[alsa-devel] [PATCH v2 2/2] ASoC: Add driver support fro Conexant CX2092X DSP

Pierre-Louis Bossart pierre-louis.bossart at linux.intel.com
Tue Feb 21 15:09:22 CET 2017



On 02/20/2017 07:01 PM, simon.ho.cnxt at gmail.com wrote:
> From: Simon Ho <simon.ho at conexant.com>
>
> Initial commit of Conexant CX20921/CX20924 I2S Audio DSP driver
>
> Signed-off-by: Simon Ho <simon.ho at conexant.com>
> ---
>   sound/soc/codecs/Kconfig       |  17 ++
>   sound/soc/codecs/Makefile      |   6 +
>   sound/soc/codecs/cx2092x-i2c.c |  54 ++++++
>   sound/soc/codecs/cx2092x-spi.c |  57 ++++++
>   sound/soc/codecs/cx2092x.c     | 411 +++++++++++++++++++++++++++++++++++++++++
>   sound/soc/codecs/cx2092x.h     |  26 +++
>   6 files changed, 571 insertions(+)
>   create mode 100644 sound/soc/codecs/cx2092x-i2c.c
>   create mode 100644 sound/soc/codecs/cx2092x-spi.c
>   create mode 100644 sound/soc/codecs/cx2092x.c
>   create mode 100644 sound/soc/codecs/cx2092x.h
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index e49e9da..a98d3c2 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -63,6 +63,8 @@ config SND_SOC_ALL_CODECS
>   	select SND_SOC_CS47L24 if MFD_CS47L24
>   	select SND_SOC_CS53L30 if I2C
>   	select SND_SOC_CX20442 if TTY
> +	select SND_SOC_CX2092X_I2C if I2C
> +	select SND_SOC_CX2092X_SPI if SPI_MASTER
>   	select SND_SOC_DA7210 if SND_SOC_I2C_AND_SPI
>   	select SND_SOC_DA7213 if I2C
>   	select SND_SOC_DA7218 if I2C
> @@ -491,6 +493,21 @@ config SND_SOC_CX20442
>   	tristate
>   	depends on TTY
>   
> +config SND_SOC_CX2092X
> +	tristate
> +
> +config SND_SOC_CX2092X_I2C
> +	tristate "Conexant CX20921/CX2094 CODEC (I2C)"
> +	depends on I2C
> +	select SND_SOC_CX2092X
> +	select REGMAP_I2C
> +
> +config SND_SOC_CX2092X_SPI
> +	tristate "Conexant CX20921/CX2094 CODEC (SPI)"
> +	depends on SPI_MASTER
> +	select SND_SOC_CX2092X
> +	select REGMAP_SPI
> +
>   config SND_SOC_JZ4740_CODEC
>   	select REGMAP_MMIO
>   	tristate
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index 1796cb9..e30a398 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -56,6 +56,9 @@ snd-soc-cs4349-objs := cs4349.o
>   snd-soc-cs47l24-objs := cs47l24.o
>   snd-soc-cs53l30-objs := cs53l30.o
>   snd-soc-cx20442-objs := cx20442.o
> +snd-soc-cx2092x-objs := cx2092x.o
> +snd-soc-cx2092x-i2c-objs := cx2092x-i2c.o
> +snd-soc-cx2092x-spi-objs := cx2092x-spi.o
>   snd-soc-da7210-objs := da7210.o
>   snd-soc-da7213-objs := da7213.o
>   snd-soc-da7218-objs := da7218.o
> @@ -286,6 +289,9 @@ obj-$(CONFIG_SND_SOC_CS4349)	+= snd-soc-cs4349.o
>   obj-$(CONFIG_SND_SOC_CS47L24)	+= snd-soc-cs47l24.o
>   obj-$(CONFIG_SND_SOC_CS53L30)	+= snd-soc-cs53l30.o
>   obj-$(CONFIG_SND_SOC_CX20442)	+= snd-soc-cx20442.o
> +obj-$(CONFIG_SND_SOC_CX2092X)	+= snd-soc-cx2092x.o
> +obj-$(CONFIG_SND_SOC_CX2092X_I2C)	+= snd-soc-cx2092x-i2c.o
> +obj-$(CONFIG_SND_SOC_CX2092X_SPI)	+= snd-soc-cx2092x-spi.o
>   obj-$(CONFIG_SND_SOC_DA7210)	+= snd-soc-da7210.o
>   obj-$(CONFIG_SND_SOC_DA7213)	+= snd-soc-da7213.o
>   obj-$(CONFIG_SND_SOC_DA7218)	+= snd-soc-da7218.o
> diff --git a/sound/soc/codecs/cx2092x-i2c.c b/sound/soc/codecs/cx2092x-i2c.c
> new file mode 100644
> index 0000000..a07800e
> --- /dev/null
> +++ b/sound/soc/codecs/cx2092x-i2c.c
> @@ -0,0 +1,54 @@
> +/*
> + * cx2092x-i2c.c -- CX20921 and CX20924 I2C Audio driver
> + *
> + * Copyright:   (C) 2017 Conexant Systems, Inc.
