[alsa-devel] [PATCH v3 04/10] clk: sunxi-ng: add support for Allwinner H5 SoC

Maxime Ripard maxime.ripard at free-electrons.com
Mon Jan 30 10:04:22 CET 2017


On Sun, Jan 29, 2017 at 10:33:25AM +0800, Icenowy Zheng wrote:
> Allwinner H5 is a SoC that features a CCU like H3, but with MMC phase
> clocks removed (for new MMC controller) and a new bus gate/reset
> imported.
> 
> Add support for it.
> 
> Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
> ---
> See the comments of the previous patch.
> 
>  .../devicetree/bindings/clock/sunxi-ccu.txt        |   1 +
>  drivers/clk/sunxi-ng/Kconfig                       |   2 +-
>  drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c             | 137 +++++++++++++++++++++
>  drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.h             |   5 +-
>  include/dt-bindings/clock/sunxi-h3-h5-ccu.h        |   3 +
>  include/dt-bindings/reset/sunxi-h3-h5-ccu.h        |   3 +
>  6 files changed, 149 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> index f6032cf63f12..a33a4a5ecffa 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt
> @@ -9,6 +9,7 @@ Required properties :
>  		- "allwinner,sun8i-h3-ccu"
>  		- "allwinner,sun8i-v3s-ccu"
>  		- "allwinner,sun50i-a64-ccu"
> +		- "allwinner,sun50i-h5-ccu"
>  
>  - reg: Must contain the registers base address and length
>  - clocks: phandle to the oscillators feeding the CCU. Two are needed:
> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> index 4be083ae717f..bdf18e846731 100644
> --- a/drivers/clk/sunxi-ng/Kconfig
> +++ b/drivers/clk/sunxi-ng/Kconfig
> @@ -117,7 +117,7 @@ config SUNXI_H3_H5_CCU
>  	select SUNXI_CCU_NM
>  	select SUNXI_CCU_MP
>  	select SUNXI_CCU_PHASE
> -	default MACH_SUN8I
> +	default MACH_SUN8I || (ARM64 && ARCH_SUNXI)
>  
>  config SUN8I_V3S_CCU
>  	bool "Support for the Allwinner V3s CCU"
> diff --git a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> index be63b56315f5..b7b9f85f5c9f 100644
> --- a/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> +++ b/drivers/clk/sunxi-ng/ccu-sunxi-h3-h5.c
> @@ -302,6 +302,8 @@ static SUNXI_CCU_GATE(bus_uart3_clk,	"bus-uart3",	"apb2",
>  		      0x06c, BIT(19), 0);
>  static SUNXI_CCU_GATE(bus_scr0_clk,	"bus-scr0",	"apb2",
>  		      0x06c, BIT(20), 0);
> +static SUNXI_CCU_GATE(bus_scr1_clk,	"bus-scr1",	"apb2",
> +		      0x06c, BIT(21), 0);
>  
>  static SUNXI_CCU_GATE(bus_ephy_clk,	"bus-ephy",	"ahb1",
>  		      0x070, BIT(0), 0);
> @@ -547,6 +549,7 @@ static struct ccu_common *sunxi_h3_h5_ccu_clks[] = {
>  	&bus_uart2_clk.common,
>  	&bus_uart3_clk.common,
>  	&bus_scr0_clk.common,
> +	&bus_scr1_clk.common,
>  	&bus_ephy_clk.common,
>  	&bus_dbg_clk.common,
>  	&ths_clk.common,
> @@ -730,6 +733,122 @@ static struct clk_hw_onecell_data sun8i_h3_hw_clks = {
>  	.num	= CLK_NUMBER,
>  };
>  
> +static struct clk_hw_onecell_data sun50i_h5_hw_clks = {
