[alsa-devel] [PATCH 1/3] ASoC: tas6424: Allow disabling auto diagnostics for faster power-on

[Mark Brown]

On Fri, Apr 20, 2018 at 12:04:42PM +0200, Jean-Jacques Hiblot wrote:
> The TAS6424 incorporates both DC-load and AC-load diagnostics which are
> used to determine the status of the load. The DC diagnostics runs when any
> channel is directed to leave the Hi-Z state and enter the MUTE or PLAY
> state.
> The DC diagnostics are turned on by default but if a fast startup without
> diagnostics is required the DC diagnostics can be bypassed by adding the
> property "disable-auto-diagnostics".

This is making me think we should be smarter here and either only run
the diagnostics once during boot or provide a user control for the
diagnostics.  It seems like something that is more of a runtime software
decision than something that's fixed in hardware design, is there
anything about the hardware design that'd make it impossible to run
diagnostics?

> +	if (tas6424->no_auto_diags) {
> +		/*
> +		 * Disable DC auto-diagnostics to save time when channel leave
> +		 * Hi-Z state
> +		 */
> +		ret = regmap_update_bits(tas6424->regmap,
> +					 TAS6424_DC_DIAG_CTRL1,
> +					  0xff, TAS6424_LDGBYPASS);

This could just be exposed to userspace as a simple switch control
couldn't it?  I do note that it masks more bits than it sets though...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20180423/08f7300c/attachment.sig>