> + *
> + * This is based on Alexander Sverdlin's CS4271 driver code.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +#include <sound/soc.h>
> +#include "cx2092x.h"
> +
> +static int cx2092x_i2c_probe(struct i2c_client *i2c,
> +		const struct i2c_device_id *id)
> +{
> +	return cx2092x_dev_probe(&i2c->dev,
> +			devm_regmap_init_i2c(i2c, &cx2092x_regmap_config));
> +}
> +static int cx2092x_i2c_remove(struct i2c_client *client)
> +{
> +	snd_soc_unregister_codec(&client->dev);
> +	return 0;
> +}
> +
> +static const struct i2c_device_id cx2092x_i2c_id[] = {
> +	{"cx20921", 0},
> +	{"cx20924", 0},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, cx2092x_i2c_id);
> +
> +static struct i2c_driver cx2092x_i2c_driver = {
> +	.driver = {
> +		.name = "cx2092x",
> +		.owner = THIS_MODULE,
field not needed
> +		.of_match_table = of_match_ptr(cx2092x_dt_ids),
> +	},
> +	.id_table = cx2092x_i2c_id,
> +	.probe = cx2092x_i2c_probe,
> +	.remove = cx2092x_i2c_remove,
> +};
> +module_i2c_driver(cx2092x_i2c_driver);
> +
> +MODULE_DESCRIPTION("ASoC CX2092X I2C Driver");
> +MODULE_AUTHOR("Simon Ho <simon.ho at conexant.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/soc/codecs/cx2092x-spi.c b/sound/soc/codecs/cx2092x-spi.c
> new file mode 100644
> index 0000000..3723909
> --- /dev/null
> +++ b/sound/soc/codecs/cx2092x-spi.c
> @@ -0,0 +1,57 @@
> +/*
> + * cx2092x-spi.c -- CX20921 and CX20924 SPI Audio driver
> + *
> + * Copyright:   (C) 2017 Conexant Systems, Inc.
> + *
> + * This is based on Alexander Sverdlin's CS4271 driver code.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/regmap.h>
> +#include <sound/soc.h>
> +#include "cx2092x.h"
> +
> +static int cx2092x_spi_probe(struct spi_device *spi)
> +{
> +	struct regmap_config config;
> +
> +	config = cx2092x_regmap_config;
> +	config.write_flag_mask = 0x81;
human-readable value to explain what this does?
> +
> +	return cx2092x_dev_probe(&spi->dev,
> +			devm_regmap_init_spi(spi, &cx2092x_regmap_config));
> +}
> +
> +static int cx2092x_spi_remove(struct spi_device *spi)
> +{
> +	snd_soc_unregister_codec(&spi->dev);
> +	return 0;
> +}
> +
> +static const struct spi_device_id cx2092x_spi_id[] = {
> +	{"cx20921", 0},
> +	{"cx20924", 0},
> +	{}
> +};
> +
> +static struct spi_driver cx2092x_spi_driver = {
> +	.driver = {
> +		.name = "cx2092x",
> +		.of_match_table = of_match_ptr(cx2092x_dt_ids),
> +	},
> +	.id_table = cx2092x_spi_id,
> +	.probe = cx2092x_spi_probe,
> +	.remove = cx2092x_spi_remove,
> +};
> +
> +module_spi_driver(cx2092x_spi_driver);
> +
> +MODULE_DESCRIPTION("ASoC CX2092X SPI Driver");
> +MODULE_AUTHOR("Simon Ho <simon.ho at conexant.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/soc/codecs/cx2092x.c b/sound/soc/codecs/cx2092x.c
> new file mode 100644
> index 0000000..a15e3f9
> --- /dev/null
> +++ b/sound/soc/codecs/cx2092x.c
> @@ -0,0 +1,411 @@
> +/*
> + * cx2092x.c -- CX20921 and CX20924 ALSA SoC Audio driver
> + *
> + * Copyright:   (C) 2017 Conexant Systems, Inc.
