[alsa-devel] [PATCH 4/9] ASoC: Intel: Skylake: Add FE and BE hw_params handling

Subhransu S. Prusty subhransu.s.prusty at intel.com
Fri Aug 7 21:36:19 CEST 2015


From: Jeeja KP <jeeja.kp at intel.com>

For FE and BE, the PCM parameters come from FE and BE hw_params values
passed. For a FE we convert the FE params to DSP expected module format
and pass to DSP. For a BE we need to find the gateway settings (i2s/PDM)
to be applied. These are queried from NHLT table and applied.

Further for BE based on direction the settings are applied as either source
or destination parameters.

These helpers here allow the format to be calculated and queried as per
firmware format.

Signed-off-by: Jeeja KP <jeeja.kp at intel.com>
Signed-off-by: Vinod Koul <vinod.koul at intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty at intel.com>
---
 sound/soc/intel/skylake/skl-topology.c | 274 +++++++++++++++++++++++++++++++++
 sound/soc/intel/skylake/skl-topology.h |  11 ++
 2 files changed, 285 insertions(+)

diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index deb5c0d..7f3c54a 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -752,3 +752,277 @@ static int skl_tplg_pga_event(struct snd_soc_dapm_widget *w,
 
 	return 0;
 }
+
+/*
+ * The FE params are passed by hw_params of the DAI.
+ * On hw_params, the params are stored in Gateway module of the FE and we
+ * need to calculate the format in DSP module configuration, that conversion
+ * is done here
+ */
+static void skl_tplg_update_pipe_params(struct device *dev,
+		struct skl_module_cfg *mconfig,
+		struct skl_pipe_params *params)
+{
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct skl_module_fmt *format = NULL;
+
+	memcpy(pipe->p_params, params, sizeof(*params));
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		format = &mconfig->in_fmt;
+	else
+		format = &mconfig->out_fmt;
+
+	/* set the hw_params */
+	format->s_freq = params->s_freq;
+	format->channels = params->ch;
+	format->valid_bit_depth = skl_get_bit_depth(params->s_fmt);
+
+	/*
+	 * 16 bit is 16 bit container whereas 24 bit is in 32 bit container so
+	 * update bit depth accordingly
+	 */
+	if (format->valid_bit_depth == SKL_DEPTH_16BIT)
+		format->bit_depth = format->valid_bit_depth;
+	else if (format->valid_bit_depth == SKL_DEPTH_24BIT)
+		format->bit_depth = SKL_DEPTH_32BIT;
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		mconfig->ibs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	} else {
+		mconfig->obs = (format->s_freq / 1000) *
+				(format->channels) *
+				(format->bit_depth >> 3);
+	}
+}
+
+/*
+ * Query the module config for the FE DAI
+ * This is used to find the hw_params set for that DAI and apply to FE
+ * pipeline
+ */
+static struct skl_module_cfg *
+skl_tplg_fe_get_cpr_module(struct snd_soc_dai *dai, int stream)
+{
+	struct snd_soc_dapm_widget *w;
+	struct snd_soc_dapm_path *p = NULL;
+
+	dev_dbg(dai->dev, "%s: enter, dai-name=%s\n", __func__, dai->name);
+
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		w = dai->playback_widget;
+		dev_dbg(dai->dev, "Stream name=%s\n", w->name);
+		list_for_each_entry(p, &w->sinks, list_source) {
+			if (p->connect && p->sink->power &&
+					is_skl_dsp_widget_type(p->sink))
+				continue;
+
+			if (p->sink->priv) {
+				dev_dbg(dai->dev, "set params for %s\n", p->sink->name);
+				return p->sink->priv;
+			}
+		}
+	} else {
+		w = dai->capture_widget;
+		dev_dbg(dai->dev, "Stream name=%s\n", w->name);
+		list_for_each_entry(p, &w->sources, list_sink) {
+			if (p->connect && p->source->power &&
+					is_skl_dsp_widget_type(p->source))
+				continue;
+
+			if (p->source->priv) {
+				dev_dbg(dai->dev, "set params for %s\n", p->source->name);
+				return p->source->priv;
+			}
+		}
+	}
+	return NULL;
+}
+
+int skl_tplg_fe_update_params(struct snd_soc_dai *dai,
+			struct skl_pipe_params *params)
+{
+	struct skl_module_cfg *m_cfg;
+
+	m_cfg = skl_tplg_fe_get_cpr_module(dai, params->stream);
+
+	if (m_cfg)
+		skl_tplg_update_pipe_params(dai->dev, m_cfg, params);
+
+	return 0;
+}
+
+static u8 skl_tplg_be_link_type(int dev_type)
+{
+	int ret;
+
+	switch (dev_type) {
+	case SKL_DEVICE_BT:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_DMIC:
+		ret = NHLT_LINK_DMIC;
+		break;
+
+	case SKL_DEVICE_I2S:
+		ret = NHLT_LINK_SSP;
+		break;
+
+	case SKL_DEVICE_HDALINK:
+		ret = NHLT_LINK_HDA;
+		break;
+
+	default:
+		ret = NHLT_LINK_INVALID;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * Fill the BE gateway parameters
+ * The BE gateway expects a blob of parameters which are kept in the ACPI
+ * NHLT blob, so query the blob for interface type (i2s/pdm) and instance.
