[alsa-devel] [PATCH v2 03/13] ASoC: Intel: Skylake: Use set_tdm_slot to set the dma channel

jeeja.kp at intel.com jeeja.kp at intel.com
Wed Jan 18 17:04:43 CET 2017


From: Jeeja KP <jeeja.kp at intel.com>

DMA channel(stream tag) used by the HDA link need to programmed in
codec so that codec receives packet from the link associated with the
same channel.

DMA channel is allocated in link BE dai hw_params, the same needs to be
set for the BE codec dai. Instead of using get/set dma_data(), use
dai_ops snd_soc_dai_set_tdm_slot() to set the stream tag.

Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty at intel.com>
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
---
 sound/soc/intel/skylake/skl-pcm.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 508144b..b0817a12 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -542,10 +542,10 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	struct hdac_ext_bus *ebus = dev_get_drvdata(dai->dev);
 	struct hdac_ext_stream *link_dev;
 	struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
-	struct hdac_ext_dma_params *dma_params;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
 	struct skl_pipe_params p_params = {0};
 	struct hdac_ext_link *link;
+	int stream_tag;
 
 	link_dev = snd_hdac_ext_stream_assign(ebus, substream,
 					HDAC_EXT_STREAM_TYPE_LINK);
@@ -558,16 +558,16 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
 	if (!link)
 		return -EINVAL;
 
+	stream_tag = hdac_stream(link_dev)->stream_tag;
+
 	/* set the stream tag in the codec dai dma params  */
-	dma_params = snd_soc_dai_get_dma_data(codec_dai, substream);
-	if (dma_params)
-		dma_params->stream_tag =  hdac_stream(link_dev)->stream_tag;
+	snd_soc_dai_set_tdm_slot(codec_dai, stream_tag, 0, 0, 0);
 
 	p_params.s_fmt = snd_pcm_format_width(params_format(params));
 	p_params.ch = params_channels(params);
 	p_params.s_freq = params_rate(params);
 	p_params.stream = substream->stream;
-	p_params.link_dma_id = hdac_stream(link_dev)->stream_tag - 1;
+	p_params.link_dma_id = stream_tag - 1;
 	p_params.link_index = link->index;
 	p_params.format = params_format(params);
 
-- 
2.5.0



More information about the Alsa-devel mailing list