[alsa-devel] [Intel-gfx] [PATCH v2] drm/i915/dp: DP audio API changes for MST

Pandiyan, Dhinakaran dhinakaran.pandiyan at intel.com
Wed Aug 10 21:33:44 CEST 2016


On Wed, 2016-08-10 at 17:21 +0300, Ville Syrjälä wrote:
> On Tue, Aug 09, 2016 at 01:58:33PM -0700, Dhinakaran Pandiyan wrote:
> > DP MST provides the capability to send multiple video and audio streams
> > through a single port. This requires the API's between i915 and audio
> > drivers to distinguish between multiple audio capable displays that can be
> > connected to a port. Currently only the port identity is shared in the
> > APIs. This patch adds support for MST with an additional parameter
> > 'int pipe'.  The existing parameter 'port' does not change it's meaning.
> > 
> > pipe =
> > 	MST	: display pipe that the stream originates from
> > 	Non-MST	: -1
> > 
> > Affected APIs:
> > struct i915_audio_component_ops
> > -       int (*sync_audio_rate)(struct device *, int port, int rate);
> > +	int (*sync_audio_rate)(struct device *, int port, int pipe,
> > +	     int rate);
> > 
> > -       int (*get_eld)(struct device *, int port, bool *enabled,
> > -                       unsigned char *buf, int max_bytes);
> > +       int (*get_eld)(struct device *, int port, int pipe,
> > +		       bool *enabled, unsigned char *buf, int max_bytes);
> > 
> > struct i915_audio_component_audio_ops
> > -       void (*pin_eld_notify)(void *audio_ptr, int port);
> > +       void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
> > 
> > This patch makes dummy changes in the audio drivers (Libin) for build to
> > succeed. The audio side drivers will send the right 'pipe' values in
> > patches that will follow.
> > 
> > v2:
> > Renamed the new API parameter from 'dev_id' to 'pipe'. (Jim, Ville)
> > Included Asoc driver API compatibility changes from Jeeja.
> > Added WARN_ON() for invalid pipe in get_saved_encoder(). (Takashi)
> > Added comment for av_enc_map[] definition. (Takashi)
> > 
> > Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan at intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_drv.h    |  3 +-
> >  drivers/gpu/drm/i915/intel_audio.c | 92 ++++++++++++++++++++++++++------------
> >  include/drm/i915_component.h       |  6 +--
> >  include/sound/hda_i915.h           | 11 ++---
> >  sound/hda/hdac_i915.c              |  9 ++--
> >  sound/pci/hda/patch_hdmi.c         |  7 +--
> >  sound/soc/codecs/hdac_hdmi.c       |  2 +-
> >  7 files changed, 85 insertions(+), 45 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index c36d176..8e4a88f 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -2036,7 +2036,8 @@ struct drm_i915_private {
> >  	/* perform PHY state sanity checks? */
> >  	bool chv_phy_assert[2];
> >  
> > -	struct intel_encoder *dig_port_map[I915_MAX_PORTS];
> > +	/* Used to save the pipe-to-encoder mapping for audio */
> > +	struct intel_encoder *av_enc_map[I915_MAX_PIPES];
> >  
> >  	/*
> >  	 * NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
> > diff --git a/drivers/gpu/drm/i915/intel_audio.c b/drivers/gpu/drm/i915/intel_audio.c
> > index ef20875..240dad2 100644
> > --- a/drivers/gpu/drm/i915/intel_audio.c
> > +++ b/drivers/gpu/drm/i915/intel_audio.c
> > @@ -500,6 +500,7 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> >  	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
> >  	enum port port = intel_dig_port->port;
> > +	enum pipe pipe = -1;
> >  
> >  	connector = drm_select_eld(encoder);
> >  	if (!connector)
> > @@ -524,12 +525,18 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> >  
> >  	mutex_lock(&dev_priv->av_mutex);
> >  	intel_encoder->audio_connector = connector;
> > +
> >  	/* referred in audio callbacks */
> > -	dev_priv->dig_port_map[port] = intel_encoder;
> > +	dev_priv->av_enc_map[pipe] = intel_encoder;
> 
> [-1] doesn't look right.
> 
Fixed this, thanks for the review.
