[alsa-devel] Applied "ALSA: ac97: split out the generic ac97 registers" to the asoc tree

Mark Brown broonie at kernel.org
Mon Sep 4 19:25:40 CEST 2017


The patch

   ALSA: ac97: split out the generic ac97 registers

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 8e4f7d9b8c652b4eb3ceb790e1e9fe433f9e3b58 Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik at free.fr>
Date: Sat, 2 Sep 2017 21:54:03 +0200
Subject: [PATCH] ALSA: ac97: split out the generic ac97 registers

Split out from the ac97_codec.h the ac97 generic registers, which can be
used by a codec, typically a generic ac97 codec, and by the ac97 bus, to
scan an ac97 AC-Link.

This split encompasses all the AC97 standard registers, but not the
codec specific ones.

In order to have a clean split between former ac97 bus implementation
and the new coming one in sound/ac97, it is safer to not include any
former ac97 includes, excepting in sound/ac97/compat.c.

Amongst the thing to isolate :
 - don't have the struct snd_ac97 in sound/ac97/* (except compat.c) to not
   be "fooled" by a definition which would come with ac97_codec.h by
   "chance".
 - don't have to have snd_a97_*() functions, as they rely on struct
   snd_ac97.
  - don't want the struct snd_ac97_bus_ops, there is a new one

Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
Reviewed-by: Takashi Iwai <tiwai at suse.de>
Signed-off-by: Mark Brown <broonie at kernel.org>
---
 include/sound/ac97/regs.h  | 262 +++++++++++++++++++++++++++++++++++++++++++++
 include/sound/ac97_codec.h | 239 +----------------------------------------
 2 files changed, 263 insertions(+), 238 deletions(-)
 create mode 100644 include/sound/ac97/regs.h

diff --git a/include/sound/ac97/regs.h b/include/sound/ac97/regs.h
new file mode 100644
index 000000000000..4bb86d379bd5
--- /dev/null
+++ b/include/sound/ac97/regs.h
@@ -0,0 +1,262 @@
+/*
+ *  Copyright (c) by Jaroslav Kysela <perex at perex.cz>
+ *  Universal interface for Audio Codec '97
+ *
+ *  For more details look to AC '97 component specification revision 2.1
+ *  by Intel Corporation (http://developer.intel.com).
+ *
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+/*
+ *  AC'97 codec registers
+ */
+
+#define AC97_RESET		0x00	/* Reset */
+#define AC97_MASTER		0x02	/* Master Volume */
+#define AC97_HEADPHONE		0x04	/* Headphone Volume (optional) */
+#define AC97_MASTER_MONO	0x06	/* Master Volume Mono (optional) */
+#define AC97_MASTER_TONE	0x08	/* Master Tone (Bass & Treble) (optional) */
+#define AC97_PC_BEEP		0x0a	/* PC Beep Volume (optinal) */
+#define AC97_PHONE		0x0c	/* Phone Volume (optional) */
+#define AC97_MIC		0x0e	/* MIC Volume */
+#define AC97_LINE		0x10	/* Line In Volume */
+#define AC97_CD			0x12	/* CD Volume */
+#define AC97_VIDEO		0x14	/* Video Volume (optional) */
+#define AC97_AUX		0x16	/* AUX Volume (optional) */
+#define AC97_PCM		0x18	/* PCM Volume */
+#define AC97_REC_SEL		0x1a	/* Record Select */
+#define AC97_REC_GAIN		0x1c	/* Record Gain */
+#define AC97_REC_GAIN_MIC	0x1e	/* Record Gain MIC (optional) */
+#define AC97_GENERAL_PURPOSE	0x20	/* General Purpose (optional) */
+#define AC97_3D_CONTROL		0x22	/* 3D Control (optional) */
+#define AC97_INT_PAGING		0x24	/* Audio Interrupt & Paging (AC'97 2.3) */
+#define AC97_POWERDOWN		0x26	/* Powerdown control / status */
+/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
+#define AC97_EXTENDED_ID	0x28	/* Extended Audio ID */
+#define AC97_EXTENDED_STATUS	0x2a	/* Extended Audio Status and Control */
