[alsa-devel] [PATCH 3/6] ASoC: fsl_ssi: enable AC'97 asymmetric rates

Markus Pargmann mpa at pengutronix.de
Sun Aug 2 20:46:37 CEST 2015


Hi,

On Fri, Jul 31, 2015 at 04:38:20PM +0200, Maciej S. Szmigiero wrote:
> Hi Markus,
> 
> Thanks for looking into the changes.
> 
> On 31.07.2015 07:53, Markus Pargmann wrote:
> > On Fri, Jul 31, 2015 at 07:27:19AM +0200, Markus Pargmann wrote:
> >> Hi,
> >>
> >> On Thu, Jul 30, 2015 at 04:34:19PM +0200, Maciej S. Szmigiero wrote:
> >>> AC'97 bus can support asymmetric playback/capture rates
> >>> so enable them in this case in fsl_ssi driver.
> >>>
> >>> Signed-off-by: Maciej Szmigiero <mail at maciej.szmigiero.name>
> >>> ---
> >>>  sound/soc/fsl/fsl_ssi.c |    4 +++-
> >>>  1 files changed, 3 insertions(+), 1 deletions(-)
> >>>
> >>> diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
> >>> index a83b900..7f4f0b9 100644
> >>> --- a/sound/soc/fsl/fsl_ssi.c
> >>> +++ b/sound/soc/fsl/fsl_ssi.c
> >>> @@ -1377,7 +1377,9 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> >>>  
> >>>  	/* Are the RX and the TX clocks locked? */
> >>>  	if (!of_find_property(np, "fsl,ssi-asynchronous", NULL)) {
> >>> -		ssi_private->cpu_dai_drv.symmetric_rates = 1;
> >>> +		if (!fsl_ssi_is_ac97(ssi_private))
> >>> +			ssi_private->cpu_dai_drv.symmetric_rates = 1;
> >>> +
> >>
> >> Why don't you use the DT property that is parsed here to enable
> >> asymmetric rates?
> 
> Because in the AC'97 mode the driver supports only one channel config and one sample format
> anyway the remaining settings controlled by this property don't do anything.
> 
> Since it should be safe to enable asymmetric rates with any AC'97 CODEC I think it is good
> to do it in driver than to add "fsl,ssi-asynchronous" to every AC'97 DT node.
> 
> Also the description of this property in fsl,ssi.txt looks like that it only makes sense in
> non-AC'97 mode.
> 
> > Just found the last version of this series. Please use v2 and describe
> > changes for a new iteration of a series.
> 
> This is just a resubmission, there are no functional differences since
> it was originally submitted a month ago. 

I see, 'RESEND' tag would be helpful then.

> 
> > There is also a different setup with AC97 which does not use DMA. See
> > the long comment at the top of the file about how ac97 is already used.
> 
> I understand that the problem with FIQ handler described in comment
> on top of fsl_ssi.c only pertains incoming data, that is capture.
> 
> This patch effectively does not touch capture rates as they are already
> limited to 48kHz only since this is the only capture rate defined in
> fsl_ssi AC'97 DAI driver capture capabilities.

Ok, great.

Thanks,

Markus

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20150802/cadb67e9/attachment.sig>


More information about the Alsa-devel mailing list