> +	.hws	= {
> +		[CLK_PLL_CPUX]		= &pll_cpux_clk.common.hw,
> +		[CLK_PLL_AUDIO_BASE]	= &pll_audio_base_clk.common.hw,
> +		[CLK_PLL_AUDIO]		= &pll_audio_clk.hw,
> +		[CLK_PLL_AUDIO_2X]	= &pll_audio_2x_clk.hw,
> +		[CLK_PLL_AUDIO_4X]	= &pll_audio_4x_clk.hw,
> +		[CLK_PLL_AUDIO_8X]	= &pll_audio_8x_clk.hw,
> +		[CLK_PLL_VIDEO]		= &pll_video_clk.common.hw,
> +		[CLK_PLL_VE]		= &pll_ve_clk.common.hw,
> +		[CLK_PLL_DDR]		= &pll_ddr_clk.common.hw,
> +		[CLK_PLL_PERIPH0]	= &pll_periph0_clk.common.hw,
> +		[CLK_PLL_PERIPH0_2X]	= &pll_periph0_2x_clk.hw,
> +		[CLK_PLL_GPU]		= &pll_gpu_clk.common.hw,
> +		[CLK_PLL_PERIPH1]	= &pll_periph1_clk.common.hw,
> +		[CLK_PLL_DE]		= &pll_de_clk.common.hw,
> +		[CLK_CPUX]		= &cpux_clk.common.hw,
> +		[CLK_AXI]		= &axi_clk.common.hw,
> +		[CLK_AHB1]		= &ahb1_clk.common.hw,
> +		[CLK_APB1]		= &apb1_clk.common.hw,
> +		[CLK_APB2]		= &apb2_clk.common.hw,
> +		[CLK_AHB2]		= &ahb2_clk.common.hw,
> +		[CLK_BUS_CE]		= &bus_ce_clk.common.hw,
> +		[CLK_BUS_DMA]		= &bus_dma_clk.common.hw,
> +		[CLK_BUS_MMC0]		= &bus_mmc0_clk.common.hw,
> +		[CLK_BUS_MMC1]		= &bus_mmc1_clk.common.hw,
> +		[CLK_BUS_MMC2]		= &bus_mmc2_clk.common.hw,
> +		[CLK_BUS_NAND]		= &bus_nand_clk.common.hw,
> +		[CLK_BUS_DRAM]		= &bus_dram_clk.common.hw,
> +		[CLK_BUS_EMAC]		= &bus_emac_clk.common.hw,
> +		[CLK_BUS_TS]		= &bus_ts_clk.common.hw,
> +		[CLK_BUS_HSTIMER]	= &bus_hstimer_clk.common.hw,
> +		[CLK_BUS_SPI0]		= &bus_spi0_clk.common.hw,
> +		[CLK_BUS_SPI1]		= &bus_spi1_clk.common.hw,
> +		[CLK_BUS_OTG]		= &bus_otg_clk.common.hw,
> +		[CLK_BUS_EHCI0]		= &bus_ehci0_clk.common.hw,
> +		[CLK_BUS_EHCI1]		= &bus_ehci1_clk.common.hw,
> +		[CLK_BUS_EHCI2]		= &bus_ehci2_clk.common.hw,
> +		[CLK_BUS_EHCI3]		= &bus_ehci3_clk.common.hw,
> +		[CLK_BUS_OHCI0]		= &bus_ohci0_clk.common.hw,
> +		[CLK_BUS_OHCI1]		= &bus_ohci1_clk.common.hw,
> +		[CLK_BUS_OHCI2]		= &bus_ohci2_clk.common.hw,
> +		[CLK_BUS_OHCI3]		= &bus_ohci3_clk.common.hw,
> +		[CLK_BUS_VE]		= &bus_ve_clk.common.hw,
> +		[CLK_BUS_TCON0]		= &bus_tcon0_clk.common.hw,
> +		[CLK_BUS_TCON1]		= &bus_tcon1_clk.common.hw,
> +		[CLK_BUS_DEINTERLACE]	= &bus_deinterlace_clk.common.hw,
> +		[CLK_BUS_CSI]		= &bus_csi_clk.common.hw,
> +		[CLK_BUS_TVE]		= &bus_tve_clk.common.hw,
> +		[CLK_BUS_HDMI]		= &bus_hdmi_clk.common.hw,
> +		[CLK_BUS_DE]		= &bus_de_clk.common.hw,
> +		[CLK_BUS_GPU]		= &bus_gpu_clk.common.hw,
> +		[CLK_BUS_MSGBOX]	= &bus_msgbox_clk.common.hw,
> +		[CLK_BUS_SPINLOCK]	= &bus_spinlock_clk.common.hw,
> +		[CLK_BUS_CODEC]		= &bus_codec_clk.common.hw,
> +		[CLK_BUS_SPDIF]		= &bus_spdif_clk.common.hw,
> +		[CLK_BUS_PIO]		= &bus_pio_clk.common.hw,
> +		[CLK_BUS_THS]		= &bus_ths_clk.common.hw,
> +		[CLK_BUS_I2S0]		= &bus_i2s0_clk.common.hw,
> +		[CLK_BUS_I2S1]		= &bus_i2s1_clk.common.hw,
> +		[CLK_BUS_I2S2]		= &bus_i2s2_clk.common.hw,
> +		[CLK_BUS_I2C0]		= &bus_i2c0_clk.common.hw,