> >  	mutex_unlock(&dev_priv->av_mutex);
> >  
> > +
> > +	if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> > +		pipe = crtc->pipe;
> > +
> >  	if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
> > -		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
> > +		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
> > +						 (int) port, (int) pipe);
> >  }
> >  
> >  /**
> > @@ -542,22 +549,28 @@ void intel_audio_codec_enable(struct intel_encoder *intel_encoder)
> >  void intel_audio_codec_disable(struct intel_encoder *intel_encoder)
> >  {
> >  	struct drm_encoder *encoder = &intel_encoder->base;
> > +	struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
> >  	struct drm_device *dev = encoder->dev;
> >  	struct drm_i915_private *dev_priv = to_i915(dev);
> >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> >  	struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
> >  	enum port port = intel_dig_port->port;
> > +	enum pipe pipe = -1;
> >  
> >  	if (dev_priv->display.audio_codec_disable)
> >  		dev_priv->display.audio_codec_disable(intel_encoder);
> >  
> >  	mutex_lock(&dev_priv->av_mutex);
> >  	intel_encoder->audio_connector = NULL;
> > -	dev_priv->dig_port_map[port] = NULL;
> > +	dev_priv->av_enc_map[pipe] = NULL;
> 
> same
> 
Done.

> >  	mutex_unlock(&dev_priv->av_mutex);
> >  
> > +	if (intel_encoder->type == INTEL_OUTPUT_DP_MST)
> > +		pipe = crtc->pipe;
> > +
> >  	if (acomp && acomp->audio_ops && acomp->audio_ops->pin_eld_notify)
> > -		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr, (int) port);
> > +		acomp->audio_ops->pin_eld_notify(acomp->audio_ops->audio_ptr,
> > +						 (int) port, (int) pipe);
> >  }
> >  
> >  /**
> > @@ -632,15 +645,39 @@ static int i915_audio_component_get_cdclk_freq(struct device *dev)
> >  	return dev_priv->cdclk_freq;
> >  }
> >  
> > -static int i915_audio_component_sync_audio_rate(struct device *dev,
> > -						int port, int rate)
> > +static struct intel_encoder *get_saved_encoder(struct intel_encoder *av_enc_map[],
> > +					       int port, int pipe)
> > +{
> > +	struct drm_encoder *encoder;
> > +
> > +	if (WARN_ON(pipe >= I915_MAX_PIPES))
> > +		return NULL;
> > +
> > +	/* MST */
> > +	if (pipe != -1)
> > +		return av_enc_map[pipe];
> > +
> > +	/* Non-MST */
> > +	for (pipe = PIPE_A; pipe < I915_MAX_PIPES; pipe++) {
> > +		if (!av_enc_map[pipe])
> > +			continue;
> > +
> > +		encoder = &av_enc_map[pipe]->base;
> > +		if (port == enc_to_dig_port(encoder)->port)
> > +			return av_enc_map[pipe];
> > +	}
> > +
> > +	return NULL;
> > +}
> > +
> > +static int i915_audio_component_sync_audio_rate(struct device *dev, int port,
> > +						int pipe, int rate)
> >  {
> >  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> >  	struct intel_encoder *intel_encoder;
> >  	struct intel_crtc *crtc;
> >  	struct drm_display_mode *mode;
> >  	struct i915_audio_component *acomp = dev_priv->audio_component;
> > -	enum pipe pipe = INVALID_PIPE;
> >  	u32 tmp;
> >  	int n;
> >  	int err = 0;
> > @@ -654,25 +691,20 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> >  
> >  	i915_audio_component_get_power(dev);
> >  	mutex_lock(&dev_priv->av_mutex);
> > +
> >  	/* 1. get the pipe */
> > -	intel_encoder = dev_priv->dig_port_map[port];
> > -	/* intel_encoder might be NULL for DP MST */
> > +	intel_encoder = get_saved_encoder(dev_priv->av_enc_map, port, pipe);
> >  	if (!intel_encoder || !intel_encoder->base.crtc ||
> >  	    intel_encoder->type != INTEL_OUTPUT_HDMI) {
> > -		DRM_DEBUG_KMS("no valid port %c\n", port_name(port));
> > +		DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
> >  		err = -ENODEV;
> >  		goto unlock;
> >  	}
> > +
> > +	/* pipe passed from the audio driver will be -1 for non-mst case  */
> >  	crtc = to_intel_crtc(intel_encoder->base.crtc);
> >  	pipe = crtc->pipe;
> > -	if (pipe == INVALID_PIPE) {
> > -		DRM_DEBUG_KMS("no pipe for the port %c\n", port_name(port));
> > -		err = -ENODEV;
> > -		goto unlock;
> > -	}
> >  
> > -	DRM_DEBUG_KMS("pipe %c connects port %c\n",
> > -				  pipe_name(pipe), port_name(port));
> >  	mode = &crtc->config->base.adjusted_mode;
> >  
> >  	/* port must be valid now, otherwise the pipe will be invalid */
> > @@ -708,7 +740,7 @@ static int i915_audio_component_sync_audio_rate(struct device *dev,
> >  }
> >  
> >  static int i915_audio_component_get_eld(struct device *dev, int port,
> > -					bool *enabled,
> > +					int pipe, bool *enabled,
