[alsa-devel] [PATCH v13 7/8] ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx
Hans Verkuil
hverkuil at xs4all.nl
Thu Feb 15 19:36:43 CET 2018
On 15/02/18 18:55, Tim Harvey wrote:
> The GW54xx has a front-panel microHDMI connector routed to a TDA19971
> which is connected the the IPU CSI when using IMX6Q.
I assume that this and the next patch go through another subsystem for arm
and/or imx?
Regards,
Hans
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
> v5:
> - remove leading 0 from unit address
> - add newline between property list and child node
>
> v4: no changes
> v3: no changes
>
> v2:
> - add HDMI audio input support
>
> arch/arm/boot/dts/imx6q-gw54xx.dts | 105 ++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +++++++++-
> 2 files changed, 131 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
> index 56e5b50..0477120 100644
> --- a/arch/arm/boot/dts/imx6q-gw54xx.dts
> +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
> @@ -12,10 +12,30 @@
> /dts-v1/;
> #include "imx6q.dtsi"
> #include "imx6qdl-gw54xx.dtsi"
> +#include <dt-bindings/media/tda1997x.h>
>
> / {
> model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
> compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
> +
> + sound-digital {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "tda1997x-audio";
> +
> + simple-audio-card,dai-link at 0 {
> + format = "i2s";
> +
> + cpu {
> + sound-dai = <&ssi2>;
> + };
> +
> + codec {
> + bitclock-master;
> + frame-master;
> + sound-dai = <&tda1997x>;
> + };
> + };
> + };
> };
>
> &i2c3 {
> @@ -35,6 +55,61 @@
> };
> };
> };
> +
> + tda1997x: codec at 48 {
> + compatible = "nxp,tda19971";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_tda1997x>;
> + reg = <0x48>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + DOVDD-supply = <®_3p3v>;
> + AVDD-supply = <&sw4_reg>;
> + DVDD-supply = <&sw4_reg>;
> + #sound-dai-cells = <0>;
> + nxp,audout-format = "i2s";
> + nxp,audout-layout = <0>;
> + nxp,audout-width = <16>;
> + nxp,audout-mclk-fs = <128>;
> + /*
> + * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
> + * and Y[11:4] across 16bits in the same cycle
> + * which we map to VP[15:08]<->CSI_DATA[19:12]
> + */
> + nxp,vidout-portcfg =
> + /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
> + < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
> + /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
> + < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
> + /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
> + < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
> + /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
> + < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
> +
> + port {
> + tda1997x_to_ipu1_csi0_mux: endpoint {
> + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
> + bus-width = <16>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + data-active = <1>;
> + };
> + };
> + };
> +};
> +
> +&ipu1_csi0_from_ipu1_csi0_mux {
> + bus-width = <16>;
> +};
> +
> +&ipu1_csi0_mux_from_parallel_sensor {
> + remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
> + bus-width = <16>;
> +};
> +
> +&ipu1_csi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ipu1_csi0>;
> };
>
> &ipu2_csi1_from_ipu2_csi1_mux {
> @@ -63,6 +138,30 @@
> >;
> };
>
> + pinctrl_ipu1_csi0: ipu1_csi0grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
> + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
> + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
> + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
> + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
> + >;
> + };
> +
> pinctrl_ipu2_csi1: ipu2_csi1grp {
> fsl,pins = <
> MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19 0x1b0b0
> @@ -78,4 +177,10 @@
> MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK 0x1b0b0
> >;
> };
> +
> + pinctrl_tda1997x: tda1997xgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
> + >;
> + };
> };
> diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> index eab75f3..f9e1fb9 100644
> --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
> @@ -10,6 +10,7 @@
> */
>
> #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
>
> / {
> /* these are used by bootloader for disabling nodes */
> @@ -114,12 +115,12 @@
> };
> };
>
> - sound {
> + sound-analog {
> compatible = "fsl,imx6q-ventana-sgtl5000",
> "fsl,imx-audio-sgtl5000";
> model = "sgtl5000-audio";
> ssi-controller = <&ssi1>;
> - audio-codec = <&codec>;
> + audio-codec = <&sgtl5000>;
> audio-routing =
> "MIC_IN", "Mic Jack",
> "Mic Jack", "Mic Bias",
> @@ -133,6 +134,25 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
> status = "okay";
> +
> + ssi2 {
> + fsl,audmux-port = <1>;
> + fsl,port-config = <
> + (IMX_AUDMUX_V2_PTCR_TFSDIR |
> + IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
> + IMX_AUDMUX_V2_PTCR_TCLKDIR |
> + IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
> + IMX_AUDMUX_V2_PTCR_SYN)
> + IMX_AUDMUX_V2_PDCR_RXDSEL(4)
> + >;
> + };
> +
> + aud5 {
> + fsl,audmux-port = <4>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN
> + IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
> + };
> };
>
> &can1 {
> @@ -331,7 +351,7 @@
> pinctrl-0 = <&pinctrl_i2c3>;
> status = "okay";
>
> - codec: sgtl5000 at a {
> + sgtl5000: codec at a {
> compatible = "fsl,sgtl5000";
> reg = <0x0a>;
> clocks = <&clks IMX6QDL_CLK_CKO>;
> @@ -475,6 +495,9 @@
> MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
> MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
> MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
> + MX6QDL_PAD_EIM_D25__AUD5_RXC 0x130b0
> + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
> + MX6QDL_PAD_EIM_D24__AUD5_RXFS 0x130b0
> >;
> };
>
>
More information about the Alsa-devel
mailing list