> +		[CLK_BUS_I2C1]		= &bus_i2c1_clk.common.hw,
> +		[CLK_BUS_I2C2]		= &bus_i2c2_clk.common.hw,
> +		[CLK_BUS_UART0]		= &bus_uart0_clk.common.hw,
> +		[CLK_BUS_UART1]		= &bus_uart1_clk.common.hw,
> +		[CLK_BUS_UART2]		= &bus_uart2_clk.common.hw,
> +		[CLK_BUS_UART3]		= &bus_uart3_clk.common.hw,
> +		[CLK_BUS_SCR0]		= &bus_scr0_clk.common.hw,
> +		[CLK_BUS_SCR1]		= &bus_scr1_clk.common.hw,
> +		[CLK_BUS_EPHY]		= &bus_ephy_clk.common.hw,
> +		[CLK_BUS_DBG]		= &bus_dbg_clk.common.hw,
> +		[CLK_THS]		= &ths_clk.common.hw,
> +		[CLK_NAND]		= &nand_clk.common.hw,
> +		[CLK_MMC0]		= &mmc0_clk.common.hw,
> +		[CLK_MMC1]		= &mmc1_clk.common.hw,
> +		[CLK_MMC2]		= &mmc2_clk.common.hw,
> +		[CLK_TS]		= &ts_clk.common.hw,
> +		[CLK_CE]		= &ce_clk.common.hw,
> +		[CLK_SPI0]		= &spi0_clk.common.hw,
> +		[CLK_SPI1]		= &spi1_clk.common.hw,
> +		[CLK_I2S0]		= &i2s0_clk.common.hw,
> +		[CLK_I2S1]		= &i2s1_clk.common.hw,
> +		[CLK_I2S2]		= &i2s2_clk.common.hw,
> +		[CLK_SPDIF]		= &spdif_clk.common.hw,
> +		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
> +		[CLK_USB_PHY1]		= &usb_phy1_clk.common.hw,
> +		[CLK_USB_PHY2]		= &usb_phy2_clk.common.hw,
> +		[CLK_USB_PHY3]		= &usb_phy3_clk.common.hw,
> +		[CLK_USB_OHCI0]		= &usb_ohci0_clk.common.hw,
> +		[CLK_USB_OHCI1]		= &usb_ohci1_clk.common.hw,
> +		[CLK_USB_OHCI2]		= &usb_ohci2_clk.common.hw,
> +		[CLK_USB_OHCI3]		= &usb_ohci3_clk.common.hw,
> +		[CLK_DRAM]		= &dram_clk.common.hw,
> +		[CLK_DRAM_VE]		= &dram_ve_clk.common.hw,
> +		[CLK_DRAM_CSI]		= &dram_csi_clk.common.hw,
> +		[CLK_DRAM_DEINTERLACE]	= &dram_deinterlace_clk.common.hw,
> +		[CLK_DRAM_TS]		= &dram_ts_clk.common.hw,
> +		[CLK_DE]		= &de_clk.common.hw,
> +		[CLK_TCON0]		= &tcon_clk.common.hw,
> +		[CLK_TVE]		= &tve_clk.common.hw,
> +		[CLK_DEINTERLACE]	= &deinterlace_clk.common.hw,
> +		[CLK_CSI_MISC]		= &csi_misc_clk.common.hw,
> +		[CLK_CSI_SCLK]		= &csi_sclk_clk.common.hw,
> +		[CLK_CSI_MCLK]		= &csi_mclk_clk.common.hw,
> +		[CLK_VE]		= &ve_clk.common.hw,
> +		[CLK_AC_DIG]		= &ac_dig_clk.common.hw,
> +		[CLK_AVS]		= &avs_clk.common.hw,
> +		[CLK_HDMI]		= &hdmi_clk.common.hw,
> +		[CLK_HDMI_DDC]		= &hdmi_ddc_clk.common.hw,
> +		[CLK_MBUS]		= &mbus_clk.common.hw,
> +		[CLK_GPU]		= &gpu_clk.common.hw,
> +	},
> +	.num	= CLK_NUMBER,
> +};
> +
>  static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
>  	[RST_USB_PHY0]		=  { 0x0cc, BIT(0) },
>  	[RST_USB_PHY1]		=  { 0x0cc, BIT(1) },
> @@ -791,6 +910,7 @@ static struct ccu_reset_map sunxi_h3_h5_ccu_resets[] = {
>  	[RST_BUS_UART2]		=  { 0x2d8, BIT(18) },
>  	[RST_BUS_UART3]		=  { 0x2d8, BIT(19) },
>  	[RST_BUS_SCR0]		=  { 0x2d8, BIT(20) },
> +	[RST_BUS_SCR1]		=  { 0x2d8, BIT(21) },

That reset line is not valid on the H3.

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20170130/b6305843/attachment.sig>


More information about the Alsa-devel mailing list