> + *
> + * This is based on Alexander Sverdlin's CS4271 driver code.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/of_gpio.h>
> +#include <linux/gpio/consumer.h>
> +#include <sound/pcm.h>
> +#include <sound/soc.h>
> +#include "cx2092x.h"
> +
> +#define CX2092X_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
> +			 SNDRV_PCM_FMTBIT_S24_LE | \
> +			 SNDRV_PCM_FMTBIT_S32_LE)
> +
> +#define CX2092X_CAPE_ID(a, b, c, d)  (((a) - 0x20) << 8 | \
> +				      ((b) - 0x20) << 14| \
> +				      ((c) - 0x20) << 20| \
> +				      ((d) - 0x20) << 26)
> +
> +#define CX2092X_ID2CH_A(id)  (((((unsigned int)(id)) >> 8) & 0x3f) + 0x20)
> +#define CX2092X_ID2CH_B(id)  (((((unsigned int)(id)) >> 14) & 0x3f) + 0x20)
> +#define CX2092X_ID2CH_C(id)  (((((unsigned int)(id)) >> 20) & 0x3f) + 0x20)
> +#define CX2092X_ID2CH_D(id)  (((((unsigned int)(id)) >> 26) & 0x3f) + 0x20)
> +
> +#define CX2092X_CONTROL(xname, xinfo, xget, xput, xaccess) { \
> +	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
> +	.access = xaccess, .info = xinfo, .get = xget, .put = xput, \
> +	}
> +
> +#define CX2092X_CMD_GET(item)   ((item) |  0x0100)
> +#define CX2092X_CMD_SIZE 13
> +
> +/*
> + * Defines the command format which is used to communicate with cx2092x device.
> + */
> +struct cx2092x_cmd {
> +	int	num_32b_words:16;   /* Indicates how many data to be sent.
> +				     * If operation is successful, this will
> +				     * be updated with the number of returned
> +				     * data in word. one word == 4 bytes.
> +				     */
> +
> +	u32	command_id:15;
> +	u32	reply:1;            /* The device will set this flag once
> +				     * the operation is complete.
> +				     */
> +	u32	app_module_id;
> +	u32	data[CX2092X_CMD_SIZE]; /* Used for storing parameters and
> +					 * receiving the returned data from
> +					 * device.
> +					 */
> +};
> +
> +/* codec private data*/
> +struct cx2092x_priv {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	struct gpio_desc *gpiod_reset;
> +	struct cx2092x_cmd cmd;
> +	int cmd_res;
> +};
> +
> +/*
> + * This functions takes cx2092x_cmd structure as input and output parameters
> + * to communicate CX2092X. If operation is successfully, it returns number of
> + * returned data and stored the returned data in "cmd->data" array.
> + * Otherwise, it returns the error code.
> + */
> +static int cx2092x_sendcmd(struct snd_soc_codec *codec,
> +			   struct cx2092x_cmd *cmd)
> +{
> +	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
> +	int ret = 0;
> +	int num_32b_words = cmd->num_32b_words;
> +	unsigned long time_out;
> +	u32 *i2c_data = (u32 *)cmd;
> +	int size = num_32b_words + 2;
> +
> +	/* calculate how many WORD that will be wrote to device*/
written to
> +	cmd->num_32b_words = cmd->command_id & CX2092X_CMD_GET(0) ?
> +			     CX2092X_CMD_SIZE : num_32b_words;
> +
> +
> +	/* write all command data except fo frist 4 bytes*/
first
> +	ret = regmap_bulk_write(cx2092x->regmap, 4, &i2c_data[1], size - 1);
shouldn't size be set on the actual cmd->num_32b_words, here you are 
using the value prior to the test?