> >  					unsigned char *buf, int max_bytes)
> >  {
> >  	struct drm_i915_private *dev_priv = dev_to_i915(dev);
> > @@ -717,16 +749,20 @@ static int i915_audio_component_get_eld(struct device *dev, int port,
> >  	int ret = -EINVAL;
> >  
> >  	mutex_lock(&dev_priv->av_mutex);
> > -	intel_encoder = dev_priv->dig_port_map[port];
> > -	/* intel_encoder might be NULL for DP MST */
> > -	if (intel_encoder) {
> > -		ret = 0;
> > -		*enabled = intel_encoder->audio_connector != NULL;
> > -		if (*enabled) {
> > -			eld = intel_encoder->audio_connector->eld;
> > -			ret = drm_eld_size(eld);
> > -			memcpy(buf, eld, min(max_bytes, ret));
> > -		}
> > +
> > +	intel_encoder = get_saved_encoder(dev_priv->av_enc_map, port, pipe);
> > +	if (!intel_encoder) {
> > +		DRM_DEBUG_KMS("Not valid for port %c\n", port_name(port));
> > +		mutex_unlock(&dev_priv->av_mutex);
> > +		return ret;
> > +	}
> > +
> > +	ret = 0;
> > +	*enabled = intel_encoder->audio_connector != NULL;
> > +	if (*enabled) {
> > +		eld = intel_encoder->audio_connector->eld;
> > +		ret = drm_eld_size(eld);
> > +		memcpy(buf, eld, min(max_bytes, ret));
> >  	}
> >  
> >  	mutex_unlock(&dev_priv->av_mutex);
> > diff --git a/include/drm/i915_component.h b/include/drm/i915_component.h
> > index b46fa0e..545c6e0 100644
> > --- a/include/drm/i915_component.h
> > +++ b/include/drm/i915_component.h
> > @@ -64,7 +64,7 @@ struct i915_audio_component_ops {
> >  	 * Called from audio driver. After audio driver sets the
> >  	 * sample rate, it will call this function to set n/cts
> >  	 */
> > -	int (*sync_audio_rate)(struct device *, int port, int rate);
> > +	int (*sync_audio_rate)(struct device *, int port, int pipe, int rate);
> >  	/**
> >  	 * @get_eld: fill the audio state and ELD bytes for the given port
> >  	 *
> > @@ -77,7 +77,7 @@ struct i915_audio_component_ops {
> >  	 * Note that the returned size may be over @max_bytes.  Then it
> >  	 * implies that only a part of ELD has been copied to the buffer.
> >  	 */
> 
> Pleas update the docs to include what the pipe parameter means.
> Looks like most of these docs could use a little beefing up to make
> sure both sides follow the same contract. Right now there are a lot
> of grey areas.
> 

Sure, I will figure out where to make those changes and send a patch.

> > -	int (*get_eld)(struct device *, int port, bool *enabled,
> > +	int (*get_eld)(struct device *, int port, int pipe, bool *enabled,
> >  		       unsigned char *buf, int max_bytes);
> >  };
> >  
> > @@ -97,7 +97,7 @@ struct i915_audio_component_audio_ops {
> >  	 * status accordingly (even when the HDA controller is in power save
> >  	 * mode).
> >  	 */
> > -	void (*pin_eld_notify)(void *audio_ptr, int port);
> > +	void (*pin_eld_notify)(void *audio_ptr, int port, int pipe);
> >  };
> >  
> >  /**
> > diff --git a/include/sound/hda_i915.h b/include/sound/hda_i915.h
> > index 796cabf..07fd64e 100644
> > --- a/include/sound/hda_i915.h
> > +++ b/include/sound/hda_i915.h
> > @@ -10,8 +10,9 @@
> >  int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
> >  int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
> >  void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
> > -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate);
> > -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
> > +			     int pipe, int rate);
> > +int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int pipe,
> >  			   bool *audio_enabled, char *buffer, int max_bytes);
> >  int snd_hdac_i915_init(struct hdac_bus *bus);
> >  int snd_hdac_i915_exit(struct hdac_bus *bus);
> > @@ -29,13 +30,13 @@ static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
> >  {
> >  }
> >  static inline int snd_hdac_sync_audio_rate(struct hdac_device *codec,
> > -					   hda_nid_t nid, int rate)
> > +					   hda_nid_t nid, int pipe, int rate)
> >  {
> >  	return 0;
> >  }
> >  static inline int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > -					 bool *audio_enabled, char *buffer,
> > -					 int max_bytes)
> > +					 int pipe, bool *audio_enabled,
> > +					 char *buffer, int max_bytes)
> >  {
> >  	return -ENODEV;
> >  }
> > diff --git a/sound/hda/hdac_i915.c b/sound/hda/hdac_i915.c
> > index c9af022..b99994b 100644
> > --- a/sound/hda/hdac_i915.c
> > +++ b/sound/hda/hdac_i915.c
> > @@ -201,7 +201,8 @@ static int pin2port(struct hdac_device *codec, hda_nid_t pin_nid)
> >   * This function sets N/CTS value based on the given sample rate.
