[alsa-devel] [PATCH v3 6/6] ASoC: fsl_ssi: Fix channel slipping on capture (or playback) restart in full duplex.

Arnaud Mouiche arnaud.mouiche at invoxia.com
Mon Jan 18 16:26:11 CET 2016


Happened when the Playback (or Capture) is running continuously
and Capture (or Playback) is restarted (xrun, manual stop/start...)

Since the RX (or TX) FIFO are only reset when the whole SSI is disabled,
pending samples from previous capture (or playback) session may still
be present. They must be erased to not introduce channel slipping.

FIFO Clear register fields are documented in IMX51, IMX35 reference manual.
They are not documented in IMX50 or IMX6 RM, despite they are
working as expected on IMX6SL and IMX6solo.

Signed-off-by: Arnaud Mouiche <arnaud.mouiche at invoxia.com>
---
 sound/soc/fsl/fsl_ssi.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index 530d592..50218ed 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -146,6 +146,7 @@ static bool fsl_ssi_volatile_reg(struct device *dev, unsigned int reg)
 	case CCSR_SSI_SRX1:
 	case CCSR_SSI_SISR:
 	case CCSR_SSI_SFCSR:
+	case CCSR_SSI_SOR:
 	case CCSR_SSI_SACNT:
 	case CCSR_SSI_SACADD:
 	case CCSR_SSI_SACDAT:
@@ -414,6 +415,26 @@ static void fsl_ssi_rxtx_config(struct fsl_ssi_private *ssi_private,
 }
 
 /*
+ * Clear RX or TX FIFO to remove samples from the previous
+ * stream session which may be still present in the FIFO and
+ * may introduce bad samples and/or channel slipping.
+ *
+ * Note: The SOR is not documented in recent IMX datasheet, but
+ * is described in IMX51 reference manual at section 56.3.3.15.
+ */
+static void fsl_ssi_fifo_clear(struct fsl_ssi_private *ssi_private,
+		bool is_rx)
+{
+	if (is_rx) {
+		regmap_update_bits(ssi_private->regs, CCSR_SSI_SOR,
+			CCSR_SSI_SOR_RX_CLR, CCSR_SSI_SOR_RX_CLR);
+	} else {
+		regmap_update_bits(ssi_private->regs, CCSR_SSI_SOR,
+			CCSR_SSI_SOR_TX_CLR, CCSR_SSI_SOR_TX_CLR);
+	}
+}
+
+/*
  * Calculate the bits that have to be disabled for the current stream that is
  * getting disabled. This keeps the bits enabled that are necessary for the
  * second stream to work if 'stream_active' is true.
@@ -488,6 +509,8 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable,
 	 * (online configuration)
 	 */
 	if (enable) {
+		fsl_ssi_fifo_clear(ssi_private, vals->scr & CCSR_SSI_SCR_RE);
+
 		regmap_update_bits(regs, CCSR_SSI_SRCR, vals->srcr, vals->srcr);
 		regmap_update_bits(regs, CCSR_SSI_STCR, vals->stcr, vals->stcr);
 		regmap_update_bits(regs, CCSR_SSI_SIER, vals->sier, vals->sier);
-- 
1.9.1



More information about the Alsa-devel mailing list