> +	if (ret < 0) {
> +		dev_err(cx2092x->dev, "Failed to write command data\n");
> +		goto LEAVE;
> +	}
> +
> +	/* write first 4 bytes command data*/
> +	ret = regmap_bulk_write(cx2092x->regmap, 0, i2c_data, 1);
> +	if (ret < 0) {
> +		dev_err(cx2092x->dev, "Failed to write command\n");
> +		goto LEAVE;
> +	}
> +
> +	/* continuously read the first bytes data from device until
> +	 * either timeout or the flag 'reply' is set.
> +	 */
> +	time_out = msecs_to_jiffies(2000);
> +	time_out += jiffies;
> +	do {
> +		regmap_bulk_read(cx2092x->regmap, 0, &i2c_data[0], 1);
> +		if (cmd->reply == 1)
> +			break;
> +		mdelay(10);
> +
> +	} while (!time_after(jiffies, time_out));
> +
> +	if (cmd->reply == 1) {
> +		/* check if there is returned data. If yes copy the returned
> +		 * data to cmd->data array
> +		 */
> +		if (cmd->num_32b_words > 0)
> +			regmap_bulk_read(cx2092x->regmap, 8, &i2c_data[2],
> +					 cmd->num_32b_words);
> +		/* return error code if operation is not successful.*/
> +		else if (cmd->num_32b_words < 0)
> +			dev_err(cx2092x->dev, "SendCmd failed, err = %d\n",
> +				cmd->num_32b_words);
> +
> +		ret = cmd->num_32b_words;
> +	} else {
> +		dev_err(cx2092x->dev, "SendCmd timeout\n");
> +		ret = -EBUSY;
> +	}
> +
> +LEAVE:
> +	return ret;
> +}
> +
> +
> +static int cmd_info(struct snd_kcontrol *kcontrol,
> +		struct snd_ctl_elem_info *uinfo)
> +{
> +	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
> +	uinfo->count = sizeof(struct cx2092x_cmd);
> +
> +	return 0;
> +}
> +
> +static int cmd_get(struct snd_kcontrol *kcontrol,
> +		struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
> +	struct cx2092x_priv *cx2092x =
> +		snd_soc_component_get_drvdata(component);
> +
> +	memcpy(ucontrol->value.bytes.data, &cx2092x->cmd,
> +			sizeof(cx2092x->cmd));
> +
> +	return 0;
> +}
> +
> +static int cmd_put(struct snd_kcontrol *kcontrol,
> +		   struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
> +	struct cx2092x_priv *cx2092x = snd_soc_component_get_drvdata(component);
> +	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
> +
> +	memcpy(&cx2092x->cmd, ucontrol->value.bytes.data,
> +			sizeof(cx2092x->cmd));
> +
> +	cx2092x->cmd_res = cx2092x_sendcmd(codec, &cx2092x->cmd);
> +
> +	if (cx2092x->cmd_res < 0)
> +		dev_err(codec->dev, "Failed to send cmd, ret = %d\n",
> +			cx2092x->cmd_res);
> +
> +	return cx2092x->cmd_res < 0 ? cx2092x->cmd_res : 0;
return cmd_res in if block and return 0 otherwise?
> +}
> +
> +
> +static int mode_info(struct snd_kcontrol *kcontrol,
> +		     struct snd_ctl_elem_info *uinfo)
> +{
> +	uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
> +	uinfo->count = 4;
> +
> +	return 0;
> +}
> +
> +static int mode_get(struct snd_kcontrol *kcontrol,
> +		    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
> +	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
> +	struct cx2092x_cmd cmd;
> +	int ret = 0;
> +
> +	cmd.command_id = 0x12f; /*CX2092X_CMD_GET(SOS_RESOURCE);*/
> +	cmd.reply = 0;
> +	cmd.app_module_id = CX2092X_CAPE_ID('S', 'O', 'S', ' ');
SOS :-) ?
