[alsa-devel] [PATCH 1/3] ASoC: rt5663: Update the calibration funciton
Oder Chiou
oder_chiou at realtek.com
Fri Jul 7 10:58:57 CEST 2017
The patch updates the calibration funciton for getting the correct DC
offset of headphone output.
Signed-off-by: Oder Chiou <oder_chiou at realtek.com>
---
sound/soc/codecs/rt5663.c | 100 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 79 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index a33202a..18b3b52 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -2986,47 +2986,75 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
{
int value, count;
- regmap_write(rt5663->regmap, RT5663_RC_CLK, 0x0280);
+ regmap_write(rt5663->regmap, RT5663_RESET, 0x0000);
+ msleep(20);
+ regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_4, 0x00a1);
+ regmap_write(rt5663->regmap, RT5663_RC_CLK, 0x0380);
regmap_write(rt5663->regmap, RT5663_GLB_CLK, 0x8000);
- regmap_write(rt5663->regmap, RT5663_DIG_MISC, 0x8001);
+ regmap_write(rt5663->regmap, RT5663_ADDA_CLK_1, 0x1000);
regmap_write(rt5663->regmap, RT5663_VREF_RECMIX, 0x0032);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xa2be);
- msleep(20);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xf2be);
- regmap_write(rt5663->regmap, RT5663_PWR_DIG_2, 0x8400);
- regmap_write(rt5663->regmap, RT5663_CHOP_ADC, 0x3000);
- regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x003b);
- regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x8df8);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x0003);
- regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x018c);
- regmap_write(rt5663->regmap, RT5663_ADDA_CLK_1, 0x1111);
+ regmap_write(rt5663->regmap, RT5663_HP_IMP_SEN_19, 0x000c);
+ regmap_write(rt5663->regmap, RT5663_DUMMY_1, 0x0324);
+ regmap_write(rt5663->regmap, RT5663_DIG_MISC, 0x8001);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xa23b);
+ msleep(30);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0xf23b);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x8000);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x0008);
regmap_write(rt5663->regmap, RT5663_PRE_DIV_GATING_1, 0xffff);
regmap_write(rt5663->regmap, RT5663_PRE_DIV_GATING_2, 0xffff);
+ regmap_write(rt5663->regmap, RT5663_CBJ_1, 0x8c10);
+ regmap_write(rt5663->regmap, RT5663_IL_CMD_2, 0x00c1);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_1, 0xb880);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_2, 0x4110);
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_2, 0x4118);
+
+ count = 0;
+ while (true) {
+ regmap_read(rt5663->regmap, RT5663_INT_ST_2, &value);
+ if (!(value & 0x80))
+ usleep_range(10000, 10005);
+ else
+ break;
+
+ if (count > 200)
+ break;
+ }
+
+ regmap_write(rt5663->regmap, RT5663_HP_IMP_SEN_19, 0x0000);
regmap_write(rt5663->regmap, RT5663_DEPOP_2, 0x3003);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x0038);
regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x003b);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_2, 0x8400);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x8df8);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x8003);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_3, 0x018c);
regmap_write(rt5663->regmap, RT5663_HP_CHARGE_PUMP_1, 0x1e32);
- regmap_write(rt5663->regmap, RT5663_HP_CHARGE_PUMP_2, 0x1371);
regmap_write(rt5663->regmap, RT5663_DACREF_LDO, 0x3b0b);
- regmap_write(rt5663->regmap, RT5663_STO_DAC_MIXER, 0x2080);
+ regmap_write(rt5663->regmap, RT5663_STO_DAC_MIXER, 0x0000);
regmap_write(rt5663->regmap, RT5663_BYPASS_STO_DAC, 0x000c);
- regmap_write(rt5663->regmap, RT5663_HP_BIAS, 0xabba);
+ regmap_write(rt5663->regmap, RT5663_HP_BIAS, 0xafaa);
regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_1, 0x2224);
regmap_write(rt5663->regmap, RT5663_HP_OUT_EN, 0x8088);
regmap_write(rt5663->regmap, RT5663_STO_DRE_9, 0x0017);
regmap_write(rt5663->regmap, RT5663_STO_DRE_10, 0x0017);
regmap_write(rt5663->regmap, RT5663_STO1_ADC_MIXER, 0x4040);
+ regmap_write(rt5663->regmap, RT5663_CHOP_ADC, 0x3000);
regmap_write(rt5663->regmap, RT5663_RECMIX, 0x0005);
regmap_write(rt5663->regmap, RT5663_ADDA_RST, 0xc000);
regmap_write(rt5663->regmap, RT5663_STO1_HPF_ADJ1, 0x3320);
regmap_write(rt5663->regmap, RT5663_HP_CALIB_2, 0x00c9);
regmap_write(rt5663->regmap, RT5663_DUMMY_1, 0x004c);
- regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_1, 0x7766);
- regmap_write(rt5663->regmap, RT5663_BIAS_CUR_8, 0x4702);
- msleep(200);
+ regmap_write(rt5663->regmap, RT5663_ANA_BIAS_CUR_1, 0x1111);
+ regmap_write(rt5663->regmap, RT5663_BIAS_CUR_8, 0x4402);
+ regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_2, 0x3311);
regmap_write(rt5663->regmap, RT5663_HP_CALIB_1, 0x0069);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_3, 0x06c2);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x7b00);
- regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xfb00);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_3, 0x06ce);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x6800);
+ regmap_write(rt5663->regmap, RT5663_CHARGE_PUMP_2, 0x1100);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_7, 0x0057);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xe800);
+
count = 0;
while (true) {
regmap_read(rt5663->regmap, RT5663_HP_CALIB_1_1, &value);
@@ -3039,6 +3067,36 @@ static void rt5663_calibrate(struct rt5663_priv *rt5663)
return;
count++;
}
+
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0x6200);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_7, 0x0059);
+ regmap_write(rt5663->regmap, RT5663_HP_CALIB_1_1, 0xe200);
+
+ count = 0;
+ while (true) {
+ regmap_read(rt5663->regmap, RT5663_HP_CALIB_1_1, &value);
+ if (value & 0x8000)
+ usleep_range(10000, 10005);
+ else
+ break;
+
+ if (count > 200)
+ return;
+ count++;
+ }
+
+ regmap_write(rt5663->regmap, RT5663_EM_JACK_TYPE_1, 0xb8e0);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_1, 0x003b);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_DIG_1, 0x0000);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x000b);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_DEPOP_1, 0x0008);
+ usleep_range(10000, 10005);
+ regmap_write(rt5663->regmap, RT5663_PWR_ANLG_2, 0x0000);
+ usleep_range(10000, 10005);
}
static int rt5663_i2c_probe(struct i2c_client *i2c,
--
2.7.4
More information about the Alsa-devel
mailing list