[alsa-devel] [PATCH v4 00/12] Line6 POD X3/X3Live suport

[Takashi Iwai]

On Sun, 18 Sep 2016 20:59:20 +0200,
Andrej Krutak wrote:
> 
> Hello all,
> 
> 
> attached are the yet again reworked patches. Basically the diff is only some
> formatting. In addition, some of the previously big patches were split to
> multiple smaller ones. Compared to v3, there is a small bisectability/patch
> sanity fix.
> 
> I have checked that after each one, the compilation works, but not that the
> result doesn't segfault or even work - I don't have the hardware previously
> supported by the driver and the most interesting changes are only useful as
> a whole for POD X3.
> 
> Greetings!
> 
> 
> Andrej Krutak (12):
>   ALSA: line6: Enable different number of URBs for frame transfers
>   ALSA: line6: Add high-speed USB support
>   ALSA: line6: Support assymetrical in/out configurations
>   ALSA: line6: Allow different channel numbers for in/out
>   ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during
>     capture
>   ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer
>     (int EP)
>   ALSA: line6: Allow processing of raw incoming messages
>   ALSA: line6: Add support for POD X3
>   ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD
>     X3)
>   ALSA: line6: Only determine control port properties if needed
>   ALSA: line6: Cleanup podhd initialization
>   ALSA: line6: Add hwdep interface to access the POD control messages

OK, now all patches look almost good, so I applied them with a few
manual fixes of coding style issues checkpatch.pl copmlained, as well
as a fix of bit field type in patch 12.

Thanks!


Takashi