[alsa-devel] [PATCH v2 08/13] ALSA: dice: use cache of stream format to check running stream

Takashi Sakamoto o-takashi at sakamocchi.jp
Sun Apr 29 08:50:27 CEST 2018


At present, to check running stream, available stream formats are used
at current sampling transmission frequency (stf). But when changing stf,
it's convenient to use cache of stream formats.

This commit applies this idea.

Signed-off-by: Takashi Sakamoto <o-takashi at sakamocchi.jp>
---
 sound/firewire/dice/dice-stream.c | 50 ++++++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 19 deletions(-)

diff --git a/sound/firewire/dice/dice-stream.c b/sound/firewire/dice/dice-stream.c
index da0607832456..b81e98c238c7 100644
--- a/sound/firewire/dice/dice-stream.c
+++ b/sound/firewire/dice/dice-stream.c
@@ -284,16 +284,14 @@ int snd_dice_stream_start_duplex(struct snd_dice *dice, unsigned int rate)
 	unsigned int curr_rate;
 	unsigned int i;
 	struct reg_params tx_params, rx_params;
-	bool need_to_start;
+	bool need_to_start = false;
+	unsigned int mode;
 	int err;
 
 	if (dice->substreams_counter == 0)
 		return -EIO;
 
-	err = get_register_params(dice, &tx_params, &rx_params);
-	if (err < 0)
-		return err;
-
+	/* Check sampling transmission frequency. */
 	err = snd_dice_transaction_get_rate(dice, &curr_rate);
 	if (err < 0) {
 		dev_err(&dice->unit->device,
@@ -305,22 +303,36 @@ int snd_dice_stream_start_duplex(struct snd_dice *dice, unsigned int rate)
 	if (rate != curr_rate)
 		return -EINVAL;
 
-	/* Judge to need to restart streams. */
-	for (i = 0; i < MAX_STREAMS; i++) {
-		if (i < tx_params.count) {
-			if (amdtp_streaming_error(&dice->tx_stream[i]) ||
-			    !amdtp_stream_running(&dice->tx_stream[i]))
-				break;
-		}
-		if (i < rx_params.count) {
-			if (amdtp_streaming_error(&dice->rx_stream[i]) ||
-			    !amdtp_stream_running(&dice->rx_stream[i]))
-				break;
-		}
+	/* Check error of packet streaming. */
+	for (i = 0; i < MAX_STREAMS; ++i) {
+		if (amdtp_streaming_error(&dice->tx_stream[i]))
+			break;
+		if (amdtp_streaming_error(&dice->rx_stream[i]))
+			break;
+	}
+	if (i < MAX_STREAMS)
+		need_to_start = true;
+
+	/* Check required streams are running or not. */
+	err = snd_dice_stream_get_rate_mode(dice, rate, &mode);
+	if (err < 0)
+		return err;
+	for (i = 0; i < MAX_STREAMS; ++i) {
+		if (dice->tx_pcm_chs[i][mode] > 0 &&
+		    !amdtp_stream_running(&dice->tx_stream[i]))
+			break;
+		if (dice->rx_pcm_chs[i][mode] > 0 &&
+		    !amdtp_stream_running(&dice->rx_stream[i]))
+			break;
 	}
-	need_to_start = (i < MAX_STREAMS);
+	if (i < MAX_STREAMS)
+		need_to_start = true;
 
 	if (need_to_start) {
+		err = get_register_params(dice, &tx_params, &rx_params);
+		if (err < 0)
+			return err;
+
 		/* Stop transmission. */
 		snd_dice_transaction_clear_enable(dice);
 		stop_streams(dice, AMDTP_IN_STREAM, &tx_params);
@@ -331,7 +343,7 @@ int snd_dice_stream_start_duplex(struct snd_dice *dice, unsigned int rate)
 		if (err < 0) {
 			dev_err(&dice->unit->device,
 				"fail to ensure phase lock\n");
-			return err;
+			goto error;
 		}
 
 		/* Start both streams. */
-- 
2.14.1



More information about the Alsa-devel mailing list