> +	cmd.num_32b_words = 1;
> +	cmd.data[0] = CX2092X_CAPE_ID('C', 'T', 'R', 'L');
> +
> +	ret = cx2092x_sendcmd(codec, &cmd);
> +	if (ret <= 0)
> +		dev_err(codec->dev, "Failed to get current mode, ret = %d\n",
> +			ret);
> +	else {
> +		ucontrol->value.bytes.data[0] = CX2092X_ID2CH_A(cmd.data[0]);
> +		ucontrol->value.bytes.data[1] = CX2092X_ID2CH_B(cmd.data[0]);
> +		ucontrol->value.bytes.data[2] = CX2092X_ID2CH_C(cmd.data[0]);
> +		ucontrol->value.bytes.data[3] = CX2092X_ID2CH_D(cmd.data[0]);
> +
> +		dev_dbg(codec->dev, "Current mode = %c%c%c%c\n",
> +			ucontrol->value.bytes.data[0],
> +			ucontrol->value.bytes.data[1],
> +			ucontrol->value.bytes.data[2],
> +			ucontrol->value.bytes.data[3]);
> +
> +		ret = 0;
> +	}
> +
> +	return ret;
> +}
> +
> +static int mode_put(struct snd_kcontrol *kcontrol,
> +		    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
> +	struct snd_soc_codec *codec = snd_soc_component_to_codec(component);
> +	struct cx2092x_cmd cmd;
> +	int ret = -1;
> +
> +	cmd.command_id = 4;
> +	cmd.reply = 0;
> +	cmd.app_module_id = CX2092X_CAPE_ID('C', 'T', 'R', 'L');
> +	cmd.num_32b_words = 1;
> +	cmd.data[0] = CX2092X_CAPE_ID(ucontrol->value.bytes.data[0],
> +				      ucontrol->value.bytes.data[1],
> +				      ucontrol->value.bytes.data[2],
> +				      ucontrol->value.bytes.data[3]);
> +
> +	ret = cx2092x_sendcmd(codec, &cmd);
> +	if (ret < 0) {
> +		dev_err(codec->dev, "Failed to set mode, ret =%d\n", ret);
> +	} else {
> +		dev_dbg(codec->dev, "Set mode successfully, ret = %d\n", ret);
> +		ret = 0;
> +	}
> +
> +	return ret;
> +}
> +
> +static const struct snd_kcontrol_new cx2092x_snd_controls[] = {
> +	CX2092X_CONTROL("SendCmd", cmd_info, cmd_get, cmd_put,
> +		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
> +		SNDRV_CTL_ELEM_ACCESS_VOLATILE),
> +	CX2092X_CONTROL("Mode", mode_info, mode_get, mode_put,
> +		SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_WRITE|
> +		SNDRV_CTL_ELEM_ACCESS_VOLATILE),
> +};
> +
> +
> +static const struct snd_soc_dapm_widget cx2092x_dapm_widgets[] = {
> +	SND_SOC_DAPM_AIF_OUT("Mic AIF", "Capture", 0,
> +			     SND_SOC_NOPM, 0, 0),
> +	SND_SOC_DAPM_INPUT("MIC"),
> +};
> +
> +static const struct snd_soc_dapm_route cx2092x_intercon[] = {
> +	{"Mic AIF", NULL, "MIC"},
> +};
> +
> +
> +static struct snd_soc_dai_driver soc_codec_cx2092x_dai[] = {
> +	{
> +		.name = "cx2092x-aif",
> +		.capture = {
> +		.stream_name = "Capture",
> +		.channels_min = 2,
> +		.channels_max = 2,
> +		.rates = SNDRV_PCM_RATE_48000,
> +		.formats = CX2092X_FORMATS,
> +		},
> +	},
> +	{
> +		.name = "cx2092x-dsp",
> +		.capture = {
> +		.stream_name = "AEC Ref",
explain what AEC ref means if there is no playback?
