[alsa-devel] call/normal switch was Re: omap4-droid4: voice call support was

[Tony Lindgren]

* Pavel Machek <pavel at ucw.cz> [180403 15:51]:
> Hi!
> 
> > > OK thanks for checking. So probably only n_gsm channel 1 is for normal
> > > Qualcomm at commands, and then channel 2 and others are commands
> > > implemented by Motorola on the mdm6600.
> > > 
> > > I guess we'd have to add support for reading and writing to
> > > /dev/gsmtty2 at least as it looks like these cannot be accessed
> > > via /dev/ttyUSB4. Or at least I have not figured out any other
> > > way to access them.
> > 
> > Hmm or maybe there is some way to select where qmi to tunnels the
> > AT commands to? Some kind of channel type paramenter like n_gsm
> > has?
> > 
> > Anyways, for trying to figure out things for alsamixer, I tested
> > that ngsm 2 "AT+EACC=3,0" is not related to cpcap audio register
> > settings and the mic is enabled during the call with Pavel's patch
> > with alsamixer "Mode" set to either "Call" or "Normal". Also speaker
> > keeps working during the call toggling between "Call" and "Normal".
> > "Voice" in alsamixer does also control the speaker volume during
> > the call. And setting the second "Speaker" from "Voice" to "HiFi"
> > mutes the speaker.
> 
> Take a look at the patch. Selecting "call" does something at hardware
> level, selecting "normal" is a nop.
> 
> Sorry for confusion.
> 
> Yes, that patch needs more work.

OK that explains why the speaker keeps working then :)

Regards,

Tony