[alsa-devel] [PATCH 6/7] ASoC: Intel: Skylake: Add SKL DSP initialization
Vinod Koul
vinod.koul at intel.com
Fri Jul 10 18:48:44 CEST 2015
From: "Subhransu S. Prusty" <subhransu.s.prusty at intel.com>
This adds the dsp and ipc initialization for the Skylake platform.
It also requests firmware and uses code loader dma to load it.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty at intel.com>
Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
---
sound/soc/intel/skylake/Makefile | 3 +-
sound/soc/intel/skylake/skl-sst-dsp.h | 11 ++
sound/soc/intel/skylake/skl-sst-ipc.c | 2 +
sound/soc/intel/skylake/skl-sst.c | 280 ++++++++++++++++++++++++++++++++++
4 files changed, 295 insertions(+), 1 deletion(-)
create mode 100644 sound/soc/intel/skylake/skl-sst.c
diff --git a/sound/soc/intel/skylake/Makefile b/sound/soc/intel/skylake/Makefile
index eff3e1758b89..1fccb378e62c 100644
--- a/sound/soc/intel/skylake/Makefile
+++ b/sound/soc/intel/skylake/Makefile
@@ -3,6 +3,7 @@ snd-soc-skl-objs := skl.o skl-pcm.o
obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += snd-soc-skl.o
# Skylake IPC Support
-snd-soc-skl-ipc-objs := skl-sst-ipc.o skl-sst-dsp.o skl-sst-cldma.o
+snd-soc-skl-ipc-objs := skl-sst-ipc.o skl-sst-dsp.o skl-sst-cldma.o \
+ skl-sst.o
obj-$(CONFIG_SND_SOC_INTEL_SKYLAKE) += snd-soc-skl-ipc.o
diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h
index e8ce1364bf7b..6bfcef449bdc 100644
--- a/sound/soc/intel/skylake/skl-sst-dsp.h
+++ b/sound/soc/intel/skylake/skl-sst-dsp.h
@@ -16,10 +16,12 @@
#ifndef __SKL_SST_DSP_H__
#define __SKL_SST_DSP_H__
+#include <linux/interrupt.h>
#include <sound/memalloc.h>
#include "skl-sst-cldma.h"
struct sst_dsp;
+struct skl_sst;
struct sst_dsp_device;
/* Intel HD Audio General DSP Registers */
@@ -62,6 +64,11 @@ struct sst_dsp_device;
#define SKL_ADSP_W1_SZ 0x1000
+#define SKL_FW_STS_MASK 0xf
+
+#define SKL_FW_INIT 0x1
+#define SKL_FW_RFW_START 0xf
+
#define SKL_ADSPIC_IPC 1
#define SKL_ADSPIS_IPC 1
@@ -106,6 +113,7 @@ struct skl_dsp_fw_ops {
int (*parse_fw)(struct sst_dsp *ctx);
int (*set_state_D0)(struct sst_dsp *ctx);
int (*set_state_D3)(struct sst_dsp *ctx);
+ unsigned int (*get_fw_errcode)(struct sst_dsp *ctx);
};
struct skl_dsp_loader_ops {
@@ -130,5 +138,8 @@ int skl_dsp_sleep(struct sst_dsp *ctx);
void skl_dsp_free(struct sst_dsp *dsp);
int skl_dsp_boot(struct sst_dsp *ctx);
+int skl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq,
+ struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp);
+void skl_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx);
#endif /*__SKL_SST_DSP_H__*/
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c
index bd5ac4165151..c0d092861337 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.c
+++ b/sound/soc/intel/skylake/skl-sst-ipc.c
@@ -496,6 +496,8 @@ void skl_ipc_free(struct sst_generic_ipc *ipc)
/* Disable IPC BUSY interrupt */
sst_dsp_shim_update_bits(ipc->dsp, SKL_ADSP_REG_HIPCCTL,
SKL_ADSP_REG_HIPCCTL_BUSY, 0);
+
+ sst_ipc_fini(ipc);
}
int skl_ipc_create_pipeline(struct sst_generic_ipc *ipc,
diff --git a/sound/soc/intel/skylake/skl-sst.c b/sound/soc/intel/skylake/skl-sst.c
new file mode 100644
index 000000000000..c18ea51b7484
--- /dev/null
+++ b/sound/soc/intel/skylake/skl-sst.c
@@ -0,0 +1,280 @@
+/*
+ * skl-sst.c - HDA DSP library functions for SKL platform
+ *
+ * Copyright (C) 2014-15, Intel Corporation.
