[alsa-devel] [PATCH 2/3] ASoC: tas571x: New driver for TI TAS571x power amplifiers

[Mark Brown]

On Thu, Apr 23, 2015 at 05:47:49PM -0700, Kevin Cernekee wrote:

> This is mostly working OK, but regcache_sync() assumes that the
> hardware registers have been reset back to the default values.  The
> "pdn" GPIO doesn't actually reset the state of the tas571x; it just
> makes I2C inaccessible and inhibits audio output.  So if the factory
> default for mute is 0, corner cases like this fail:

...

> Aside from unnecessarily pulsing the reset GPIO when transitioning
> back from SND_SOC_BIAS_OFF or overriding regcache_default_sync(), can
> you think of a way to work around this?

Do you need to work around it?  If the register map is being perserved
you don't need to sync so just don't do it - it's just that the normal
expectation would be that power down would cause the register map to be
reset.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20150424/7a812e19/attachment.sig>