+ * The port cna have multiple settings so pick based on the PCM
+ * parameters
+ */
+static int skl_tplg_be_fill_pipe_params(struct snd_soc_dai *dai,
+		struct skl_module_cfg *mconfig, struct skl_pipe_params *params)
+{
+	struct skl_pipe *pipe = mconfig->pipe;
+	struct nhlt_specific_cfg *cfg;
+	struct skl *skl = get_skl_ctx(dai->dev);
+	int link_type = skl_tplg_be_link_type(mconfig->dev_type);
+
+	memcpy(pipe->p_params, params, sizeof(*params));
+
+	/* update the blob based on virtual bus_id*/
+	cfg = (struct nhlt_specific_cfg *) skl_get_ep_blob(skl,
+			mconfig->vbus_id, link_type, params->s_fmt,
+			params->ch, params->s_freq, params->stream);
+
+	if (cfg) {
+		mconfig->formats_config.caps_size = cfg->size;
+		memcpy(mconfig->formats_config.caps, &cfg->caps, cfg->size);
+	} else {
+		dev_dbg(dai->dev, "Blob is NULL");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int skl_tplg_be_set_params(struct snd_soc_dai *dai,
+					struct snd_soc_dapm_widget *w,
+					struct skl_pipe_params *params)
+{
+	if (!w->power) {
+		dev_dbg(dai->dev, "set params for widget=%s\n", w->name);
+		return skl_tplg_be_fill_pipe_params(dai, w->priv, params);
+	}
+
+	return -EINVAL;
+}
+
+static int skl_tplg_be_set_src_pipe_params(struct snd_soc_dai *dai,
+						struct snd_soc_dapm_widget *w,
+						struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p;
+	int ret = 0;
+
+	dev_dbg(dai->dev, "In %swidget name=%s\n", __func__, w->name);
+
+	list_for_each_entry(p, &w->sources, list_sink) {
+		if (p->connect && is_skl_dsp_widget_type(p->source) &&
+						 p->source->priv) {
+			ret = skl_tplg_be_set_params(dai, p->source, params);
+
+			if (ret < 0)
+				return ret;
+		} else {
+			ret = skl_tplg_be_set_src_pipe_params(dai, p->source,
+									 params);
+		}
+	}
+
+	return ret;
+}
+
+static int skl_tplg_be_set_sink_pipe_params(struct snd_soc_dai *dai,
+	struct snd_soc_dapm_widget *w, struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_path *p = NULL;
+	int ret = 0;
+
+	dev_dbg(dai->dev, "widget name=%s\n", w->name);
+
+	list_for_each_entry(p, &w->sinks, list_source) {
+		if (p->connect && is_skl_dsp_widget_type(p->sink) &&
+						p->sink->priv) {
+			ret = skl_tplg_be_set_params(dai, p->sink, params);
+
+			if (ret < 0)
+				return ret;
+		} else {
+			ret = skl_tplg_be_set_sink_pipe_params(dai, p->sink,
+									 params);
+		}
+	}
+
+	return ret;
+}
+
+/*
+ * BE hw_params can be a source parameters (capture) or sink parameters
+ * (playback). Based on sink and source we need to either find the source
+ * list or the sink list and set the pipeline parameters
+ */
+int skl_tplg_be_update_params(struct snd_soc_dai *dai,
+				struct skl_pipe_params *params)
+{
+	struct snd_soc_dapm_widget *w;
+
+	dev_dbg(dai->dev, "In %s dai-name=%s\n", __func__, dai->name);
+
+	if (params->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		w = dai->playback_widget;
+
+		dev_dbg(dai->dev, "Stream name=%s\n", w->name);
+		return skl_tplg_be_set_src_pipe_params(dai, w, params);
+	}
+
+	if (params->stream == SNDRV_PCM_STREAM_CAPTURE) {
+		w = dai->capture_widget;
+
+		dev_dbg(dai->dev, "Stream name=%s\n", w->name);
+		return skl_tplg_be_set_sink_pipe_params(dai, w, params);
+	}
+
+	return 0;
+}
+
+/* Run/Stop the FE pipeline */
+int skl_tplg_set_fe_pipeline_state(struct snd_soc_dai *dai, bool start,
+								int stream)
+{
+	struct skl *skl = get_skl_ctx(dai->dev);
+	struct skl_sst *ctx = skl->skl_sst;
+	struct skl_module_cfg *mconfig = NULL;
+
+	dev_dbg(dai->dev, "%s: enter, dai-name=%s dir=%d\n", __func__, dai->name, stream);
+
+	mconfig = skl_tplg_fe_get_cpr_module(dai, stream);
+	if (mconfig != NULL) {
+		if (start)
+			return skl_run_pipe(ctx, mconfig->pipe);
+		else
+			return skl_stop_pipe(ctx, mconfig->pipe);
+	}
+
+	return 0;
+}
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index 73d7916..94c721e 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -273,6 +273,17 @@ struct skl_dapm_path_list {
 	struct list_head node;
 };
 
+int skl_tplg_fe_update_params(struct snd_soc_dai *dai,
+	struct skl_pipe_params *params);
+int skl_tplg_be_update_params(struct snd_soc_dai *dai,
+	struct skl_pipe_params *params);
+void skl_tplg_set_be_dmic_config(struct snd_soc_dai *dai,
+	struct skl_pipe_params *params, int stream);
+int skl_tplg_init(struct snd_soc_platform *platform,
+				struct hdac_ext_bus *ebus);
+int skl_tplg_set_fe_pipeline_state(struct snd_soc_dai *dai,
+			bool start, int stream);
+
 int skl_create_pipeline(struct skl_sst *ctx, struct skl_pipe *pipe);
 
 int skl_run_pipe(struct skl_sst *ctx, struct skl_pipe *pipe);
-- 
2.4.3



More information about the Alsa-devel mailing list