%s", "ssp0-port");
+
+ byt_rt5651_dais[dai_index].cpu_dai_name =
+ byt_rt5651_cpu_dai_name;
+ }
+
if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
if (IS_ERR(priv->mclk)) {
--
2.14.3
More information about the Alsa-devel
mailing list