> +		.channels_min = 2,
> +		.channels_max = 2,
> +		.rates = SNDRV_PCM_RATE_48000,
> +		.formats = CX2092X_FORMATS,
> +		},
> +	},
> +};
> +
> +static int cx2092x_reset(struct snd_soc_codec *codec)
> +{
> +	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
> +
> +	if (cx2092x->gpiod_reset) {
> +		gpiod_set_value_cansleep(cx2092x->gpiod_reset, 0);
> +		mdelay(10);
> +		gpiod_set_value_cansleep(cx2092x->gpiod_reset, 1);
> +	}
> +
> +	return 0;
> +}
> +
> +const struct of_device_id cx2092x_dt_ids[] = {
> +	{ .compatible = "cnxt,cx20921", },
> +	{ .compatible = "cnxt,cx20924", },
> +	{ }
> +};
> +EXPORT_SYMBOL_GPL(cx2092x_dt_ids);
> +MODULE_DEVICE_TABLE(of, cx2092x_dt_ids);
> +
> +static int cx2092x_probe(struct snd_soc_codec *codec)
> +{
> +	return cx2092x_reset(codec);
> +}
> +
> +static int cx2092x_remove(struct snd_soc_codec *codec)
> +{
> +	struct cx2092x_priv *cx2092x = snd_soc_codec_get_drvdata(codec);
> +
> +	if (cx2092x->gpiod_reset)
> +		/* Set codec to the reset state */
> +		gpiod_set_value_cansleep(cx2092x->gpiod_reset, 0);
> +
> +	return 0;
> +}
> +
> +static const struct snd_soc_codec_driver soc_codec_driver_cx2092x = {
> +	.probe = cx2092x_probe,
> +	.remove = cx2092x_remove,
> +
> +	.component_driver = {
> +		.controls = cx2092x_snd_controls,
> +		.num_controls = ARRAY_SIZE(cx2092x_snd_controls),
> +		.dapm_widgets = cx2092x_dapm_widgets,
> +		.num_dapm_widgets = ARRAY_SIZE(cx2092x_dapm_widgets),
> +		.dapm_routes = cx2092x_intercon,
> +		.num_dapm_routes = ARRAY_SIZE(cx2092x_intercon),
> +	},
> +};
> +EXPORT_SYMBOL_GPL(soc_codec_driver_cx2092x);
> +
> +static bool cx2092x_volatile_register(struct device *dev, unsigned int reg)
> +{
> +	return true; /*all register are volatile*/
> +}
> +
> +const struct regmap_config cx2092x_regmap_config = {
> +	.reg_bits = 16,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = CX2092X_REG_MAX,
> +	.cache_type = REGCACHE_NONE,
> +	.volatile_reg = cx2092x_volatile_register,
> +	.val_format_endian = REGMAP_ENDIAN_NATIVE,
> +};
> +EXPORT_SYMBOL_GPL(cx2092x_regmap_config);
> +
> +int cx2092x_dev_probe(struct device *dev, struct regmap *regmap)
> +{
> +	struct cx2092x_priv *cx2092x;
> +	int ret;
> +
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	cx2092x = devm_kzalloc(dev, sizeof(*cx2092x), GFP_KERNEL);
> +	if (!cx2092x)
> +		return -ENOMEM;
> +
> +	/* GPIOs */
> +	cx2092x->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
> +						       GPIOD_OUT_LOW);
> +	if (IS_ERR(cx2092x->gpiod_reset))
> +		return PTR_ERR(cx2092x->gpiod_reset);
> +
> +	dev_set_drvdata(dev, cx2092x);
> +	cx2092x->regmap = regmap;
> +	cx2092x->dev = dev;
> +
> +	ret = snd_soc_register_codec(cx2092x->dev, &soc_codec_driver_cx2092x,
> +				soc_codec_cx2092x_dai,
> +				ARRAY_SIZE(soc_codec_cx2092x_dai));
> +	if (ret < 0)
> +		dev_err(dev, "Failed to register codec: %d\n", ret);
> +	else
> +		dev_dbg(dev, "%s: Register codec.\n", __func__);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(cx2092x_dev_probe);
> +
> +MODULE_DESCRIPTION("ASoC CX2092X ALSA SoC Driver");
> +MODULE_AUTHOR("Simon Ho <simon.ho at conexant.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/sound/soc/codecs/cx2092x.h b/sound/soc/codecs/cx2092x.h
> new file mode 100644
> index 0000000..9577be8
> --- /dev/null
> +++ b/sound/soc/codecs/cx2092x.h
> @@ -0,0 +1,26 @@
> +/*
> + * cx2092x.h -- CX20921 and CX20924 Audio driver
> + *
> + * Copyright:   (C) 2017 Conexant Systems, Inc.
> + *
> + * This is based on Alexander Sverdlin's CS4271 driver code.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __CX2092X_PRIV_H__
> +#define __CX2092X_PRIV_H__
> +
> +#include <linux/regmap.h>
> +
> +extern const struct of_device_id cx2092x_dt_ids[];
> +extern const struct regmap_config cx2092x_regmap_config;
> +
> +int cx2092x_dev_probe(struct device *dev, struct regmap *regmap);
> +
> +#define CX2092X_REG_MAX 0x2000
> +
> +#endif



More information about the Alsa-devel mailing list