+#define AC97_PCM_FRONT_DAC_RATE 0x2c	/* PCM Front DAC Rate */
+#define AC97_PCM_SURR_DAC_RATE	0x2e	/* PCM Surround DAC Rate */
+#define AC97_PCM_LFE_DAC_RATE	0x30	/* PCM LFE DAC Rate */
+#define AC97_PCM_LR_ADC_RATE	0x32	/* PCM LR ADC Rate */
+#define AC97_PCM_MIC_ADC_RATE	0x34	/* PCM MIC ADC Rate */
+#define AC97_CENTER_LFE_MASTER	0x36	/* Center + LFE Master Volume */
+#define AC97_SURROUND_MASTER	0x38	/* Surround (Rear) Master Volume */
+#define AC97_SPDIF		0x3a	/* S/PDIF control */
+/* range 0x3c-0x58 - MODEM */
+#define AC97_EXTENDED_MID	0x3c	/* Extended Modem ID */
+#define AC97_EXTENDED_MSTATUS	0x3e	/* Extended Modem Status and Control */
+#define AC97_LINE1_RATE		0x40	/* Line1 DAC/ADC Rate */
+#define AC97_LINE2_RATE		0x42	/* Line2 DAC/ADC Rate */
+#define AC97_HANDSET_RATE	0x44	/* Handset DAC/ADC Rate */
+#define AC97_LINE1_LEVEL	0x46	/* Line1 DAC/ADC Level */
+#define AC97_LINE2_LEVEL	0x48	/* Line2 DAC/ADC Level */
+#define AC97_HANDSET_LEVEL	0x4a	/* Handset DAC/ADC Level */
+#define AC97_GPIO_CFG		0x4c	/* GPIO Configuration */
+#define AC97_GPIO_POLARITY	0x4e	/* GPIO Pin Polarity/Type, 0=low, 1=high active */
+#define AC97_GPIO_STICKY	0x50	/* GPIO Pin Sticky, 0=not, 1=sticky */
+#define AC97_GPIO_WAKEUP	0x52	/* GPIO Pin Wakeup, 0=no int, 1=yes int */
+#define AC97_GPIO_STATUS	0x54	/* GPIO Pin Status, slot 12 */
+#define AC97_MISC_AFE		0x56	/* Miscellaneous Modem AFE Status and Control */
+/* range 0x5a-0x7b - Vendor Specific */
+#define AC97_VENDOR_ID1		0x7c	/* Vendor ID1 */
+#define AC97_VENDOR_ID2		0x7e	/* Vendor ID2 / revision */
+/* range 0x60-0x6f (page 1) - extended codec registers */
+#define AC97_CODEC_CLASS_REV	0x60	/* Codec Class/Revision */
+#define AC97_PCI_SVID		0x62	/* PCI Subsystem Vendor ID */
+#define AC97_PCI_SID		0x64	/* PCI Subsystem ID */
+#define AC97_FUNC_SELECT	0x66	/* Function Select */
+#define AC97_FUNC_INFO		0x68	/* Function Information */
+#define AC97_SENSE_INFO		0x6a	/* Sense Details */
+
+/* volume controls */
+#define AC97_MUTE_MASK_MONO	0x8000
+#define AC97_MUTE_MASK_STEREO	0x8080
+
+/* slot allocation */
+#define AC97_SLOT_TAG		0
+#define AC97_SLOT_CMD_ADDR	1
+#define AC97_SLOT_CMD_DATA	2
+#define AC97_SLOT_PCM_LEFT	3
+#define AC97_SLOT_PCM_RIGHT	4
+#define AC97_SLOT_MODEM_LINE1	5
+#define AC97_SLOT_PCM_CENTER	6
+#define AC97_SLOT_MIC		6	/* input */
+#define AC97_SLOT_SPDIF_LEFT1	6
+#define AC97_SLOT_PCM_SLEFT	7	/* surround left */
+#define AC97_SLOT_PCM_LEFT_0	7	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT	7
+#define AC97_SLOT_PCM_SRIGHT	8	/* surround right */
+#define AC97_SLOT_PCM_RIGHT_0	8	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT	8
+#define AC97_SLOT_LFE		9
+#define AC97_SLOT_SPDIF_RIGHT1	9
+#define AC97_SLOT_MODEM_LINE2	10
+#define AC97_SLOT_PCM_LEFT_1	10	/* double rate operation */
+#define AC97_SLOT_SPDIF_LEFT2	10
+#define AC97_SLOT_HANDSET	11	/* output */
+#define AC97_SLOT_PCM_RIGHT_1	11	/* double rate operation */
+#define AC97_SLOT_SPDIF_RIGHT2	11
+#define AC97_SLOT_MODEM_GPIO	12	/* modem GPIO */
+#define AC97_SLOT_PCM_CENTER_1	12	/* double rate operation */
+
+/* basic capabilities (reset register) */
+#define AC97_BC_DEDICATED_MIC	0x0001	/* Dedicated Mic PCM In Channel */
+#define AC97_BC_RESERVED1	0x0002	/* Reserved (was Modem Line Codec support) */
+#define AC97_BC_BASS_TREBLE	0x0004	/* Bass & Treble Control */
+#define AC97_BC_SIM_STEREO	0x0008	/* Simulated stereo */
+#define AC97_BC_HEADPHONE	0x0010	/* Headphone Out Support */
