[alsa-devel] [RESEND PATCH v2 1/1] ASoC: dwc: fix dma stop transferring issue

Mark Brown broonie at kernel.org
Fri Oct 2 19:03:11 CEST 2015


On Thu, Oct 01, 2015 at 10:24:42AM +0800, yitian wrote:

> I think maybe two reasons:
> 1. designware I2S IP in my chipset(new design) is using tx empty and rx
> available signal as the DMA handshaking signal, but it may be not true
> for all chipsets. If I2S has separate signal as DMA handshaking signal, mask
> irq should not impact DMA transfer. But Synopsys's engineer recommend us to
> use
> tx and rx irq signal as the DMA handshaking signal, meanwhile we cannot find
> separate DMA handshaking signal from designware's IP spec, that's why tx/rx
> irq
> will impact DMA transfer.

If that's what the Synopsis engineers recommend I'd guess that other
integrations are doing the same thing.

> 2. I am using a FPGA for test, the cpu frequency of it is only 26MHz, that
> means
> XRUN is very easy to happen on my board. But I guess most of the developers
> are using real chipset which can have at least 600MHz frequency so XRUN is
> not easy to be reproduced. As my test, No XUN, no this bug...

Ah, that might be it - it might just be that other systems are working
due to race conditions.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20151002/bd2aa600/attachment.sig>


More information about the Alsa-devel mailing list