[alsa-devel] [PATCH RFC 3/3] ALSA: x86: Use config base depending on the pipe

Takashi Iwai tiwai at suse.de
Fri Jan 27 11:36:31 CET 2017


Now the pipe that is being used is passed over i915 notification, we
can re-setup the had_config_offset depending on it at the hotplug.
This allows, at least, the stream transfer on the second DP working on
Dell Wyse 3040 box here (although it's still not audible by other
reasons).

Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
 sound/x86/intel_hdmi_lpe_audio.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/sound/x86/intel_hdmi_lpe_audio.c b/sound/x86/intel_hdmi_lpe_audio.c
index 23e5b34dcf41..55bc2cfd21c4 100644
--- a/sound/x86/intel_hdmi_lpe_audio.c
+++ b/sound/x86/intel_hdmi_lpe_audio.c
@@ -463,6 +463,22 @@ static void notify_audio_lpe(void *audio_ptr)
 
 	} else if (eld != NULL) {
 
+		switch (eld->pipe_id) {
+		case 0:
+			ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
+			break;
+		case 1:
+			ctx->had_config_offset = AUDIO_HDMI_CONFIG_B;
+			break;
+		case 2:
+			ctx->had_config_offset = AUDIO_HDMI_CONFIG_C;
+			break;
+		default:
+			dev_dbg(&hlpe_pdev->dev, "Invalid pipe %d\n",
+				eld->pipe_id);
+			break;
+		}
+
 		hdmi_set_eld(eld->eld_data);
 
 		mid_hdmi_audio_signal_event(HAD_EVENT_HOT_PLUG);
@@ -560,21 +576,15 @@ static int hdmi_lpe_audio_probe(struct platform_device *pdev)
 	ctx->mmio_start = mmio_start;
 	ctx->tmds_clock_speed = DIS_SAMPLE_RATE_148_5;
 
-	if (pci_dev_present(cherryview_ids)) {
+	if (pci_dev_present(cherryview_ids))
 		dev_dbg(&hlpe_pdev->dev, "%s: Cherrytrail LPE - Detected\n",
 				__func__);
-		//ctx->had_config_offset = AUDIO_HDMI_CONFIG_C;
-		/* FIXME: hard-coding to CONFIG_A enables DP audio on CHT,
-		 *  how do I find out which config to use ?
-		 * the pipe is -1 (invalid) when the notify function is called,
-		 * so not sure how to go about this
-		 */
-		ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
-	} else {
+	else
 		dev_dbg(&hlpe_pdev->dev, "%s: Baytrail LPE - Assume\n",
 				__func__);
-		ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
-	}
+
+	/* assume pipe A as default */
+	ctx->had_config_offset = AUDIO_HDMI_CONFIG_A;
 
 	pdata = pdev->dev.platform_data;
 
-- 
2.11.0



More information about the Alsa-devel mailing list