+#define AC97_BC_LOUDNESS	0x0020	/* Loudness (bass boost) Support */
+#define AC97_BC_16BIT_DAC	0x0000	/* 16-bit DAC resolution */
+#define AC97_BC_18BIT_DAC	0x0040	/* 18-bit DAC resolution */
+#define AC97_BC_20BIT_DAC	0x0080	/* 20-bit DAC resolution */
+#define AC97_BC_DAC_MASK	0x00c0
+#define AC97_BC_16BIT_ADC	0x0000	/* 16-bit ADC resolution */
+#define AC97_BC_18BIT_ADC	0x0100	/* 18-bit ADC resolution */
+#define AC97_BC_20BIT_ADC	0x0200	/* 20-bit ADC resolution */
+#define AC97_BC_ADC_MASK	0x0300
+#define AC97_BC_3D_TECH_ID_MASK	0x7c00	/* Per-vendor ID of 3D enhancement */
+
+/* general purpose */
+#define AC97_GP_DRSS_MASK	0x0c00	/* double rate slot select */
+#define AC97_GP_DRSS_1011	0x0000	/* LR(C) 10+11(+12) */
+#define AC97_GP_DRSS_78		0x0400	/* LR 7+8 */
+
+/* powerdown bits */
+#define AC97_PD_ADC_STATUS	0x0001	/* ADC status (RO) */
+#define AC97_PD_DAC_STATUS	0x0002	/* DAC status (RO) */
+#define AC97_PD_MIXER_STATUS	0x0004	/* Analog mixer status (RO) */
+#define AC97_PD_VREF_STATUS	0x0008	/* Vref status (RO) */
+#define AC97_PD_PR0		0x0100	/* Power down PCM ADCs and input MUX */
+#define AC97_PD_PR1		0x0200	/* Power down PCM front DAC */
+#define AC97_PD_PR2		0x0400	/* Power down Mixer (Vref still on) */
+#define AC97_PD_PR3		0x0800	/* Power down Mixer (Vref off) */
+#define AC97_PD_PR4		0x1000	/* Power down AC-Link */
+#define AC97_PD_PR5		0x2000	/* Disable internal clock usage */
+#define AC97_PD_PR6		0x4000	/* Headphone amplifier */
+#define AC97_PD_EAPD		0x8000	/* External Amplifer Power Down (EAPD) */
+
+/* extended audio ID bit defines */
+#define AC97_EI_VRA		0x0001	/* Variable bit rate supported */
+#define AC97_EI_DRA		0x0002	/* Double rate supported */
+#define AC97_EI_SPDIF		0x0004	/* S/PDIF out supported */
+#define AC97_EI_VRM		0x0008	/* Variable bit rate supported for MIC */
+#define AC97_EI_DACS_SLOT_MASK	0x0030	/* DACs slot assignment */
+#define AC97_EI_DACS_SLOT_SHIFT	4
+#define AC97_EI_CDAC		0x0040	/* PCM Center DAC available */
+#define AC97_EI_SDAC		0x0080	/* PCM Surround DACs available */
+#define AC97_EI_LDAC		0x0100	/* PCM LFE DAC available */
+#define AC97_EI_AMAP		0x0200	/* indicates optional slot/DAC mapping based on codec ID */
+#define AC97_EI_REV_MASK	0x0c00	/* AC'97 revision mask */
+#define AC97_EI_REV_22		0x0400	/* AC'97 revision 2.2 */
+#define AC97_EI_REV_23		0x0800	/* AC'97 revision 2.3 */
+#define AC97_EI_REV_SHIFT	10
+#define AC97_EI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_EI_ADDR_SHIFT	14
+
+/* extended audio status and control bit defines */
+#define AC97_EA_VRA		0x0001	/* Variable bit rate enable bit */
+#define AC97_EA_DRA		0x0002	/* Double-rate audio enable bit */
+#define AC97_EA_SPDIF		0x0004	/* S/PDIF out enable bit */
+#define AC97_EA_VRM		0x0008	/* Variable bit rate for MIC enable bit */
+#define AC97_EA_SPSA_SLOT_MASK	0x0030	/* Mask for slot assignment bits */
+#define AC97_EA_SPSA_SLOT_SHIFT 4
+#define AC97_EA_SPSA_3_4	0x0000	/* Slot assigned to 3 & 4 */
+#define AC97_EA_SPSA_7_8	0x0010	/* Slot assigned to 7 & 8 */
+#define AC97_EA_SPSA_6_9	0x0020	/* Slot assigned to 6 & 9 */
+#define AC97_EA_SPSA_10_11	0x0030	/* Slot assigned to 10 & 11 */
+#define AC97_EA_CDAC		0x0040	/* PCM Center DAC is ready (Read only) */
+#define AC97_EA_SDAC		0x0080	/* PCM Surround DACs are ready (Read only) */
+#define AC97_EA_LDAC		0x0100	/* PCM LFE DAC is ready (Read only) */
+#define AC97_EA_MDAC		0x0200	/* MIC ADC is ready (Read only) */