+ * Author:Rafal Redzimski <rafal.f.redzimski at intel.com>
+ * Jeeja KP <jeeja.kp at intel.com>
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include "../common/sst-dsp.h"
+#include "../common/sst-dsp-priv.h"
+#include "../common/sst-ipc.h"
+#include "skl-sst-ipc.h"
+
+#define SKL_BASEFW_TIMEOUT 300
+#define SKL_INIT_TIMEOUT 1000
+
+/* Intel HD Audio SRAM Window 0*/
+#define SKL_ADSP_SRAM0_BASE 0x8000
+
+/* Firmware status window */
+#define SKL_ADSP_FW_STATUS SKL_ADSP_SRAM0_BASE
+#define SKL_ADSP_ERROR_CODE (SKL_ADSP_FW_STATUS + 0x4)
+
+#define SKL_INSTANCE_ID 0
+#define SKL_BASE_FW_MODULE_ID 0
+
+static bool skl_check_fw_status(struct sst_dsp *ctx, u32 status)
+{
+ u32 cur_sts;
+
+ cur_sts = sst_dsp_shim_read(ctx, SKL_ADSP_FW_STATUS) & SKL_FW_STS_MASK;
+
+ return (cur_sts == status);
+}
+
+static int skl_transfer_firmware(struct sst_dsp *ctx,
+ const void *basefw, u32 base_fw_size)
+{
+ int ret = 0;
+
+ ret = ctx->cl_dev.ops.cl_copy_to_dmabuf(ctx, basefw, base_fw_size);
+ if (ret < 0)
+ return ret;
+
+ ret = sst_dsp_register_poll(ctx,
+ SKL_ADSP_FW_STATUS,
+ SKL_FW_STS_MASK,
+ SKL_FW_RFW_START,
+ SKL_BASEFW_TIMEOUT,
+ "Firmware boot");
+
+ ctx->cl_dev.ops.cl_stop_dma(ctx);
+
+ return ret;
+}
+
+static int skl_load_base_firmware(struct sst_dsp *ctx)
+{
+ int ret = 0, i;
+ const struct firmware *fw = NULL;
+ struct skl_sst *skl = ctx->thread_context;
+ u32 reg;
+
+ ret = request_firmware(&fw, "dsp_fw_release.bin", ctx->dev);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Request firmware failed %d\n", ret);
+ skl_dsp_disable_core(ctx);
+ return -EIO;
+ }
+
+ /* enable Interrupt */
+ skl_ipc_int_enable(ctx);
+ skl_ipc_op_int_enable(ctx);
+
+ /* check ROM Status */
+ for (i = SKL_INIT_TIMEOUT; i > 0; --i) {
+ if (skl_check_fw_status(ctx, SKL_FW_INIT)) {
+ dev_dbg(ctx->dev,
+ "ROM loaded, we can continue with FW loading\n");
+ break;
+ }
+ mdelay(1);
+ }
+ if (!i) {
+ reg = sst_dsp_shim_read(ctx, SKL_ADSP_FW_STATUS);
+ dev_err(ctx->dev,
+ "Timeout waiting for ROM init done, reg:0x%x\n", reg);
+ ret = -EIO;
+ goto skl_load_base_firmware_failed;
+ }
+
+ ret = skl_transfer_firmware(ctx, fw->data, fw->size);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Transfer firmware failed%d\n", ret);
+ goto skl_load_base_firmware_failed;
+ } else {
+ ret = wait_event_timeout(skl->boot_wait, skl->boot_complete,
+ msecs_to_jiffies(SKL_IPC_BOOT_MSECS));
+ if (ret == 0) {
+ dev_err(ctx->dev, "DSP boot failed, FW Ready timed-out\n");
+ ret = -EIO;
+ goto skl_load_base_firmware_failed;
+ }
+
+ dev_dbg(ctx->dev, "Download firmware successful%d\n", ret);
+ skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING);
+ }
+ release_firmware(fw);
+
+ return 0;
+
+skl_load_base_firmware_failed:
+ skl_dsp_disable_core(ctx);
+ release_firmware(fw);
+ return ret;
+}
+
+static int skl_set_dsp_D0(struct sst_dsp *ctx)
+{
+ int ret;
+
+ ret = skl_load_base_firmware(ctx);
+ if (ret < 0) {
+ dev_err(ctx->dev, "unable to load firmware\n");
+ return ret;
+ }
+
+ skl_dsp_set_state_locked(ctx, SKL_DSP_RUNNING);
+
+ return ret;
+}
+
+static int skl_set_dsp_D3(struct sst_dsp *ctx)
+{
+ int ret;
