[alsa-devel] ASoC: PATCH: wm8731 - reinitialize regmap cache after hardware reset

Liam Girdwood liam.r.girdwood at linux.intel.com
Thu May 28 18:52:46 CEST 2015


Hi Sergey,

Best to always CC Mark on any ASoC patches, I've also added Richard from
Wolfson. Best to read submitting patches from the Documentation
directory too :) 

On Thu, 2015-05-28 at 09:34 -0700, Sergey Kiselev wrote:
> Hi,
> 
> I am working on a machine driver that uses wm8731 codec and I've
> noticed that it will not work after rmmod/modprobe of that machine
> driver. The issue is that wm8731_probe() resets the hardware, but it
> doesn't reinitialize the regmap cache to the default values.
> 
> The patch below fixes this issue.
> 
> I also skimmed through other codecs, and some of them might have
> similar issue (wm8510.c, wm8711.c, wm8750.c, wm8753.c, wm8940.c,
> wm8960.c, wm8971.c, wm8974.c, wm8988.c, wm8990.c)
> 

Richard, can Wolfson take care of these ones. I guess some of the older
codecs have no way to reset the registers ?

> Another way to avoid this issue might be resetting the codec in the
> *_spi_probe()/*_i2c_probe(), so that it only gets reset once when
> codec is loading.
> 
> Thanks in advance for any comments/suggestions on the patch.
> 
> Thanks,
> Sergey
> 
> Signed-off-by: Sergey Kiselev <skiselev at gmail.com>
> 
> diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
> index 2245b6a..76af75b 100644
> --- a/sound/soc/codecs/wm8731.c
> +++ b/sound/soc/codecs/wm8731.c
> @@ -84,7 +84,7 @@ static bool wm8731_writeable(struct device *dev,
> unsigned int reg)
>   return reg <= WM8731_RESET;
>  }
> 
> -#define wm8731_reset(c) snd_soc_write(c, WM8731_RESET, 0)

I would have expected this to reset the register values so I'm not sure
why it's failing in your case ?

> +static int wm8731_reset(struct snd_soc_codec *codec);
> 
>  static const char *wm8731_input_select[] = {"Line In", "Mic"};
> 
> @@ -665,6 +665,21 @@ static const struct regmap_config wm8731_regmap = {
>   .num_reg_defaults = ARRAY_SIZE(wm8731_reg_defaults),
>  };
> 
> +static int wm8731_reset(struct snd_soc_codec *codec)
> +{
> + int ret;
> + struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(codec);
> +
> + ret = snd_soc_write(codec, WM8731_RESET, 0);
> +
> + if (ret != 0)
> + return ret;
> +
> + regmap_reinit_cache(wm8731->regmap, &wm8731_regmap);
> +
> + return 0;
> +}
> +

Your mailer has screwed up the formatting here :(

>  #if defined(CONFIG_SPI_MASTER)
>  static int wm8731_spi_probe(struct spi_device *spi)
>  {

Liam



More information about the Alsa-devel mailing list