+#define AC97_EA_SPCV		0x0400	/* S/PDIF configuration valid (Read only) */
+#define AC97_EA_PRI		0x0800	/* Turns the PCM Center DAC off */
+#define AC97_EA_PRJ		0x1000	/* Turns the PCM Surround DACs off */
+#define AC97_EA_PRK		0x2000	/* Turns the PCM LFE DAC off */
+#define AC97_EA_PRL		0x4000	/* Turns the MIC ADC off */
+
+/* S/PDIF control bit defines */
+#define AC97_SC_PRO		0x0001	/* Professional status */
+#define AC97_SC_NAUDIO		0x0002	/* Non audio stream */
+#define AC97_SC_COPY		0x0004	/* Copyright status */
+#define AC97_SC_PRE		0x0008	/* Preemphasis status */
+#define AC97_SC_CC_MASK		0x07f0	/* Category Code mask */
+#define AC97_SC_CC_SHIFT	4
+#define AC97_SC_L		0x0800	/* Generation Level status */
+#define AC97_SC_SPSR_MASK	0x3000	/* S/PDIF Sample Rate bits */
+#define AC97_SC_SPSR_SHIFT	12
+#define AC97_SC_SPSR_44K	0x0000	/* Use 44.1kHz Sample rate */
+#define AC97_SC_SPSR_48K	0x2000	/* Use 48kHz Sample rate */
+#define AC97_SC_SPSR_32K	0x3000	/* Use 32kHz Sample rate */
+#define AC97_SC_DRS		0x4000	/* Double Rate S/PDIF */
+#define AC97_SC_V		0x8000	/* Validity status */
+
+/* Interrupt and Paging bit defines (AC'97 2.3) */
+#define AC97_PAGE_MASK		0x000f	/* Page Selector */
+#define AC97_PAGE_VENDOR	0	/* Vendor-specific registers */
+#define AC97_PAGE_1		1	/* Extended Codec Registers page 1 */
+#define AC97_INT_ENABLE		0x0800	/* Interrupt Enable */
+#define AC97_INT_SENSE		0x1000	/* Sense Cycle */
+#define AC97_INT_CAUSE_SENSE	0x2000	/* Sense Cycle Completed (RO) */
+#define AC97_INT_CAUSE_GPIO	0x4000	/* GPIO bits changed (RO) */
+#define AC97_INT_STATUS		0x8000	/* Interrupt Status */
+
+/* extended modem ID bit defines */
+#define AC97_MEI_LINE1		0x0001	/* Line1 present */
+#define AC97_MEI_LINE2		0x0002	/* Line2 present */
+#define AC97_MEI_HANDSET	0x0004	/* Handset present */
+#define AC97_MEI_CID1		0x0008	/* caller ID decode for Line1 is supported */
+#define AC97_MEI_CID2		0x0010	/* caller ID decode for Line2 is supported */
+#define AC97_MEI_ADDR_MASK	0xc000	/* physical codec ID (address) */
+#define AC97_MEI_ADDR_SHIFT	14
+
+/* extended modem status and control bit defines */
+#define AC97_MEA_GPIO		0x0001	/* GPIO is ready (ro) */
+#define AC97_MEA_MREF		0x0002	/* Vref is up to nominal level (ro) */
+#define AC97_MEA_ADC1		0x0004	/* ADC1 operational (ro) */
+#define AC97_MEA_DAC1		0x0008	/* DAC1 operational (ro) */
+#define AC97_MEA_ADC2		0x0010	/* ADC2 operational (ro) */
+#define AC97_MEA_DAC2		0x0020	/* DAC2 operational (ro) */
+#define AC97_MEA_HADC		0x0040	/* HADC operational (ro) */
+#define AC97_MEA_HDAC		0x0080	/* HDAC operational (ro) */
+#define AC97_MEA_PRA		0x0100	/* GPIO power down (high) */
+#define AC97_MEA_PRB		0x0200	/* reserved */
+#define AC97_MEA_PRC		0x0400	/* ADC1 power down (high) */
+#define AC97_MEA_PRD		0x0800	/* DAC1 power down (high) */
+#define AC97_MEA_PRE		0x1000	/* ADC2 power down (high) */
+#define AC97_MEA_PRF		0x2000	/* DAC2 power down (high) */
+#define AC97_MEA_PRG		0x4000	/* HADC power down (high) */
+#define AC97_MEA_PRH		0x8000	/* HDAC power down (high) */
+
+/* modem gpio status defines */
+#define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
+#define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
+#define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
+#define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
+#define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
+#define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
