[alsa-devel] [PATCH v7 12/13] slimbus: qcom: Add runtime-pm support using clock-pause

[Srinivas Kandagatla]

Thanks for the review,

On 23/11/17 10:17, Charles Keepax wrote:
> On Wed, Nov 15, 2017 at 02:10:42PM +0000, srinivas.kandagatla at linaro.org wrote:
>> From: Sagar Dharia <sdharia at codeaurora.org>
>>
>> Slimbus HW mandates that clock-pause sequence has to be executed
>> before disabling relevant interface and core clocks.
>> Runtime-PM's autosuspend feature is used here to enter/exit low
>> power mode for Qualcomm's Slimbus controller. Autosuspend feature
>> enables driver to avoid changing power-modes too frequently since
>> entering clock-pause is an expensive sequence
>>
>> Signed-off-by: Sagar Dharia <sdharia at codeaurora.org>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> ---
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int qcom_slim_suspend(struct device *dev)
>> +{
>> +	int ret = 0;
>> +
>> +	if (!pm_runtime_enabled(dev) ||
>> +		(!pm_runtime_suspended(dev))) {
>> +		dev_dbg(dev, "system suspend");
>> +		ret = qcom_slim_runtime_suspend(dev);
>> +	}
>> +
>> +	/*
>> +	 * If the clock pause failed due to active channels, there is
>> +	 * a possibility that some audio stream is active during suspend.
>> +	 * (e.g. modem usecase during suspend)
>> +	 * We dont want to return suspend failure in that case so that
>> +	 * display and relevant components can still go to suspend.
>> +	 * If there is some other error, then it should prevent
>> +	 * system level suspend
>> +	 */
>> +	if (ret == -EISCONN)
>> +		ret = 0;
> 
> Who actually returns the EISCONN for this to catch? Or will that
> be added to slim_ctrl_clk_pause once support for the audio
> channels is added?

This looks like a leftover code, I will remove it in next version and we 
can add it once related code is added.



> 
> Thanks,
> Charles
> 
>> +
>> +	return ret;
>> +}