+ struct skl_ipc_dxstate_info dx;
+ struct skl_sst *skl = ctx->thread_context;
+
+ dev_dbg(ctx->dev, "In %s:\n", __func__);
+ mutex_lock(&ctx->mutex);
+ if (!is_skl_dsp_running(ctx)) {
+ mutex_unlock(&ctx->mutex);
+ return 0;
+ }
+ mutex_unlock(&ctx->mutex);
+
+ dx.core_mask = SKL_DSP_CORE0_MASK;
+ dx.dx_mask = SKL_IPC_D3_MASK;
+ ret = skl_ipc_set_dx(&skl->ipc, SKL_INSTANCE_ID, SKL_BASE_FW_MODULE_ID, &dx);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Failed to set DSP to D3 state\n");
+ return ret;
+ }
+
+ ret = skl_dsp_disable_core(ctx);
+ if (ret < 0) {
+ dev_err(ctx->dev, "disable dsp core failed ret: %d\n", ret);
+ ret = -EIO;
+ }
+ skl_dsp_set_state_locked(ctx, SKL_DSP_RESET);
+
+ return ret;
+}
+
+static unsigned int skl_get_errorcode(struct sst_dsp *ctx)
+{
+ return sst_dsp_shim_read(ctx, SKL_ADSP_ERROR_CODE);
+}
+
+static struct skl_dsp_fw_ops skl_fw_ops = {
+ .set_state_D0 = skl_set_dsp_D0,
+ .set_state_D3 = skl_set_dsp_D3,
+ .load_fw = skl_load_base_firmware,
+ .get_fw_errcode = skl_get_errorcode,
+};
+
+static struct sst_ops skl_ops = {
+ .irq_handler = skl_dsp_sst_interrupt,
+ .write = sst_shim32_write,
+ .read = sst_shim32_read,
+ .ram_read = sst_memcpy_fromio_32,
+ .ram_write = sst_memcpy_toio_32,
+ .free = skl_dsp_free,
+};
+
+static struct sst_dsp_device skl_dev = {
+ .thread = skl_dsp_irq_thread_handler,
+ .ops = &skl_ops,
+};
+
+int skl_sst_dsp_init(struct device *dev, void __iomem *mmio_base, int irq,
+ struct skl_dsp_loader_ops dsp_ops, struct skl_sst **dsp)
+{
+ struct skl_sst *skl;
+ struct sst_dsp *sst;
+ int ret;
+
+ skl = devm_kzalloc(dev, sizeof(*skl), GFP_KERNEL);
+ if (skl == NULL)
+ return -ENOMEM;
+
+ skl->dev = dev;
+ skl_dev.thread_context = skl;
+
+ skl->dsp = skl_dsp_ctx_init(dev, &skl_dev, irq);
+ if (!skl->dsp) {
+ dev_err(skl->dev, "%s: no device\n", __func__);
+ return -ENODEV;
+ }
+
+ sst = skl->dsp;
+
+ sst->addr.lpe = mmio_base;
+ sst->addr.shim = mmio_base;
+ sst_dsp_mailbox_init(sst, (SKL_ADSP_SRAM0_BASE + SKL_ADSP_W0_STAT_SZ),
+ SKL_ADSP_W0_UP_SZ, SKL_ADSP_SRAM1_BASE, SKL_ADSP_W1_SZ);
+
+ sst->dsp_ops = dsp_ops;
+ sst->fw_ops = skl_fw_ops;
+
+ ret = skl_ipc_init(dev, skl);
+ if (ret)
+ return ret;
+
+ skl->boot_complete = false;
+ init_waitqueue_head(&skl->boot_wait);
+
+ ret = skl_dsp_boot(sst);
+ if (ret < 0) {
+ dev_err(skl->dev, "Boot dsp core failed ret: %d", ret);
+ goto free_ipc;
+ }
+
+ ret = skl_cldma_prepare(sst);
+ if (ret < 0) {
+ dev_err(dev, "CL dma prepare failed : %d", ret);
+ goto free_ipc;
+ }
+
+
+ ret = sst->fw_ops.load_fw(sst);
+ if (ret < 0) {
+ dev_err(dev, "Load base fw failed : %d", ret);
+ return ret;
+ }
+
+ if (dsp)
+ *dsp = skl;
+
+ return 0;
+
+free_ipc:
+ skl_ipc_free(&skl->ipc);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(skl_sst_dsp_init);
+
+void skl_sst_dsp_cleanup(struct device *dev, struct skl_sst *ctx)
+{
+ skl_ipc_free(&ctx->ipc);
+ ctx->dsp->cl_dev.ops.cl_cleanup_controller(ctx->dsp);
+ ctx->dsp->ops->free(ctx->dsp);
+}
+EXPORT_SYMBOL_GPL(skl_sst_dsp_cleanup);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Intel Skylake IPC driver");
--
1.9.1
More information about the Alsa-devel
mailing list