+#define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
+#define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
+#define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
+#define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
+#define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
+#define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
+#define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
+#define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
+#define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
+#define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */
+
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 15aa5f07c955..89d311a503d3 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -28,6 +28,7 @@
 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/workqueue.h>
+#include <sound/ac97/regs.h>
 #include <sound/pcm.h>
 #include <sound/control.h>
 #include <sound/info.h>
@@ -35,244 +36,6 @@
 /* maximum number of devices on the AC97 bus */
 #define	AC97_BUS_MAX_DEVICES	4
 
-/*
- *  AC'97 codec registers
- */
-
-#define AC97_RESET		0x00	/* Reset */
-#define AC97_MASTER		0x02	/* Master Volume */
-#define AC97_HEADPHONE		0x04	/* Headphone Volume (optional) */
-#define AC97_MASTER_MONO	0x06	/* Master Volume Mono (optional) */
-#define AC97_MASTER_TONE	0x08	/* Master Tone (Bass & Treble) (optional) */
-#define AC97_PC_BEEP		0x0a	/* PC Beep Volume (optinal) */
-#define AC97_PHONE		0x0c	/* Phone Volume (optional) */
-#define AC97_MIC		0x0e	/* MIC Volume */
-#define AC97_LINE		0x10	/* Line In Volume */
-#define AC97_CD			0x12	/* CD Volume */
-#define AC97_VIDEO		0x14	/* Video Volume (optional) */
-#define AC97_AUX		0x16	/* AUX Volume (optional) */
-#define AC97_PCM		0x18	/* PCM Volume */
-#define AC97_REC_SEL		0x1a	/* Record Select */
-#define AC97_REC_GAIN		0x1c	/* Record Gain */
-#define AC97_REC_GAIN_MIC	0x1e	/* Record Gain MIC (optional) */
-#define AC97_GENERAL_PURPOSE	0x20	/* General Purpose (optional) */
-#define AC97_3D_CONTROL		0x22	/* 3D Control (optional) */
-#define AC97_INT_PAGING		0x24	/* Audio Interrupt & Paging (AC'97 2.3) */
-#define AC97_POWERDOWN		0x26	/* Powerdown control / status */
-/* range 0x28-0x3a - AUDIO AC'97 2.0 extensions */
-#define AC97_EXTENDED_ID	0x28	/* Extended Audio ID */
-#define AC97_EXTENDED_STATUS	0x2a	/* Extended Audio Status and Control */
-#define AC97_PCM_FRONT_DAC_RATE 0x2c	/* PCM Front DAC Rate */
-#define AC97_PCM_SURR_DAC_RATE	0x2e	/* PCM Surround DAC Rate */
-#define AC97_PCM_LFE_DAC_RATE	0x30	/* PCM LFE DAC Rate */
-#define AC97_PCM_LR_ADC_RATE	0x32	/* PCM LR ADC Rate */
-#define AC97_PCM_MIC_ADC_RATE	0x34	/* PCM MIC ADC Rate */
-#define AC97_CENTER_LFE_MASTER	0x36	/* Center + LFE Master Volume */
-#define AC97_SURROUND_MASTER	0x38	/* Surround (Rear) Master Volume */
-#define AC97_SPDIF		0x3a	/* S/PDIF control */
-/* range 0x3c-0x58 - MODEM */
-#define AC97_EXTENDED_MID	0x3c	/* Extended Modem ID */
-#define AC97_EXTENDED_MSTATUS	0x3e	/* Extended Modem Status and Control */
-#define AC97_LINE1_RATE		0x40	/* Line1 DAC/ADC Rate */
-#define AC97_LINE2_RATE		0x42	/* Line2 DAC/ADC Rate */
-#define AC97_HANDSET_RATE	0x44	/* Handset DAC/ADC Rate */
-#define AC97_LINE1_LEVEL	0x46	/* Line1 DAC/ADC Level */
-#define AC97_LINE2_LEVEL	0x48	/* Line2 DAC/ADC Level */
-#define AC97_HANDSET_LEVEL	0x4a	/* Handset DAC/ADC Level */
-#define AC97_GPIO_CFG		0x4c	/* GPIO Configuration */
