[alsa-devel] [PATCH v4 00/15] soundwire: Add a new SoundWire subsystem
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Sat Dec 2 01:24:10 CET 2017
On 12/1/17 3:56 AM, Vinod Koul wrote:
> This patch series adds a new SoundWire subsystem which implements a
> new MIPI bus protocol 'SoundWire'.
Sorry for the late feedback Vinod and team.
Overall the code looks very good to me and aligned with the MIPI specs,
there are only a couple of points that were added (or some code not
removed) during the code cleanups, e.g.
- device12..14 should not be used
- device_property handling (master/controller confusion?)
- error cases on transfers
- spec race condition on interrupt clear (not bad but to be discussed
further)
- some comments and code nit-picks
This is starting to get into second-order reviews really, which shows
this is becoming quite mature. And for the record this work isn't just
scratching the surface, it helped identify a couple of documentation
issues in the MIPI specs which will lead to clarifications in future
revisions.
Looking forward to a v5 ;-)
Thanks,
-Pierre
>
> The SoundWire protocol is a robust, scalable, low complexity, low
> power, low latency, two-pin (clock and data) multi-drop bus that
> allows for the transfer of multiple audio streams and embedded
> control/commands. SoundWire provides synchronization capabilities
> and supports both PCM and PDM, multichannel data, isochronous and
> asynchronous modes.
>
> This series adds SoundWire Bus, IO transfers, DisCo (Discovery and
> Configuration) sysfs interface, regmap and Documentation summary
>
> This patch series is also available on
> git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire.git topic/patch_v4
>
> v3: https://lkml.org/lkml/2017/11/30/160
> v2: https://lkml.org/lkml/2017/11/10/216
> v1: https://lkml.org/lkml/2017/10/18/1030
> RFC: https://lkml.org/lkml/2016/10/21/395
>
> Changes in v4:
> - Remove text licenses and add SPDX tags only with C99 style comments
> - make bus_type code as GPL v2.0 only
>
> Changes in v3:
> - Update the kernel-doc styles and fix included headers for files
> - handle dev_pm_domain_attach() for defered probe
> - remove OF placeholders
> - change regmap license to GPLv2 only
>
> Changes in v2:
> - move documentation into driver-api and do rst conversion
> - fix documentation comments
> - add SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) to all
> source files
> - rework the transfer logic and paging logic as commented on v1
> - remove dummy sysfs fns
> - registration checks and fixes
> - remove slave check for regamp as that turned superfluous
> - remove depends SoundWire symbol
> - make modalias api arg const
> - use bitmap for tracking assigned
> - add counter for report present tracking
> todo: add the dt-bindings
>
> Sanyog Kale (4):
> Documentation: Add SoundWire summary
> soundwire: Add SoundWire MIPI defined registers
> soundwire: Add Slave status handling helpers
> soundwire: cdns: Add sdw_master_ops and IO transfer support
>
> Vinod Koul (11):
> soundwire: Add SoundWire bus type
> soundwire: Add Master registration
> soundwire: Add MIPI DisCo property helpers
> soundwire: Add IO transfer
> regmap: Add SoundWire bus support
> soundwire: Add slave status handling
> soundwire: Add sysfs for SoundWire DisCo properties
> soundwire: cdns: Add cadence library
> soundwire: intel: Add Intel Master driver
> soundwire: intel: Add Intel init module
> MAINTAINERS: Add SoundWire entry
>
> Documentation/driver-api/index.rst | 1 +
> Documentation/driver-api/soundwire/index.rst | 15 +
> Documentation/driver-api/soundwire/summary.rst | 205 ++++++
> MAINTAINERS | 10 +
> drivers/Kconfig | 2 +
> drivers/Makefile | 1 +
> drivers/base/regmap/Kconfig | 4 +
> drivers/base/regmap/Makefile | 1 +
> drivers/base/regmap/regmap-sdw.c | 92 +++
> drivers/soundwire/Kconfig | 37 +
> drivers/soundwire/Makefile | 18 +
> drivers/soundwire/bus.c | 958 +++++++++++++++++++++++++
> drivers/soundwire/bus.h | 74 ++
> drivers/soundwire/bus_type.c | 193 +++++
> drivers/soundwire/cadence_master.c | 749 +++++++++++++++++++
> drivers/soundwire/cadence_master.h | 48 ++
> drivers/soundwire/intel.c | 347 +++++++++
> drivers/soundwire/intel.h | 23 +
> drivers/soundwire/intel_init.c | 198 +++++
> drivers/soundwire/mipi_disco.c | 374 ++++++++++
> drivers/soundwire/slave.c | 115 +++
> drivers/soundwire/sysfs.c | 343 +++++++++
> include/linux/mod_devicetable.h | 6 +
> include/linux/regmap.h | 37 +
> include/linux/soundwire/sdw.h | 487 +++++++++++++
> include/linux/soundwire/sdw_intel.h | 24 +
> include/linux/soundwire/sdw_registers.h | 194 +++++
> include/linux/soundwire/sdw_type.h | 19 +
> scripts/mod/devicetable-offsets.c | 4 +
> scripts/mod/file2alias.c | 15 +
> 30 files changed, 4594 insertions(+)
> create mode 100644 Documentation/driver-api/soundwire/index.rst
> create mode 100644 Documentation/driver-api/soundwire/summary.rst
> create mode 100644 drivers/base/regmap/regmap-sdw.c
> create mode 100644 drivers/soundwire/Kconfig
> create mode 100644 drivers/soundwire/Makefile
> create mode 100644 drivers/soundwire/bus.c
> create mode 100644 drivers/soundwire/bus.h
> create mode 100644 drivers/soundwire/bus_type.c
> create mode 100644 drivers/soundwire/cadence_master.c
> create mode 100644 drivers/soundwire/cadence_master.h
> create mode 100644 drivers/soundwire/intel.c
> create mode 100644 drivers/soundwire/intel.h
> create mode 100644 drivers/soundwire/intel_init.c
> create mode 100644 drivers/soundwire/mipi_disco.c
> create mode 100644 drivers/soundwire/slave.c
> create mode 100644 drivers/soundwire/sysfs.c
> create mode 100644 include/linux/soundwire/sdw.h
> create mode 100644 include/linux/soundwire/sdw_intel.h
> create mode 100644 include/linux/soundwire/sdw_registers.h
> create mode 100644 include/linux/soundwire/sdw_type.h
>
More information about the Alsa-devel
mailing list