> >   * Returns zero for success, or a negative error code.
> >   */
> > -int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
> > +int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid,
> > +			     int pipe, int rate)
> >  {
> >  	struct hdac_bus *bus = codec->bus;
> >  	struct i915_audio_component *acomp = bus->audio_component;
> > @@ -212,7 +213,7 @@ int snd_hdac_sync_audio_rate(struct hdac_device *codec, hda_nid_t nid, int rate)
> >  	port = pin2port(codec, nid);
> >  	if (port < 0)
> >  		return -EINVAL;
> > -	return acomp->ops->sync_audio_rate(acomp->dev, port, rate);
> > +	return acomp->ops->sync_audio_rate(acomp->dev, port, pipe, rate);
> >  }
> >  EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
> >  
> > @@ -236,7 +237,7 @@ EXPORT_SYMBOL_GPL(snd_hdac_sync_audio_rate);
> >   * thus it may be over @max_bytes.  If it's over @max_bytes, it implies
> >   * that only a part of ELD bytes have been fetched.
> >   */
> > -int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> > +int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid, int pipe,
> >  			   bool *audio_enabled, char *buffer, int max_bytes)
> >  {
> >  	struct hdac_bus *bus = codec->bus;
> > @@ -249,7 +250,7 @@ int snd_hdac_acomp_get_eld(struct hdac_device *codec, hda_nid_t nid,
> >  	port = pin2port(codec, nid);
> >  	if (port < 0)
> >  		return -EINVAL;
> > -	return acomp->ops->get_eld(acomp->dev, port, audio_enabled,
> > +	return acomp->ops->get_eld(acomp->dev, port, pipe, audio_enabled,
> >  				   buffer, max_bytes);
> >  }
> >  EXPORT_SYMBOL_GPL(snd_hdac_acomp_get_eld);
> > diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
> > index d0d5ad8..67890df 100644
> > --- a/sound/pci/hda/patch_hdmi.c
> > +++ b/sound/pci/hda/patch_hdmi.c
> > @@ -1485,7 +1485,7 @@ static void sync_eld_via_acomp(struct hda_codec *codec,
> >  
> >  	mutex_lock(&per_pin->lock);
> >  	eld->monitor_present = false;
> > -	size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid,
> > +	size = snd_hdac_acomp_get_eld(&codec->core, per_pin->pin_nid, -1,
> >  				      &eld->monitor_present, eld->eld_buffer,
> >  				      ELD_MAX_SIZE);
> >  	if (size > 0) {
> > @@ -1739,7 +1739,8 @@ static int generic_hdmi_playback_pcm_prepare(struct hda_pcm_stream *hinfo,
> >  	/* Call sync_audio_rate to set the N/CTS/M manually if necessary */
> >  	/* Todo: add DP1.2 MST audio support later */
> >  	if (codec_has_acomp(codec))
> > -		snd_hdac_sync_audio_rate(&codec->core, pin_nid, runtime->rate);
> > +		snd_hdac_sync_audio_rate(&codec->core, pin_nid, -1,
> > +					 runtime->rate);
> >  
> >  	non_pcm = check_non_pcm_per_cvt(codec, cvt_nid);
> >  	mutex_lock(&per_pin->lock);
> > @@ -2285,7 +2286,7 @@ static void haswell_set_power_state(struct hda_codec *codec, hda_nid_t fg,
> >  	snd_hda_codec_set_power_to_all(codec, fg, power_state);
> >  }
> >  
> > -static void intel_pin_eld_notify(void *audio_ptr, int port)
> > +static void intel_pin_eld_notify(void *audio_ptr, int port, int pipe)
> >  {
> >  	struct hda_codec *codec = audio_ptr;
> >  	int pin_nid;
> > diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
> > index 2abb742..cf57ab3 100644
> > --- a/sound/soc/codecs/hdac_hdmi.c
> > +++ b/sound/soc/codecs/hdac_hdmi.c
> > @@ -1366,7 +1366,7 @@ static int hdac_hdmi_parse_and_map_nid(struct hdac_ext_device *edev,
> >  	return hdac_hdmi_init_dai_map(edev);
> >  }
> >  
> > -static void hdac_hdmi_eld_notify_cb(void *aptr, int port)
> > +static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
> >  {
> >  	struct hdac_ext_device *edev = aptr;
> >  	struct hdac_hdmi_priv *hdmi = edev->private_data;
> > -- 
> > 2.5.0
> 



More information about the Alsa-devel mailing list