-#define AC97_GPIO_POLARITY	0x4e	/* GPIO Pin Polarity/Type, 0=low, 1=high active */
-#define AC97_GPIO_STICKY	0x50	/* GPIO Pin Sticky, 0=not, 1=sticky */
-#define AC97_GPIO_WAKEUP	0x52	/* GPIO Pin Wakeup, 0=no int, 1=yes int */
-#define AC97_GPIO_STATUS	0x54	/* GPIO Pin Status, slot 12 */
-#define AC97_MISC_AFE		0x56	/* Miscellaneous Modem AFE Status and Control */
-/* range 0x5a-0x7b - Vendor Specific */
-#define AC97_VENDOR_ID1		0x7c	/* Vendor ID1 */
-#define AC97_VENDOR_ID2		0x7e	/* Vendor ID2 / revision */
-/* range 0x60-0x6f (page 1) - extended codec registers */
-#define AC97_CODEC_CLASS_REV	0x60	/* Codec Class/Revision */
-#define AC97_PCI_SVID		0x62	/* PCI Subsystem Vendor ID */
-#define AC97_PCI_SID		0x64	/* PCI Subsystem ID */
-#define AC97_FUNC_SELECT	0x66	/* Function Select */
-#define AC97_FUNC_INFO		0x68	/* Function Information */
-#define AC97_SENSE_INFO		0x6a	/* Sense Details */
-
-/* volume controls */
-#define AC97_MUTE_MASK_MONO	0x8000
-#define AC97_MUTE_MASK_STEREO	0x8080
-
-/* slot allocation */
-#define AC97_SLOT_TAG		0
-#define AC97_SLOT_CMD_ADDR	1
-#define AC97_SLOT_CMD_DATA	2
-#define AC97_SLOT_PCM_LEFT	3
-#define AC97_SLOT_PCM_RIGHT	4
-#define AC97_SLOT_MODEM_LINE1	5
-#define AC97_SLOT_PCM_CENTER	6
-#define AC97_SLOT_MIC		6	/* input */
-#define AC97_SLOT_SPDIF_LEFT1	6
-#define AC97_SLOT_PCM_SLEFT	7	/* surround left */
-#define AC97_SLOT_PCM_LEFT_0	7	/* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT	7
-#define AC97_SLOT_PCM_SRIGHT	8	/* surround right */
-#define AC97_SLOT_PCM_RIGHT_0	8	/* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT	8
-#define AC97_SLOT_LFE		9
-#define AC97_SLOT_SPDIF_RIGHT1	9
-#define AC97_SLOT_MODEM_LINE2	10
-#define AC97_SLOT_PCM_LEFT_1	10	/* double rate operation */
-#define AC97_SLOT_SPDIF_LEFT2	10
-#define AC97_SLOT_HANDSET	11	/* output */
-#define AC97_SLOT_PCM_RIGHT_1	11	/* double rate operation */
-#define AC97_SLOT_SPDIF_RIGHT2	11
-#define AC97_SLOT_MODEM_GPIO	12	/* modem GPIO */
-#define AC97_SLOT_PCM_CENTER_1	12	/* double rate operation */
-
-/* basic capabilities (reset register) */
-#define AC97_BC_DEDICATED_MIC	0x0001	/* Dedicated Mic PCM In Channel */
-#define AC97_BC_RESERVED1	0x0002	/* Reserved (was Modem Line Codec support) */
-#define AC97_BC_BASS_TREBLE	0x0004	/* Bass & Treble Control */
-#define AC97_BC_SIM_STEREO	0x0008	/* Simulated stereo */
-#define AC97_BC_HEADPHONE	0x0010	/* Headphone Out Support */
-#define AC97_BC_LOUDNESS	0x0020	/* Loudness (bass boost) Support */
-#define AC97_BC_16BIT_DAC	0x0000	/* 16-bit DAC resolution */
-#define AC97_BC_18BIT_DAC	0x0040	/* 18-bit DAC resolution */
-#define AC97_BC_20BIT_DAC	0x0080	/* 20-bit DAC resolution */
-#define AC97_BC_DAC_MASK	0x00c0
-#define AC97_BC_16BIT_ADC	0x0000	/* 16-bit ADC resolution */
-#define AC97_BC_18BIT_ADC	0x0100	/* 18-bit ADC resolution */
-#define AC97_BC_20BIT_ADC	0x0200	/* 20-bit ADC resolution */
-#define AC97_BC_ADC_MASK	0x0300
-#define AC97_BC_3D_TECH_ID_MASK	0x7c00	/* Per-vendor ID of 3D enhancement */
-
-/* general purpose */
-#define AC97_GP_DRSS_MASK	0x0c00	/* double rate slot select */
-#define AC97_GP_DRSS_1011	0x0000	/* LR(C) 10+11(+12) */
-#define AC97_GP_DRSS_78		0x0400	/* LR 7+8 */
-
-/* powerdown bits */
-#define AC97_PD_ADC_STATUS	0x0001	/* ADC status (RO) */
-#define AC97_PD_DAC_STATUS	0x0002	/* DAC status (RO) */
-#define AC97_PD_MIXER_STATUS	0x0004	/* Analog mixer status (RO) */
-#define AC97_PD_VREF_STATUS	0x0008	/* Vref status (RO) */
