[alsa-devel] No sound from speakers with Realtek ALC3226

[John Frankish]

> > > > 
> > > > I posted this on the alsa-user list, but did not get a reply.
> > > > 
> > > > Although it occasionally works, I am usually unable to get any 
> > > > sound out of the speakers on a dell latitude e7240 using 
> > > > alsa-1.0.28 and
> > > > linux-3.16.6 - see details at the end of the post.
> > >
> > > If so, Windows or BIOS is the problem.  It doesn't set up the pin
configuration properly Linux driver relies on.
> > >
> > I just updated the bios to the latest version, but no change :(
> > >
> > > If you get the status where the speaker works (e.g. after Windows
clean
> > reboot), try to take alsa-info.sh snapshot.  Run alsa-> info.sh with 
> > --no-upload option, and save the generated output.  Then, take another 
> > alsa-info.sh snapshot while the speaker > doesn't work.  Compare these 
> > two outputs.  (At best, attach both (compressed) files.)
> > >
> > Alsa_info_works and alsa_info_no_works attached - diff didn't show an 
> > obvious difference between getting sound from the speakers and not 
> > getting sound from the speakers.
>
> OK, then this is not about the pin configuration, but likely the EAPD
setup BIOS does.
>
> Did you try the newer kernels?  There has been a fix for EAPD control, and
this might already fix your problem.

I'd rather patch my current kernel if possible - do you know where the EPAD
control patch is by any chance?