-#define AC97_PD_PR0		0x0100	/* Power down PCM ADCs and input MUX */
-#define AC97_PD_PR1		0x0200	/* Power down PCM front DAC */
-#define AC97_PD_PR2		0x0400	/* Power down Mixer (Vref still on) */
-#define AC97_PD_PR3		0x0800	/* Power down Mixer (Vref off) */
-#define AC97_PD_PR4		0x1000	/* Power down AC-Link */
-#define AC97_PD_PR5		0x2000	/* Disable internal clock usage */
-#define AC97_PD_PR6		0x4000	/* Headphone amplifier */
-#define AC97_PD_EAPD		0x8000	/* External Amplifer Power Down (EAPD) */
-
-/* extended audio ID bit defines */
-#define AC97_EI_VRA		0x0001	/* Variable bit rate supported */
-#define AC97_EI_DRA		0x0002	/* Double rate supported */
-#define AC97_EI_SPDIF		0x0004	/* S/PDIF out supported */
-#define AC97_EI_VRM		0x0008	/* Variable bit rate supported for MIC */
-#define AC97_EI_DACS_SLOT_MASK	0x0030	/* DACs slot assignment */
-#define AC97_EI_DACS_SLOT_SHIFT	4
-#define AC97_EI_CDAC		0x0040	/* PCM Center DAC available */
-#define AC97_EI_SDAC		0x0080	/* PCM Surround DACs available */
-#define AC97_EI_LDAC		0x0100	/* PCM LFE DAC available */
-#define AC97_EI_AMAP		0x0200	/* indicates optional slot/DAC mapping based on codec ID */
-#define AC97_EI_REV_MASK	0x0c00	/* AC'97 revision mask */
-#define AC97_EI_REV_22		0x0400	/* AC'97 revision 2.2 */
-#define AC97_EI_REV_23		0x0800	/* AC'97 revision 2.3 */
-#define AC97_EI_REV_SHIFT	10
-#define AC97_EI_ADDR_MASK	0xc000	/* physical codec ID (address) */
-#define AC97_EI_ADDR_SHIFT	14
-
-/* extended audio status and control bit defines */
-#define AC97_EA_VRA		0x0001	/* Variable bit rate enable bit */
-#define AC97_EA_DRA		0x0002	/* Double-rate audio enable bit */
-#define AC97_EA_SPDIF		0x0004	/* S/PDIF out enable bit */
-#define AC97_EA_VRM		0x0008	/* Variable bit rate for MIC enable bit */
-#define AC97_EA_SPSA_SLOT_MASK	0x0030	/* Mask for slot assignment bits */
-#define AC97_EA_SPSA_SLOT_SHIFT 4
-#define AC97_EA_SPSA_3_4	0x0000	/* Slot assigned to 3 & 4 */
-#define AC97_EA_SPSA_7_8	0x0010	/* Slot assigned to 7 & 8 */
-#define AC97_EA_SPSA_6_9	0x0020	/* Slot assigned to 6 & 9 */
-#define AC97_EA_SPSA_10_11	0x0030	/* Slot assigned to 10 & 11 */
-#define AC97_EA_CDAC		0x0040	/* PCM Center DAC is ready (Read only) */
-#define AC97_EA_SDAC		0x0080	/* PCM Surround DACs are ready (Read only) */
-#define AC97_EA_LDAC		0x0100	/* PCM LFE DAC is ready (Read only) */
-#define AC97_EA_MDAC		0x0200	/* MIC ADC is ready (Read only) */
-#define AC97_EA_SPCV		0x0400	/* S/PDIF configuration valid (Read only) */
-#define AC97_EA_PRI		0x0800	/* Turns the PCM Center DAC off */
-#define AC97_EA_PRJ		0x1000	/* Turns the PCM Surround DACs off */
-#define AC97_EA_PRK		0x2000	/* Turns the PCM LFE DAC off */
-#define AC97_EA_PRL		0x4000	/* Turns the MIC ADC off */
-
-/* S/PDIF control bit defines */
-#define AC97_SC_PRO		0x0001	/* Professional status */
-#define AC97_SC_NAUDIO		0x0002	/* Non audio stream */
-#define AC97_SC_COPY		0x0004	/* Copyright status */
-#define AC97_SC_PRE		0x0008	/* Preemphasis status */
-#define AC97_SC_CC_MASK		0x07f0	/* Category Code mask */
-#define AC97_SC_CC_SHIFT	4
-#define AC97_SC_L		0x0800	/* Generation Level status */
-#define AC97_SC_SPSR_MASK	0x3000	/* S/PDIF Sample Rate bits */
-#define AC97_SC_SPSR_SHIFT	12
-#define AC97_SC_SPSR_44K	0x0000	/* Use 44.1kHz Sample rate */
-#define AC97_SC_SPSR_48K	0x2000	/* Use 48kHz Sample rate */
-#define AC97_SC_SPSR_32K	0x3000	/* Use 32kHz Sample rate */
-#define AC97_SC_DRS		0x4000	/* Double Rate S/PDIF */
-#define AC97_SC_V		0x8000	/* Validity status */
-
-/* Interrupt and Paging bit defines (AC'97 2.3) */
-#define AC97_PAGE_MASK		0x000f	/* Page Selector */
-#define AC97_PAGE_VENDOR	0	/* Vendor-specific registers */
-#define AC97_PAGE_1		1	/* Extended Codec Registers page 1 */
-#define AC97_INT_ENABLE		0x0800	/* Interrupt Enable */
-#define AC97_INT_SENSE		0x1000	/* Sense Cycle */
-#define AC97_INT_CAUSE_SENSE	0x2000	/* Sense Cycle Completed (RO) */
-#define AC97_INT_CAUSE_GPIO	0x4000	/* GPIO bits changed (RO) */
-#define AC97_INT_STATUS		0x8000	/* Interrupt Status */
-
-/* extended modem ID bit defines */
-#define AC97_MEI_LINE1		0x0001	/* Line1 present */
-#define AC97_MEI_LINE2		0x0002	/* Line2 present */
-#define AC97_MEI_HANDSET	0x0004	/* Handset present */
-#define AC97_MEI_CID1		0x0008	/* caller ID decode for Line1 is supported */
-#define AC97_MEI_CID2		0x0010	/* caller ID decode for Line2 is supported */
-#define AC97_MEI_ADDR_MASK	0xc000	/* physical codec ID (address) */
-#define AC97_MEI_ADDR_SHIFT	14
-
-/* extended modem status and control bit defines */
-#define AC97_MEA_GPIO		0x0001	/* GPIO is ready (ro) */
-#define AC97_MEA_MREF		0x0002	/* Vref is up to nominal level (ro) */
-#define AC97_MEA_ADC1		0x0004	/* ADC1 operational (ro) */
-#define AC97_MEA_DAC1		0x0008	/* DAC1 operational (ro) */
-#define AC97_MEA_ADC2		0x0010	/* ADC2 operational (ro) */
-#define AC97_MEA_DAC2		0x0020	/* DAC2 operational (ro) */
-#define AC97_MEA_HADC		0x0040	/* HADC operational (ro) */
-#define AC97_MEA_HDAC		0x0080	/* HDAC operational (ro) */
-#define AC97_MEA_PRA		0x0100	/* GPIO power down (high) */
-#define AC97_MEA_PRB		0x0200	/* reserved */
-#define AC97_MEA_PRC		0x0400	/* ADC1 power down (high) */
-#define AC97_MEA_PRD		0x0800	/* DAC1 power down (high) */
-#define AC97_MEA_PRE		0x1000	/* ADC2 power down (high) */
-#define AC97_MEA_PRF		0x2000	/* DAC2 power down (high) */
-#define AC97_MEA_PRG		0x4000	/* HADC power down (high) */
-#define AC97_MEA_PRH		0x8000	/* HDAC power down (high) */
-
-/* modem gpio status defines */
-#define AC97_GPIO_LINE1_OH      0x0001  /* Off Hook Line1 */
-#define AC97_GPIO_LINE1_RI      0x0002  /* Ring Detect Line1 */
-#define AC97_GPIO_LINE1_CID     0x0004  /* Caller ID path enable Line1 */
-#define AC97_GPIO_LINE1_LCS     0x0008  /* Loop Current Sense Line1 */
-#define AC97_GPIO_LINE1_PULSE   0x0010  /* Opt./ Pulse Dial Line1 (out) */
-#define AC97_GPIO_LINE1_HL1R    0x0020  /* Opt./ Handset to Line1 relay control (out) */
-#define AC97_GPIO_LINE1_HOHD    0x0040  /* Opt./ Handset off hook detect Line1 (in) */
-#define AC97_GPIO_LINE12_AC     0x0080  /* Opt./ Int.bit 1 / Line1/2 AC (out) */
-#define AC97_GPIO_LINE12_DC     0x0100  /* Opt./ Int.bit 2 / Line1/2 DC (out) */
-#define AC97_GPIO_LINE12_RS     0x0200  /* Opt./ Int.bit 3 / Line1/2 RS (out) */
-#define AC97_GPIO_LINE2_OH      0x0400  /* Off Hook Line2 */
-#define AC97_GPIO_LINE2_RI      0x0800  /* Ring Detect Line2 */
-#define AC97_GPIO_LINE2_CID     0x1000  /* Caller ID path enable Line2 */
-#define AC97_GPIO_LINE2_LCS     0x2000  /* Loop Current Sense Line2 */
-#define AC97_GPIO_LINE2_PULSE   0x4000  /* Opt./ Pulse Dial Line2 (out) */
-#define AC97_GPIO_LINE2_HL1R    0x8000  /* Opt./ Handset to Line2 relay control (out) */
-
 /* specific - SigmaTel */
 #define AC97_SIGMATEL_OUTSEL	0x64	/* Output Select, STAC9758 */
 #define AC97_SIGMATEL_INSEL	0x66	/* Input Select, STAC9758 */
-- 
2.14.1



More information about the Alsa-devel mailing list